On Tue, Apr 23, 2002 at 01:44:40PM -0400, David Gilbert wrote: > I believe this is due to the SCSI disk having software that will > momentarily stop processing requests to perform a recalibration > ... where IDE drives may only do this when they are idle for some > small period of time.
Another reason is that IDE drives often have higher densities. A 160 GB SCSI disk have a lot of plates (8?), while IDE drives with the same capacity typicly have only one or two. It basicly means that the disk is more sensitive to errors. (Numbers above may not be correct for all IDE and SCSI-disks, they are just meant as an illustration) This, like many other IDE/SCSI issues is not a IDE-problem per-say - it's just (like it was written earlier in the thread) that SCSI-disks are typicly designed for servers, while IDE disks are typicly designed for workstations. -- Ragnar Kjørstad Big Storage ---------------------------(end of broadcast)--------------------------- TIP 2: you can get off all lists at once with the unregister command (send "unregister YourEmailAddressHere" to [EMAIL PROTECTED])