I'm not sure how to get the version however given the below listing
of /boot/grub/grub.conf it's obviously Cent OS:
#boot=/dev/sda
default=0
timeout=5
splashimage=(hd0,0)/grub/splash.xpm.gz
hiddenmenu
title CentOS (2.6.18-8.1.6.el5)
root (hd0,0)
kernel /vmlinuz-2.6.18-8.1.6.el5 ro root=/dev/VolGroup00/
LogVol00 clock=
pit noapic nolapic rhgb quiet
initrd /initrd-2.6.18-8.1.6.el5.img
title CentOS (2.6.18-8.el5)
root (hd0,0)
kernel /vmlinuz-2.6.18-8.el5 ro root=/dev/VolGroup00/LogVol00
rhgb quiet
initrd /initrd-2.6.18-8.el5.img
I also did a uname -a:
[EMAIL PROTECTED] ~]# uname -a
Linux vmsrv02.myclient.local 2.6.18-8.1.6.el5 #1 SMP Thu Jun 14 17:29:04
EDT 2007 x86_64 x86_64 x86_64 GNU/Linux
I ran the telnet command and got this:
-bash-3.1$ telnet 192.168.111.11 5432
Trying 192.168.111.11...
telnet: connect to address 192.168.111.11: No route to host
telnet: Unable to connect to remote host: No route to host
However a ping works:
-bash-3.1$ ping 192.168.111.11
PING 192.168.111.11 (192.168.111.11) 56(84) bytes of data.
64 bytes from 192.168.111.11: icmp_seq=1 ttl=64 time=0.438 ms
64 bytes from 192.168.111.11: icmp_seq=2 ttl=64 time=0.168 ms
64 bytes from 192.168.111.11: icmp_seq=3 ttl=64 time=0.232 ms
Thanks for the help...
/Kevin
[EMAIL PROTECTED] ~]#On Mar 28, 2008, at 11:03 AM, Jonathan Nalley wrote:
Could you send us the distro and version of Linux that you're using
on these two boxes?
Just as a sanity check and assuming you have a telnet client on the .
13 box, can you perform the following command:
telnet 192.168.111.11 5432
and then paste the output to us. I guess conceptually there's not a
whole lot of difference between doing that and using psql -h
192.168.111.11 but it might eliminate some layer of issues. If
you're familiar with nmap or similar programs you can accomplish the
same thing to ping .11 on port 5432
-----Original Message-----
From: kevin kempter [mailto:[EMAIL PROTECTED]
Sent: Friday, March 28, 2008 12:56
To: Jonathan Nalley
Cc: 'pgsql-admin@postgresql.org'
Subject: Re: [ADMIN] weird network issue
Not sure. I'm not so well versed in the firewall/networking areas. I
can however do an scp pull from both machines :
scp a file from 192.168.111.13 while logged onto 192.168.111.11
and
scp a file from 192.168.111.11 while logged onto 192.168.111.13
Can you point me where to look for firewall/iptables/SE issues?
Thanks in advance
On Mar 28, 2008, at 10:45 AM, Jonathan Nalley wrote:
are you running any kind of firewall/iptables/SELinux where the
settings are perhaps not the same on the two machines?
From: [EMAIL PROTECTED] [mailto:pgsql-admin-
[EMAIL PROTECTED]
] On Behalf Of kevin kempter
Sent: Friday, March 28, 2008 12:31
To: pgsql-admin@postgresql.org
Subject: [ADMIN] weird network issue
Hi LIst;
I have 2 Linux servers:
192.168.111.11
192.168.111.13
Both are running postgres v 8.2.6
I can ping the .11 box from .13 and vice versa
I can connect remotely from the .11 box to the .13 box but I cannot
connect to the .11 box from the .13 box.
I can do this:
on the 192.168.111.11 box:
-bash-3.1$ psql -h 192.168.111.13
Welcome to psql 8.2.6, the PostgreSQL interactive terminal.
Type: \copyright for distribution terms
\h for help with SQL commands
\? for help with psql commands
\g or terminate with semicolon to execute query
\q to quit
postgres=#
However if I do this it fails:
on the 192.168.111.13 box:
-bash-3.1$ psql -h 192.168.111.11 postgres
psql: could not connect to server: No route to host
Is the server running on host "192.168.111.11" and accepting
TCP/IP connections on port 5432?
Both boxes have the same copy of the postgresql.conf file and the
pg_hba.conf file.
Here's the listen address setting (on the 192.168.111.11 box) from
the postgresql.conf file:
listen_addresses = '*'
I also checked (after a restart) that the listen address and port
was in fact as I thought
on 192.168.111.11 :
Welcome to psql 8.2.6, the PostgreSQL interactive terminal.
Type: \copyright for distribution terms
\h for help with SQL commands
\? for help with psql commands
\g or terminate with semicolon to execute query
\q to quit
postgres=# show listen_addresses;
listen_addresses
------------------
*
(1 row)
postgres=# show port
;
port
------
5432
(1 row)
postgres=#
Here's the current pg_hba.conf file on 192.168.111.11 :
# TYPE DATABASE USER CIDR-ADDRESS METHOD
# "local" is for Unix domain socket connections only
local all all ident sameuser
# IPv4 local connections:
host all all 127.0.0.1/32 ident sameuser
# IPv6 local connections:
host all all ::1/128 ident sameuser
#DRW. This should be tighted up once the db instances are figured
out
host all all 192.168.111.0/24 trust
I'm stumped..
Anyone have any thoughts ?
Thanks in advance.
--
Sent via pgsql-admin mailing list (pgsql-admin@postgresql.org)
To make changes to your subscription:
http://www.postgresql.org/mailpref/pgsql-admin