On Wed, Aug 10, 2022, at 9:39 AM, osumi.takami...@fujitsu.com wrote: > Minor review comments for v6. Thanks for your review. I'm attaching v7.
> "If the subscriber sets min_apply_delay parameter, ..." > > I suggest we use subscription rather than subscriber, because > this parameter refers to and is used for one subscription. > My suggestion is > "If one subscription sets min_apply_delay parameter, ..." > In case if you agree, there are other places to apply this change. I changed the terminology to subscription. I also checked other "subscriber" occurrences but I don't think it should be changed. Some of them are used as publisher/subscriber pair. If you think there is another sentence to consider, point it out. > It might be better to write a note for committer > like "Bump catalog version" at the bottom of the commit message. It is a committer task to bump the catalog number. IMO it is easy to notice (using a git hook?) that it must bump it when we are modifying the catalog. AFAICS there is no recommendation to add such a warning. > The former interprets input number as milliseconds in case of no units, > while the latter takes it as seconds without units. > I feel it would be better to make them aligned. In a previous version I decided not to add a code to attach a unit when there isn't one. Instead, I changed the documentation to reflect what interval_in uses (seconds as unit). Under reflection, let's use ms as default unit if the user doesn't specify one. I fixed all the other suggestions too. -- Euler Taveira EDB https://www.enterprisedb.com/
From a28987c8adb70d6932558f5e39f9dd4c55223a30 Mon Sep 17 00:00:00 2001 From: Euler Taveira <euler.tave...@enterprisedb.com> Date: Sat, 6 Nov 2021 11:31:10 -0300 Subject: [PATCH v7] Time-delayed logical replication subscriber Similar to physical replication, a time-delayed copy of the data for logical replication is useful for some scenarios (particularly to fix errors that might cause data loss). If the subscription sets min_apply_delay parameter, the logical replication worker will delay the transaction commit for min_apply_delay milliseconds. The delay is calculated between the WAL time stamp and the current time on the subscriber. The delay occurs only on WAL records for transaction begins. The main reason is to avoid keeping a transaction open for a long time. Regular and prepared transactions are covered. Streamed transactions are also covered. Author: Euler Taveira Discussion: https://postgr.es/m/CAB-JLwYOYwL=xtyaxkih5ctm_vm8kjkh7aaitckvmch4rzr...@mail.gmail.com --- doc/src/sgml/catalogs.sgml | 10 ++ doc/src/sgml/ref/alter_subscription.sgml | 5 +- doc/src/sgml/ref/create_subscription.sgml | 43 +++++- src/backend/catalog/pg_subscription.c | 1 + src/backend/catalog/system_views.sql | 7 +- src/backend/commands/subscriptioncmds.c | 59 +++++++- src/backend/replication/logical/worker.c | 100 +++++++++++++ src/backend/utils/adt/timestamp.c | 32 ++++ src/bin/pg_dump/pg_dump.c | 17 ++- src/bin/pg_dump/pg_dump.h | 1 + src/bin/psql/describe.c | 9 +- src/bin/psql/tab-complete.c | 4 +- src/include/catalog/pg_subscription.h | 3 + src/include/datatype/timestamp.h | 2 + src/include/utils/timestamp.h | 2 + src/test/regress/expected/subscription.out | 165 ++++++++++++--------- src/test/regress/sql/subscription.sql | 20 +++ src/test/subscription/t/032_apply_delay.pl | 129 ++++++++++++++++ 18 files changed, 526 insertions(+), 83 deletions(-) create mode 100644 src/test/subscription/t/032_apply_delay.pl diff --git a/doc/src/sgml/catalogs.sgml b/doc/src/sgml/catalogs.sgml index cd2cc37aeb..291ebdafad 100644 --- a/doc/src/sgml/catalogs.sgml +++ b/doc/src/sgml/catalogs.sgml @@ -7833,6 +7833,16 @@ SCRAM-SHA-256$<replaceable><iteration count></replaceable>:<replaceable>&l </para></entry> </row> + <row> + <entry role="catalog_table_entry"><para role="column_definition"> + <structfield>subapplydelay</structfield> <type>int8</type> + </para> + <para> + Application delay of changes by a specified amount of time. The + unit is in milliseconds. + </para></entry> + </row> + <row> <entry role="catalog_table_entry"><para role="column_definition"> <structfield>subname</structfield> <type>name</type> diff --git a/doc/src/sgml/ref/alter_subscription.sgml b/doc/src/sgml/ref/alter_subscription.sgml index 64efc21f53..8901e1361c 100644 --- a/doc/src/sgml/ref/alter_subscription.sgml +++ b/doc/src/sgml/ref/alter_subscription.sgml @@ -208,8 +208,9 @@ ALTER SUBSCRIPTION <replaceable class="parameter">name</replaceable> RENAME TO < are <literal>slot_name</literal>, <literal>synchronous_commit</literal>, <literal>binary</literal>, <literal>streaming</literal>, - <literal>disable_on_error</literal>, and - <literal>origin</literal>. + <literal>disable_on_error</literal>, + <literal>origin</literal>, and + <literal>min_apply_delay</literal>. </para> </listitem> </varlistentry> diff --git a/doc/src/sgml/ref/create_subscription.sgml b/doc/src/sgml/ref/create_subscription.sgml index 7390c715bc..a794c07042 100644 --- a/doc/src/sgml/ref/create_subscription.sgml +++ b/doc/src/sgml/ref/create_subscription.sgml @@ -317,7 +317,36 @@ CREATE SUBSCRIPTION <replaceable class="parameter">subscription_name</replaceabl </para> </listitem> </varlistentry> - </variablelist></para> + + <varlistentry> + <term><literal>min_apply_delay</literal> (<type>integer</type>)</term> + <listitem> + <para> + By default, subscriber applies changes as soon as possible. As with + the physical replication feature + (<xref linkend="guc-recovery-min-apply-delay"/>), it can be useful to + have a time-delayed logical replica. This parameter allows you to + delay the application of changes by a specified amount of time. If + this value is specified without units, it is taken as milliseconds. + The default is zero, adding no delay. + </para> + <para> + The delay occurs only on WAL records for transaction begins and after + the initial table synchronization. It is possible that the + replication delay between publisher and subscriber exceeds the value + of this parameter, in which case no delay is added. Note that the + delay is calculated between the WAL time stamp as written on + publisher and the current time on the subscriber. Time spent in logical + decoding and in transfering the transaction may reduce the actual wait + time. If the system clocks on publisher and subscriber are not + synchronized, this may lead to apply changes earlier than expected. + This is not a major issue because a typical setting of this parameter + are much larger than typical time deviations between servers. + </para> + </listitem> + </varlistentry> + </variablelist> + </para> </listitem> </varlistentry> @@ -413,6 +442,18 @@ CREATE SUBSCRIPTION mysub PUBLICATION insert_only WITH (enabled = false); </programlisting></para> + + <para> + Create a subscription to a remote server that replicates tables in + the <literal>baz</literal> publication and starts replicating immediately on + commit. Pre-existing data is not copied. The application of changes is + delayed by 4 hours. +<programlisting> +CREATE SUBSCRIPTION foo + CONNECTION 'host=192.168.1.50 port=5432 user=foo dbname=foodb' + PUBLICATION baz + WITH (copy_data = false, min_apply_delay = '4h'); +</programlisting></para> </refsect1> <refsect1> diff --git a/src/backend/catalog/pg_subscription.c b/src/backend/catalog/pg_subscription.c index a506fc3ec8..d93e374ef4 100644 --- a/src/backend/catalog/pg_subscription.c +++ b/src/backend/catalog/pg_subscription.c @@ -64,6 +64,7 @@ GetSubscription(Oid subid, bool missing_ok) sub->oid = subid; sub->dbid = subform->subdbid; sub->skiplsn = subform->subskiplsn; + sub->applydelay = subform->subapplydelay; sub->name = pstrdup(NameStr(subform->subname)); sub->owner = subform->subowner; sub->enabled = subform->subenabled; diff --git a/src/backend/catalog/system_views.sql b/src/backend/catalog/system_views.sql index f369b1fc14..50175323b9 100644 --- a/src/backend/catalog/system_views.sql +++ b/src/backend/catalog/system_views.sql @@ -1297,9 +1297,10 @@ REVOKE ALL ON pg_replication_origin_status FROM public; -- All columns of pg_subscription except subconninfo are publicly readable. REVOKE ALL ON pg_subscription FROM public; -GRANT SELECT (oid, subdbid, subskiplsn, subname, subowner, subenabled, - subbinary, substream, subtwophasestate, subdisableonerr, - subslotname, subsynccommit, subpublications, suborigin) +GRANT SELECT (oid, subdbid, subskiplsn, subapplydelay, subname, subowner, + subenabled, subbinary, substream, subtwophasestate, + subdisableonerr, subslotname, subsynccommit, subpublications, + suborigin) ON pg_subscription TO public; CREATE VIEW pg_stat_subscription_stats AS diff --git a/src/backend/commands/subscriptioncmds.c b/src/backend/commands/subscriptioncmds.c index f73dfb6067..3c0d186991 100644 --- a/src/backend/commands/subscriptioncmds.c +++ b/src/backend/commands/subscriptioncmds.c @@ -47,6 +47,7 @@ #include "utils/memutils.h" #include "utils/pg_lsn.h" #include "utils/syscache.h" +#include "utils/timestamp.h" /* * Options that can be specified by the user in CREATE/ALTER SUBSCRIPTION @@ -65,6 +66,7 @@ #define SUBOPT_DISABLE_ON_ERR 0x00000400 #define SUBOPT_LSN 0x00000800 #define SUBOPT_ORIGIN 0x00001000 +#define SUBOPT_MIN_APPLY_DELAY 0x00002000 /* check if the 'val' has 'bits' set */ #define IsSet(val, bits) (((val) & (bits)) == (bits)) @@ -89,6 +91,7 @@ typedef struct SubOpts bool disableonerr; char *origin; XLogRecPtr lsn; + int64 min_apply_delay; } SubOpts; static List *fetch_table_list(WalReceiverConn *wrconn, List *publications); @@ -141,6 +144,8 @@ parse_subscription_options(ParseState *pstate, List *stmt_options, opts->disableonerr = false; if (IsSet(supported_opts, SUBOPT_ORIGIN)) opts->origin = pstrdup(LOGICALREP_ORIGIN_ANY); + if (IsSet(supported_opts, SUBOPT_MIN_APPLY_DELAY)) + opts->min_apply_delay = 0; /* Parse options */ foreach(lc, stmt_options) @@ -319,12 +324,45 @@ parse_subscription_options(ParseState *pstate, List *stmt_options, opts->specified_opts |= SUBOPT_LSN; opts->lsn = lsn; } + else if (IsSet(supported_opts, SUBOPT_MIN_APPLY_DELAY) && + strcmp(defel->defname, "min_apply_delay") == 0) + { + char *val, *tmp; + Interval *interval; + + if (IsSet(opts->specified_opts, SUBOPT_MIN_APPLY_DELAY)) + errorConflictingDefElem(defel, pstate); + + opts->specified_opts |= SUBOPT_MIN_APPLY_DELAY; + tmp = defGetString(defel); + + /* + * If there is no unit, interval_in takes second as unit. This + * parameter expects millisecond as unit so add a unit (ms) if + * there isn't one. + */ + if (strspn(tmp, "0123456789") == strlen(tmp)) + val = psprintf("%sms", tmp); + else + val = tmp; + + interval = DatumGetIntervalP(DirectFunctionCall3(interval_in, + CStringGetDatum(val), + ObjectIdGetDatum(InvalidOid), + Int32GetDatum(-1))); + opts->min_apply_delay = interval_to_ms(interval); + } else ereport(ERROR, (errcode(ERRCODE_SYNTAX_ERROR), errmsg("unrecognized subscription parameter: \"%s\"", defel->defname))); } + if (opts->min_apply_delay < 0 && IsSet(supported_opts, SUBOPT_MIN_APPLY_DELAY)) + ereport(ERROR, + errcode(ERRCODE_NUMERIC_VALUE_OUT_OF_RANGE), + errmsg("option \"%s\" must not be negative", "min_apply_delay")); + /* * We've been explicitly asked to not connect, that requires some * additional processing. @@ -557,7 +595,8 @@ CreateSubscription(ParseState *pstate, CreateSubscriptionStmt *stmt, SUBOPT_SLOT_NAME | SUBOPT_COPY_DATA | SUBOPT_SYNCHRONOUS_COMMIT | SUBOPT_BINARY | SUBOPT_STREAMING | SUBOPT_TWOPHASE_COMMIT | - SUBOPT_DISABLE_ON_ERR | SUBOPT_ORIGIN); + SUBOPT_DISABLE_ON_ERR | SUBOPT_ORIGIN | + SUBOPT_MIN_APPLY_DELAY); parse_subscription_options(pstate, stmt->options, supported_opts, &opts); /* @@ -622,6 +661,7 @@ CreateSubscription(ParseState *pstate, CreateSubscriptionStmt *stmt, values[Anum_pg_subscription_oid - 1] = ObjectIdGetDatum(subid); values[Anum_pg_subscription_subdbid - 1] = ObjectIdGetDatum(MyDatabaseId); values[Anum_pg_subscription_subskiplsn - 1] = LSNGetDatum(InvalidXLogRecPtr); + values[Anum_pg_subscription_subapplydelay - 1] = Int64GetDatum(opts.min_apply_delay); values[Anum_pg_subscription_subname - 1] = DirectFunctionCall1(namein, CStringGetDatum(stmt->subname)); values[Anum_pg_subscription_subowner - 1] = ObjectIdGetDatum(owner); @@ -1044,7 +1084,7 @@ AlterSubscription(ParseState *pstate, AlterSubscriptionStmt *stmt, supported_opts = (SUBOPT_SLOT_NAME | SUBOPT_SYNCHRONOUS_COMMIT | SUBOPT_BINARY | SUBOPT_STREAMING | SUBOPT_DISABLE_ON_ERR | - SUBOPT_ORIGIN); + SUBOPT_ORIGIN | SUBOPT_MIN_APPLY_DELAY); parse_subscription_options(pstate, stmt->options, supported_opts, &opts); @@ -1101,6 +1141,13 @@ AlterSubscription(ParseState *pstate, AlterSubscriptionStmt *stmt, = true; } + if (IsSet(opts.specified_opts, SUBOPT_MIN_APPLY_DELAY)) + { + values[Anum_pg_subscription_subapplydelay - 1] = + Int64GetDatum(opts.min_apply_delay); + replaces[Anum_pg_subscription_subapplydelay - 1] = true; + } + if (IsSet(opts.specified_opts, SUBOPT_ORIGIN)) { values[Anum_pg_subscription_suborigin - 1] = @@ -1130,6 +1177,14 @@ AlterSubscription(ParseState *pstate, AlterSubscriptionStmt *stmt, if (opts.enabled) ApplyLauncherWakeupAtCommit(); + /* + * If this subscription has been disabled and it has an apply + * delay set, wake up the logical replication worker to finish + * it as soon as possible. + */ + if (!opts.enabled && sub->applydelay > 0) + logicalrep_worker_wakeup(sub->oid, InvalidOid); + update_tuple = true; break; } diff --git a/src/backend/replication/logical/worker.c b/src/backend/replication/logical/worker.c index 5f8c541763..18aece3495 100644 --- a/src/backend/replication/logical/worker.c +++ b/src/backend/replication/logical/worker.c @@ -324,6 +324,8 @@ static void maybe_reread_subscription(void); static void DisableSubscriptionAndExit(void); +static void apply_delay(TimestampTz ts); + /* prototype needed because of stream_commit */ static void apply_dispatch(StringInfo s); @@ -803,6 +805,72 @@ slot_modify_data(TupleTableSlot *slot, TupleTableSlot *srcslot, ExecStoreVirtualTuple(slot); } +/* + * When min_apply_delay parameter is set on subscriber, we wait long enough to + * make sure a transaction is applied at least that interval behind the + * publisher. + * + * It applies the delay for the next transaction but before starting the + * transaction. The main reason for this design is to avoid a long-running + * transaction (which can cause some operational challenges) if the user sets a + * high value for the delay. This design is different from the physical + * replication (that applies the delay at commit time) mainly because write + * operations may allow some issues (such as bloat and locks) that can be + * minimized if it does not keep the transaction open for such a long time. + * + * The min_apply_delay parameter will take effect only after all tables are in + * READY state. + */ +static void +apply_delay(TimestampTz ts) +{ + TimestampTz delay_until = 0; + + /* nothing to do if no delay set */ + if (MySubscription->applydelay <= 0) + return; + + /* + * Apply delay only after all tablesync workers have reached READY state. A + * tablesync worker are kept until it reaches READY state. If we allow the + * delay during the catchup phase, once we reach the limit of tablesync + * workers, it will impose a delay for each subsequent worker. It means it + * will take a long time to finish the initial table synchronization. + * Instead, the apply delay will be activated only after all tables are in + * READY state. + */ + if (!AllTablesyncsReady()) + return; + + /* set apply delay */ + delay_until = TimestampTzPlusMilliseconds(TimestampTzGetDatum(ts), + MySubscription->applydelay); + + while (true) + { + long diffms; + + diffms = TimestampDifferenceMilliseconds(GetCurrentTimestamp(), delay_until); + + /* + * Exit without arming the latch if it's already past time to apply + * this transaction. + */ + if (diffms <= 0) + break; + + elog(DEBUG2, "logical replication apply delay: %ld ms", diffms); + + WaitLatch(MyLatch, + WL_LATCH_SET | WL_TIMEOUT | WL_EXIT_ON_PM_DEATH, + diffms, + WAIT_EVENT_RECOVERY_APPLY_DELAY); + ResetLatch(MyLatch); + + CHECK_FOR_INTERRUPTS(); + } +} + /* * Handle BEGIN message. */ @@ -814,6 +882,9 @@ apply_handle_begin(StringInfo s) logicalrep_read_begin(s, &begin_data); set_apply_error_context_xact(begin_data.xid, begin_data.final_lsn); + /* Should we delay the current transaction? */ + apply_delay(begin_data.committime); + remote_final_lsn = begin_data.final_lsn; maybe_start_skipping_changes(begin_data.final_lsn); @@ -868,6 +939,9 @@ apply_handle_begin_prepare(StringInfo s) logicalrep_read_begin_prepare(s, &begin_data); set_apply_error_context_xact(begin_data.xid, begin_data.prepare_lsn); + /* Should we delay the current prepared transaction? */ + apply_delay(begin_data.prepare_time); + remote_final_lsn = begin_data.prepare_lsn; maybe_start_skipping_changes(begin_data.prepare_lsn); @@ -1090,6 +1164,19 @@ apply_handle_stream_prepare(StringInfo s) elog(DEBUG1, "received prepare for streamed transaction %u", prepare_data.xid); + /* + * Should we delay the current prepared transaction? + * + * Although the delay is applied in BEGIN PREPARE messages, streamed + * prepared transactions apply the delay in a STREAM PREPARE message. + * That's ok because no changes have been applied yet + * (apply_spooled_messages() will do it). + * The STREAM START message does not contain a prepare time (it will be + * available when the in-progress prepared transaction finishes), hence, it + * was not possible to apply a delay at that time. + */ + apply_delay(prepare_data.prepare_time); + /* Replay all the spooled operations. */ apply_spooled_messages(prepare_data.xid, prepare_data.prepare_lsn); @@ -1481,6 +1568,19 @@ apply_handle_stream_commit(StringInfo s) elog(DEBUG1, "received commit for streamed transaction %u", xid); + /* + * Should we delay the current transaction? + * + * Although the delay is applied in BEGIN messages, streamed transactions + * apply the delay in a STREAM COMMIT message. That's ok because no changes + * have been applied yet (apply_spooled_messages() will do it). + * The STREAM START message would be a natural choice for this delay but + * there is no commit time yet (it will be available when the in-progress + * transaction finishes), hence, it was not possible to apply a delay at + * that time. + */ + apply_delay(commit_data.committime); + apply_spooled_messages(xid, commit_data.commit_lsn); apply_handle_commit_internal(&commit_data); diff --git a/src/backend/utils/adt/timestamp.c b/src/backend/utils/adt/timestamp.c index 49cdb290ac..89f57f7c33 100644 --- a/src/backend/utils/adt/timestamp.c +++ b/src/backend/utils/adt/timestamp.c @@ -2411,6 +2411,38 @@ interval_cmp_internal(const Interval *interval1, const Interval *interval2) return int128_compare(span1, span2); } +/* + * Given an Interval returns the number of milliseconds. + */ +int64 +interval_to_ms(const Interval *interval) +{ + int64 days; + int64 ms; + int64 result; + + days = interval->month * INT64CONST(30); + days += interval->day; + + /* + * The following operations use these special functions to detect overflow. + * Number of ms per informed days. + */ + if (pg_mul_s64_overflow(days, MSECS_PER_DAY, &result)) + ereport(ERROR, + (errcode(ERRCODE_NUMERIC_VALUE_OUT_OF_RANGE), + errmsg("bigint out of range"))); + + /* adds portion time (in ms) to the previous result. */ + ms = interval->time / INT64CONST(1000); + if (pg_add_s64_overflow(result, ms, &result)) + ereport(ERROR, + (errcode(ERRCODE_NUMERIC_VALUE_OUT_OF_RANGE), + errmsg("bigint out of range"))); + + return result; +} + Datum interval_eq(PG_FUNCTION_ARGS) { diff --git a/src/bin/pg_dump/pg_dump.c b/src/bin/pg_dump/pg_dump.c index da6605175a..5ef61f3de1 100644 --- a/src/bin/pg_dump/pg_dump.c +++ b/src/bin/pg_dump/pg_dump.c @@ -4441,6 +4441,7 @@ getSubscriptions(Archive *fout) int i_subsynccommit; int i_subpublications; int i_subbinary; + int i_subapplydelay; int i, ntups; @@ -4493,9 +4494,15 @@ getSubscriptions(Archive *fout) LOGICALREP_TWOPHASE_STATE_DISABLED); if (fout->remoteVersion >= 160000) - appendPQExpBufferStr(query, " s.suborigin\n"); + { + appendPQExpBufferStr(query, " s.suborigin,\n"); + appendPQExpBufferStr(query, " s.subapplydelay\n"); + } else - appendPQExpBuffer(query, " '%s' AS suborigin\n", LOGICALREP_ORIGIN_ANY); + { + appendPQExpBuffer(query, " '%s' AS suborigin,\n", LOGICALREP_ORIGIN_ANY); + appendPQExpBufferStr(query, " 0 AS subapplydelay\n"); + } appendPQExpBufferStr(query, "FROM pg_subscription s\n" @@ -4523,6 +4530,7 @@ getSubscriptions(Archive *fout) i_subtwophasestate = PQfnumber(res, "subtwophasestate"); i_subdisableonerr = PQfnumber(res, "subdisableonerr"); i_suborigin = PQfnumber(res, "suborigin"); + i_subapplydelay = PQfnumber(res, "subapplydelay"); subinfo = pg_malloc(ntups * sizeof(SubscriptionInfo)); @@ -4553,6 +4561,8 @@ getSubscriptions(Archive *fout) subinfo[i].subdisableonerr = pg_strdup(PQgetvalue(res, i, i_subdisableonerr)); subinfo[i].suborigin = pg_strdup(PQgetvalue(res, i, i_suborigin)); + subinfo[i].subapplydelay = + strtoi64(PQgetvalue(res, i, i_subapplydelay), NULL, 10); /* Decide whether we want to dump it */ selectDumpableObject(&(subinfo[i].dobj), fout); @@ -4632,6 +4642,9 @@ dumpSubscription(Archive *fout, const SubscriptionInfo *subinfo) if (strcmp(subinfo->subsynccommit, "off") != 0) appendPQExpBuffer(query, ", synchronous_commit = %s", fmtId(subinfo->subsynccommit)); + if (subinfo->subapplydelay > 0) + appendPQExpBuffer(query, ", min_apply_delay = '" INT64_FORMAT " ms'", subinfo->subapplydelay); + appendPQExpBufferStr(query, ");\n"); if (subinfo->dobj.dump & DUMP_COMPONENT_DEFINITION) diff --git a/src/bin/pg_dump/pg_dump.h b/src/bin/pg_dump/pg_dump.h index 69ee939d44..91b73e10d2 100644 --- a/src/bin/pg_dump/pg_dump.h +++ b/src/bin/pg_dump/pg_dump.h @@ -661,6 +661,7 @@ typedef struct _SubscriptionInfo char *subdisableonerr; char *suborigin; char *subsynccommit; + int64 subapplydelay; char *subpublications; } SubscriptionInfo; diff --git a/src/bin/psql/describe.c b/src/bin/psql/describe.c index 327a69487b..0be1d44e81 100644 --- a/src/bin/psql/describe.c +++ b/src/bin/psql/describe.c @@ -6469,7 +6469,7 @@ describeSubscriptions(const char *pattern, bool verbose) PGresult *res; printQueryOpt myopt = pset.popt; static const bool translate_columns[] = {false, false, false, false, - false, false, false, false, false, false, false, false}; + false, false, false, false, false, false, false, false, false}; if (pset.sversion < 100000) { @@ -6511,10 +6511,13 @@ describeSubscriptions(const char *pattern, bool verbose) gettext_noop("Two-phase commit"), gettext_noop("Disable on error")); + /* origin and min_apply_delay are only supported in v16 and higher */ if (pset.sversion >= 160000) appendPQExpBuffer(&buf, - ", suborigin AS \"%s\"\n", - gettext_noop("Origin")); + ", suborigin AS \"%s\"\n" + ", subapplydelay AS \"%s\"\n", + gettext_noop("Origin"), + gettext_noop("Apply delay")); appendPQExpBuffer(&buf, ", subsynccommit AS \"%s\"\n" diff --git a/src/bin/psql/tab-complete.c b/src/bin/psql/tab-complete.c index f265e043e9..d577abfc29 100644 --- a/src/bin/psql/tab-complete.c +++ b/src/bin/psql/tab-complete.c @@ -1873,7 +1873,7 @@ psql_completion(const char *text, int start, int end) COMPLETE_WITH("(", "PUBLICATION"); /* ALTER SUBSCRIPTION <name> SET ( */ else if (HeadMatches("ALTER", "SUBSCRIPTION", MatchAny) && TailMatches("SET", "(")) - COMPLETE_WITH("binary", "disable_on_error", "origin", "slot_name", + COMPLETE_WITH("binary", "disable_on_error", "min_apply_delay", "origin", "slot_name", "streaming", "synchronous_commit"); /* ALTER SUBSCRIPTION <name> SKIP ( */ else if (HeadMatches("ALTER", "SUBSCRIPTION", MatchAny) && TailMatches("SKIP", "(")) @@ -3153,7 +3153,7 @@ psql_completion(const char *text, int start, int end) /* Complete "CREATE SUBSCRIPTION <name> ... WITH ( <opt>" */ else if (HeadMatches("CREATE", "SUBSCRIPTION") && TailMatches("WITH", "(")) COMPLETE_WITH("binary", "connect", "copy_data", "create_slot", - "disable_on_error", "enabled", "origin", "slot_name", + "disable_on_error", "enabled", "min_apply_delay", "origin", "slot_name", "streaming", "synchronous_commit", "two_phase"); /* CREATE TRIGGER --- is allowed inside CREATE SCHEMA, so use TailMatches */ diff --git a/src/include/catalog/pg_subscription.h b/src/include/catalog/pg_subscription.h index 7b98714f30..3894b97aca 100644 --- a/src/include/catalog/pg_subscription.h +++ b/src/include/catalog/pg_subscription.h @@ -70,6 +70,8 @@ CATALOG(pg_subscription,6100,SubscriptionRelationId) BKI_SHARED_RELATION BKI_ROW XLogRecPtr subskiplsn; /* All changes finished at this LSN are * skipped */ + int64 subapplydelay; /* Replication apply delay */ + NameData subname; /* Name of the subscription */ Oid subowner BKI_LOOKUP(pg_authid); /* Owner of the subscription */ @@ -119,6 +121,7 @@ typedef struct Subscription * in */ XLogRecPtr skiplsn; /* All changes finished at this LSN are * skipped */ + int64 applydelay; /* Replication apply delay */ char *name; /* Name of the subscription */ Oid owner; /* Oid of the subscription owner */ bool enabled; /* Indicates if the subscription is enabled */ diff --git a/src/include/datatype/timestamp.h b/src/include/datatype/timestamp.h index d155f1b03b..d5bbfad1c4 100644 --- a/src/include/datatype/timestamp.h +++ b/src/include/datatype/timestamp.h @@ -127,6 +127,8 @@ struct pg_itm_in #define SECS_PER_MINUTE 60 #define MINS_PER_HOUR 60 +#define MSECS_PER_DAY INT64CONST(86400000) + #define USECS_PER_DAY INT64CONST(86400000000) #define USECS_PER_HOUR INT64CONST(3600000000) #define USECS_PER_MINUTE INT64CONST(60000000) diff --git a/src/include/utils/timestamp.h b/src/include/utils/timestamp.h index edf3a97318..91709035da 100644 --- a/src/include/utils/timestamp.h +++ b/src/include/utils/timestamp.h @@ -78,6 +78,8 @@ extern bool TimestampDifferenceExceeds(TimestampTz start_time, TimestampTz stop_time, int msec); +extern int64 interval_to_ms(const Interval *interval); + extern TimestampTz time_t_to_timestamptz(pg_time_t tm); extern pg_time_t timestamptz_to_time_t(TimestampTz t); diff --git a/src/test/regress/expected/subscription.out b/src/test/regress/expected/subscription.out index ef0ebf96b9..056b6e36f8 100644 --- a/src/test/regress/expected/subscription.out +++ b/src/test/regress/expected/subscription.out @@ -77,18 +77,18 @@ ERROR: unrecognized origin value: "foo" CREATE SUBSCRIPTION regress_testsub4 CONNECTION 'dbname=regress_doesnotexist' PUBLICATION testpub WITH (slot_name = NONE, connect = false, origin = none); WARNING: tables were not subscribed, you will have to run ALTER SUBSCRIPTION ... REFRESH PUBLICATION to subscribe the tables \dRs+ regress_testsub4 - List of subscriptions - Name | Owner | Enabled | Publication | Binary | Streaming | Two-phase commit | Disable on error | Origin | Synchronous commit | Conninfo | Skip LSN -------------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+--------------------+-----------------------------+---------- - regress_testsub4 | regress_subscription_user | f | {testpub} | f | f | d | f | none | off | dbname=regress_doesnotexist | 0/0 + List of subscriptions + Name | Owner | Enabled | Publication | Binary | Streaming | Two-phase commit | Disable on error | Origin | Apply delay | Synchronous commit | Conninfo | Skip LSN +------------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+-------------+--------------------+-----------------------------+---------- + regress_testsub4 | regress_subscription_user | f | {testpub} | f | f | d | f | none | 0 | off | dbname=regress_doesnotexist | 0/0 (1 row) ALTER SUBSCRIPTION regress_testsub4 SET (origin = any); \dRs+ regress_testsub4 - List of subscriptions - Name | Owner | Enabled | Publication | Binary | Streaming | Two-phase commit | Disable on error | Origin | Synchronous commit | Conninfo | Skip LSN -------------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+--------------------+-----------------------------+---------- - regress_testsub4 | regress_subscription_user | f | {testpub} | f | f | d | f | any | off | dbname=regress_doesnotexist | 0/0 + List of subscriptions + Name | Owner | Enabled | Publication | Binary | Streaming | Two-phase commit | Disable on error | Origin | Apply delay | Synchronous commit | Conninfo | Skip LSN +------------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+-------------+--------------------+-----------------------------+---------- + regress_testsub4 | regress_subscription_user | f | {testpub} | f | f | d | f | any | 0 | off | dbname=regress_doesnotexist | 0/0 (1 row) DROP SUBSCRIPTION regress_testsub3; @@ -98,10 +98,10 @@ ALTER SUBSCRIPTION regress_testsub CONNECTION 'foobar'; ERROR: invalid connection string syntax: missing "=" after "foobar" in connection info string \dRs+ - List of subscriptions - Name | Owner | Enabled | Publication | Binary | Streaming | Two-phase commit | Disable on error | Origin | Synchronous commit | Conninfo | Skip LSN ------------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+--------------------+-----------------------------+---------- - regress_testsub | regress_subscription_user | f | {testpub} | f | f | d | f | any | off | dbname=regress_doesnotexist | 0/0 + List of subscriptions + Name | Owner | Enabled | Publication | Binary | Streaming | Two-phase commit | Disable on error | Origin | Apply delay | Synchronous commit | Conninfo | Skip LSN +-----------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+-------------+--------------------+-----------------------------+---------- + regress_testsub | regress_subscription_user | f | {testpub} | f | f | d | f | any | 0 | off | dbname=regress_doesnotexist | 0/0 (1 row) ALTER SUBSCRIPTION regress_testsub SET PUBLICATION testpub2, testpub3 WITH (refresh = false); @@ -118,10 +118,10 @@ ERROR: unrecognized subscription parameter: "create_slot" -- ok ALTER SUBSCRIPTION regress_testsub SKIP (lsn = '0/12345'); \dRs+ - List of subscriptions - Name | Owner | Enabled | Publication | Binary | Streaming | Two-phase commit | Disable on error | Origin | Synchronous commit | Conninfo | Skip LSN ------------------+---------------------------+---------+---------------------+--------+-----------+------------------+------------------+--------+--------------------+------------------------------+---------- - regress_testsub | regress_subscription_user | f | {testpub2,testpub3} | f | f | d | f | any | off | dbname=regress_doesnotexist2 | 0/12345 + List of subscriptions + Name | Owner | Enabled | Publication | Binary | Streaming | Two-phase commit | Disable on error | Origin | Apply delay | Synchronous commit | Conninfo | Skip LSN +-----------------+---------------------------+---------+---------------------+--------+-----------+------------------+------------------+--------+-------------+--------------------+------------------------------+---------- + regress_testsub | regress_subscription_user | f | {testpub2,testpub3} | f | f | d | f | any | 0 | off | dbname=regress_doesnotexist2 | 0/12345 (1 row) -- ok - with lsn = NONE @@ -130,10 +130,10 @@ ALTER SUBSCRIPTION regress_testsub SKIP (lsn = NONE); ALTER SUBSCRIPTION regress_testsub SKIP (lsn = '0/0'); ERROR: invalid WAL location (LSN): 0/0 \dRs+ - List of subscriptions - Name | Owner | Enabled | Publication | Binary | Streaming | Two-phase commit | Disable on error | Origin | Synchronous commit | Conninfo | Skip LSN ------------------+---------------------------+---------+---------------------+--------+-----------+------------------+------------------+--------+--------------------+------------------------------+---------- - regress_testsub | regress_subscription_user | f | {testpub2,testpub3} | f | f | d | f | any | off | dbname=regress_doesnotexist2 | 0/0 + List of subscriptions + Name | Owner | Enabled | Publication | Binary | Streaming | Two-phase commit | Disable on error | Origin | Apply delay | Synchronous commit | Conninfo | Skip LSN +-----------------+---------------------------+---------+---------------------+--------+-----------+------------------+------------------+--------+-------------+--------------------+------------------------------+---------- + regress_testsub | regress_subscription_user | f | {testpub2,testpub3} | f | f | d | f | any | 0 | off | dbname=regress_doesnotexist2 | 0/0 (1 row) BEGIN; @@ -165,10 +165,10 @@ ALTER SUBSCRIPTION regress_testsub_foo SET (synchronous_commit = foobar); ERROR: invalid value for parameter "synchronous_commit": "foobar" HINT: Available values: local, remote_write, remote_apply, on, off. \dRs+ - List of subscriptions - Name | Owner | Enabled | Publication | Binary | Streaming | Two-phase commit | Disable on error | Origin | Synchronous commit | Conninfo | Skip LSN ----------------------+---------------------------+---------+---------------------+--------+-----------+------------------+------------------+--------+--------------------+------------------------------+---------- - regress_testsub_foo | regress_subscription_user | f | {testpub2,testpub3} | f | f | d | f | any | local | dbname=regress_doesnotexist2 | 0/0 + List of subscriptions + Name | Owner | Enabled | Publication | Binary | Streaming | Two-phase commit | Disable on error | Origin | Apply delay | Synchronous commit | Conninfo | Skip LSN +---------------------+---------------------------+---------+---------------------+--------+-----------+------------------+------------------+--------+-------------+--------------------+------------------------------+---------- + regress_testsub_foo | regress_subscription_user | f | {testpub2,testpub3} | f | f | d | f | any | 0 | local | dbname=regress_doesnotexist2 | 0/0 (1 row) -- rename back to keep the rest simple @@ -201,19 +201,19 @@ ERROR: binary requires a Boolean value CREATE SUBSCRIPTION regress_testsub CONNECTION 'dbname=regress_doesnotexist' PUBLICATION testpub WITH (connect = false, binary = true); WARNING: tables were not subscribed, you will have to run ALTER SUBSCRIPTION ... REFRESH PUBLICATION to subscribe the tables \dRs+ - List of subscriptions - Name | Owner | Enabled | Publication | Binary | Streaming | Two-phase commit | Disable on error | Origin | Synchronous commit | Conninfo | Skip LSN ------------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+--------------------+-----------------------------+---------- - regress_testsub | regress_subscription_user | f | {testpub} | t | f | d | f | any | off | dbname=regress_doesnotexist | 0/0 + List of subscriptions + Name | Owner | Enabled | Publication | Binary | Streaming | Two-phase commit | Disable on error | Origin | Apply delay | Synchronous commit | Conninfo | Skip LSN +-----------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+-------------+--------------------+-----------------------------+---------- + regress_testsub | regress_subscription_user | f | {testpub} | t | f | d | f | any | 0 | off | dbname=regress_doesnotexist | 0/0 (1 row) ALTER SUBSCRIPTION regress_testsub SET (binary = false); ALTER SUBSCRIPTION regress_testsub SET (slot_name = NONE); \dRs+ - List of subscriptions - Name | Owner | Enabled | Publication | Binary | Streaming | Two-phase commit | Disable on error | Origin | Synchronous commit | Conninfo | Skip LSN ------------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+--------------------+-----------------------------+---------- - regress_testsub | regress_subscription_user | f | {testpub} | f | f | d | f | any | off | dbname=regress_doesnotexist | 0/0 + List of subscriptions + Name | Owner | Enabled | Publication | Binary | Streaming | Two-phase commit | Disable on error | Origin | Apply delay | Synchronous commit | Conninfo | Skip LSN +-----------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+-------------+--------------------+-----------------------------+---------- + regress_testsub | regress_subscription_user | f | {testpub} | f | f | d | f | any | 0 | off | dbname=regress_doesnotexist | 0/0 (1 row) DROP SUBSCRIPTION regress_testsub; @@ -224,19 +224,19 @@ ERROR: streaming requires a Boolean value CREATE SUBSCRIPTION regress_testsub CONNECTION 'dbname=regress_doesnotexist' PUBLICATION testpub WITH (connect = false, streaming = true); WARNING: tables were not subscribed, you will have to run ALTER SUBSCRIPTION ... REFRESH PUBLICATION to subscribe the tables \dRs+ - List of subscriptions - Name | Owner | Enabled | Publication | Binary | Streaming | Two-phase commit | Disable on error | Origin | Synchronous commit | Conninfo | Skip LSN ------------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+--------------------+-----------------------------+---------- - regress_testsub | regress_subscription_user | f | {testpub} | f | t | d | f | any | off | dbname=regress_doesnotexist | 0/0 + List of subscriptions + Name | Owner | Enabled | Publication | Binary | Streaming | Two-phase commit | Disable on error | Origin | Apply delay | Synchronous commit | Conninfo | Skip LSN +-----------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+-------------+--------------------+-----------------------------+---------- + regress_testsub | regress_subscription_user | f | {testpub} | f | t | d | f | any | 0 | off | dbname=regress_doesnotexist | 0/0 (1 row) ALTER SUBSCRIPTION regress_testsub SET (streaming = false); ALTER SUBSCRIPTION regress_testsub SET (slot_name = NONE); \dRs+ - List of subscriptions - Name | Owner | Enabled | Publication | Binary | Streaming | Two-phase commit | Disable on error | Origin | Synchronous commit | Conninfo | Skip LSN ------------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+--------------------+-----------------------------+---------- - regress_testsub | regress_subscription_user | f | {testpub} | f | f | d | f | any | off | dbname=regress_doesnotexist | 0/0 + List of subscriptions + Name | Owner | Enabled | Publication | Binary | Streaming | Two-phase commit | Disable on error | Origin | Apply delay | Synchronous commit | Conninfo | Skip LSN +-----------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+-------------+--------------------+-----------------------------+---------- + regress_testsub | regress_subscription_user | f | {testpub} | f | f | d | f | any | 0 | off | dbname=regress_doesnotexist | 0/0 (1 row) -- fail - publication already exists @@ -251,10 +251,10 @@ ALTER SUBSCRIPTION regress_testsub ADD PUBLICATION testpub1, testpub2 WITH (refr ALTER SUBSCRIPTION regress_testsub ADD PUBLICATION testpub1, testpub2 WITH (refresh = false); ERROR: publication "testpub1" is already in subscription "regress_testsub" \dRs+ - List of subscriptions - Name | Owner | Enabled | Publication | Binary | Streaming | Two-phase commit | Disable on error | Origin | Synchronous commit | Conninfo | Skip LSN ------------------+---------------------------+---------+-----------------------------+--------+-----------+------------------+------------------+--------+--------------------+-----------------------------+---------- - regress_testsub | regress_subscription_user | f | {testpub,testpub1,testpub2} | f | f | d | f | any | off | dbname=regress_doesnotexist | 0/0 + List of subscriptions + Name | Owner | Enabled | Publication | Binary | Streaming | Two-phase commit | Disable on error | Origin | Apply delay | Synchronous commit | Conninfo | Skip LSN +-----------------+---------------------------+---------+-----------------------------+--------+-----------+------------------+------------------+--------+-------------+--------------------+-----------------------------+---------- + regress_testsub | regress_subscription_user | f | {testpub,testpub1,testpub2} | f | f | d | f | any | 0 | off | dbname=regress_doesnotexist | 0/0 (1 row) -- fail - publication used more then once @@ -269,10 +269,10 @@ ERROR: publication "testpub3" is not in subscription "regress_testsub" -- ok - delete publications ALTER SUBSCRIPTION regress_testsub DROP PUBLICATION testpub1, testpub2 WITH (refresh = false); \dRs+ - List of subscriptions - Name | Owner | Enabled | Publication | Binary | Streaming | Two-phase commit | Disable on error | Origin | Synchronous commit | Conninfo | Skip LSN ------------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+--------------------+-----------------------------+---------- - regress_testsub | regress_subscription_user | f | {testpub} | f | f | d | f | any | off | dbname=regress_doesnotexist | 0/0 + List of subscriptions + Name | Owner | Enabled | Publication | Binary | Streaming | Two-phase commit | Disable on error | Origin | Apply delay | Synchronous commit | Conninfo | Skip LSN +-----------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+-------------+--------------------+-----------------------------+---------- + regress_testsub | regress_subscription_user | f | {testpub} | f | f | d | f | any | 0 | off | dbname=regress_doesnotexist | 0/0 (1 row) DROP SUBSCRIPTION regress_testsub; @@ -306,10 +306,10 @@ ERROR: two_phase requires a Boolean value CREATE SUBSCRIPTION regress_testsub CONNECTION 'dbname=regress_doesnotexist' PUBLICATION testpub WITH (connect = false, two_phase = true); WARNING: tables were not subscribed, you will have to run ALTER SUBSCRIPTION ... REFRESH PUBLICATION to subscribe the tables \dRs+ - List of subscriptions - Name | Owner | Enabled | Publication | Binary | Streaming | Two-phase commit | Disable on error | Origin | Synchronous commit | Conninfo | Skip LSN ------------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+--------------------+-----------------------------+---------- - regress_testsub | regress_subscription_user | f | {testpub} | f | f | p | f | any | off | dbname=regress_doesnotexist | 0/0 + List of subscriptions + Name | Owner | Enabled | Publication | Binary | Streaming | Two-phase commit | Disable on error | Origin | Apply delay | Synchronous commit | Conninfo | Skip LSN +-----------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+-------------+--------------------+-----------------------------+---------- + regress_testsub | regress_subscription_user | f | {testpub} | f | f | p | f | any | 0 | off | dbname=regress_doesnotexist | 0/0 (1 row) --fail - alter of two_phase option not supported. @@ -318,10 +318,10 @@ ERROR: unrecognized subscription parameter: "two_phase" -- but can alter streaming when two_phase enabled ALTER SUBSCRIPTION regress_testsub SET (streaming = true); \dRs+ - List of subscriptions - Name | Owner | Enabled | Publication | Binary | Streaming | Two-phase commit | Disable on error | Origin | Synchronous commit | Conninfo | Skip LSN ------------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+--------------------+-----------------------------+---------- - regress_testsub | regress_subscription_user | f | {testpub} | f | t | p | f | any | off | dbname=regress_doesnotexist | 0/0 + List of subscriptions + Name | Owner | Enabled | Publication | Binary | Streaming | Two-phase commit | Disable on error | Origin | Apply delay | Synchronous commit | Conninfo | Skip LSN +-----------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+-------------+--------------------+-----------------------------+---------- + regress_testsub | regress_subscription_user | f | {testpub} | f | t | p | f | any | 0 | off | dbname=regress_doesnotexist | 0/0 (1 row) ALTER SUBSCRIPTION regress_testsub SET (slot_name = NONE); @@ -330,10 +330,10 @@ DROP SUBSCRIPTION regress_testsub; CREATE SUBSCRIPTION regress_testsub CONNECTION 'dbname=regress_doesnotexist' PUBLICATION testpub WITH (connect = false, streaming = true, two_phase = true); WARNING: tables were not subscribed, you will have to run ALTER SUBSCRIPTION ... REFRESH PUBLICATION to subscribe the tables \dRs+ - List of subscriptions - Name | Owner | Enabled | Publication | Binary | Streaming | Two-phase commit | Disable on error | Origin | Synchronous commit | Conninfo | Skip LSN ------------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+--------------------+-----------------------------+---------- - regress_testsub | regress_subscription_user | f | {testpub} | f | t | p | f | any | off | dbname=regress_doesnotexist | 0/0 + List of subscriptions + Name | Owner | Enabled | Publication | Binary | Streaming | Two-phase commit | Disable on error | Origin | Apply delay | Synchronous commit | Conninfo | Skip LSN +-----------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+-------------+--------------------+-----------------------------+---------- + regress_testsub | regress_subscription_user | f | {testpub} | f | t | p | f | any | 0 | off | dbname=regress_doesnotexist | 0/0 (1 row) ALTER SUBSCRIPTION regress_testsub SET (slot_name = NONE); @@ -345,18 +345,47 @@ ERROR: disable_on_error requires a Boolean value CREATE SUBSCRIPTION regress_testsub CONNECTION 'dbname=regress_doesnotexist' PUBLICATION testpub WITH (connect = false, disable_on_error = false); WARNING: tables were not subscribed, you will have to run ALTER SUBSCRIPTION ... REFRESH PUBLICATION to subscribe the tables \dRs+ - List of subscriptions - Name | Owner | Enabled | Publication | Binary | Streaming | Two-phase commit | Disable on error | Origin | Synchronous commit | Conninfo | Skip LSN ------------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+--------------------+-----------------------------+---------- - regress_testsub | regress_subscription_user | f | {testpub} | f | f | d | f | any | off | dbname=regress_doesnotexist | 0/0 + List of subscriptions + Name | Owner | Enabled | Publication | Binary | Streaming | Two-phase commit | Disable on error | Origin | Apply delay | Synchronous commit | Conninfo | Skip LSN +-----------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+-------------+--------------------+-----------------------------+---------- + regress_testsub | regress_subscription_user | f | {testpub} | f | f | d | f | any | 0 | off | dbname=regress_doesnotexist | 0/0 (1 row) ALTER SUBSCRIPTION regress_testsub SET (disable_on_error = true); \dRs+ - List of subscriptions - Name | Owner | Enabled | Publication | Binary | Streaming | Two-phase commit | Disable on error | Origin | Synchronous commit | Conninfo | Skip LSN ------------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+--------------------+-----------------------------+---------- - regress_testsub | regress_subscription_user | f | {testpub} | f | f | d | t | any | off | dbname=regress_doesnotexist | 0/0 + List of subscriptions + Name | Owner | Enabled | Publication | Binary | Streaming | Two-phase commit | Disable on error | Origin | Apply delay | Synchronous commit | Conninfo | Skip LSN +-----------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+-------------+--------------------+-----------------------------+---------- + regress_testsub | regress_subscription_user | f | {testpub} | f | f | d | t | any | 0 | off | dbname=regress_doesnotexist | 0/0 +(1 row) + +ALTER SUBSCRIPTION regress_testsub SET (slot_name = NONE); +DROP SUBSCRIPTION regress_testsub; +-- fail -- min_apply_delay must be a non-negative integer +CREATE SUBSCRIPTION regress_testsub CONNECTION 'dbname=regress_doesnotexist' PUBLICATION testpub WITH (connect = false, min_apply_delay = foo); +ERROR: invalid input syntax for type interval: "foo" +CREATE SUBSCRIPTION regress_testsub CONNECTION 'dbname=regress_doesnotexist' PUBLICATION testpub WITH (connect = false, min_apply_delay = -1); +ERROR: option "min_apply_delay" must not be negative +-- success -- 123 ms +CREATE SUBSCRIPTION regress_testsub CONNECTION 'dbname=regress_doesnotexist' PUBLICATION testpub WITH (connect = false, min_apply_delay = 123); +WARNING: tables were not subscribed, you will have to run ALTER SUBSCRIPTION ... REFRESH PUBLICATION to subscribe the tables +\dRs+ + List of subscriptions + Name | Owner | Enabled | Publication | Binary | Streaming | Two-phase commit | Disable on error | Origin | Apply delay | Synchronous commit | Conninfo | Skip LSN +-----------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+-------------+--------------------+-----------------------------+---------- + regress_testsub | regress_subscription_user | f | {testpub} | f | f | d | f | any | 123 | off | dbname=regress_doesnotexist | 0/0 +(1 row) + +ALTER SUBSCRIPTION regress_testsub SET (slot_name = NONE); +DROP SUBSCRIPTION regress_testsub; +-- success -- interval is converted into ms and stored as integer +CREATE SUBSCRIPTION regress_testsub CONNECTION 'dbname=regress_doesnotexist' PUBLICATION testpub WITH (connect = false, min_apply_delay = '4h 27min 35s'); +WARNING: tables were not subscribed, you will have to run ALTER SUBSCRIPTION ... REFRESH PUBLICATION to subscribe the tables +\dRs+ + List of subscriptions + Name | Owner | Enabled | Publication | Binary | Streaming | Two-phase commit | Disable on error | Origin | Apply delay | Synchronous commit | Conninfo | Skip LSN +-----------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+-------------+--------------------+-----------------------------+---------- + regress_testsub | regress_subscription_user | f | {testpub} | f | f | d | f | any | 16055000 | off | dbname=regress_doesnotexist | 0/0 (1 row) ALTER SUBSCRIPTION regress_testsub SET (slot_name = NONE); diff --git a/src/test/regress/sql/subscription.sql b/src/test/regress/sql/subscription.sql index 4425fafc46..885f8bb6fa 100644 --- a/src/test/regress/sql/subscription.sql +++ b/src/test/regress/sql/subscription.sql @@ -264,6 +264,26 @@ ALTER SUBSCRIPTION regress_testsub SET (disable_on_error = true); ALTER SUBSCRIPTION regress_testsub SET (slot_name = NONE); DROP SUBSCRIPTION regress_testsub; +-- fail -- min_apply_delay must be a non-negative integer +CREATE SUBSCRIPTION regress_testsub CONNECTION 'dbname=regress_doesnotexist' PUBLICATION testpub WITH (connect = false, min_apply_delay = foo); +CREATE SUBSCRIPTION regress_testsub CONNECTION 'dbname=regress_doesnotexist' PUBLICATION testpub WITH (connect = false, min_apply_delay = -1); + +-- success -- 123 ms +CREATE SUBSCRIPTION regress_testsub CONNECTION 'dbname=regress_doesnotexist' PUBLICATION testpub WITH (connect = false, min_apply_delay = 123); + +\dRs+ + +ALTER SUBSCRIPTION regress_testsub SET (slot_name = NONE); +DROP SUBSCRIPTION regress_testsub; + +-- success -- interval is converted into ms and stored as integer +CREATE SUBSCRIPTION regress_testsub CONNECTION 'dbname=regress_doesnotexist' PUBLICATION testpub WITH (connect = false, min_apply_delay = '4h 27min 35s'); + +\dRs+ + +ALTER SUBSCRIPTION regress_testsub SET (slot_name = NONE); +DROP SUBSCRIPTION regress_testsub; + RESET SESSION AUTHORIZATION; DROP ROLE regress_subscription_user; DROP ROLE regress_subscription_user2; diff --git a/src/test/subscription/t/032_apply_delay.pl b/src/test/subscription/t/032_apply_delay.pl new file mode 100644 index 0000000000..3d9e0b05f9 --- /dev/null +++ b/src/test/subscription/t/032_apply_delay.pl @@ -0,0 +1,129 @@ + +# Copyright (c) 2022, PostgreSQL Global Development Group + +# Test replication apply delay +use strict; +use warnings; +use PostgreSQL::Test::Cluster; +use PostgreSQL::Test::Utils; +use Test::More; + +# Create publisher node. +my $node_publisher = PostgreSQL::Test::Cluster->new('publisher'); +$node_publisher->init(allows_streaming => 'logical'); +$node_publisher->append_conf('postgresql.conf', + 'logical_decoding_work_mem = 64kB'); +$node_publisher->start; + +# Create subscriber node. +my $node_subscriber = PostgreSQL::Test::Cluster->new('subscriber'); +$node_subscriber->init; +$node_subscriber->append_conf('postgresql.conf', + "log_min_messages = debug2"); +$node_subscriber->start; + +# Create some preexisting content on publisher. +$node_publisher->safe_psql('postgres', + "CREATE TABLE test_tab (a int primary key, b varchar)"); +$node_publisher->safe_psql('postgres', + "INSERT INTO test_tab VALUES (1, 'foo'), (2, 'bar')"); + +# Setup structure on subscriber. +$node_subscriber->safe_psql('postgres', + "CREATE TABLE test_tab (a int primary key, b text, c timestamptz DEFAULT now(), d bigint DEFAULT 999)" +); + +# Setup logical replication. +my $publisher_connstr = $node_publisher->connstr . ' dbname=postgres'; +$node_publisher->safe_psql('postgres', + "CREATE PUBLICATION tap_pub FOR TABLE test_tab"); + +my $appname = 'tap_sub'; +$node_subscriber->safe_psql('postgres', + "CREATE SUBSCRIPTION tap_sub CONNECTION '$publisher_connstr application_name=$appname' PUBLICATION tap_pub WITH (streaming = on, min_apply_delay = '2s')" +); + +# Wait for initial table sync to finish. +$node_subscriber->wait_for_subscription_sync($node_publisher, $appname); + +# Check log starting now for logical replication apply delay. +my $log_location = -s $node_subscriber->logfile; + +my $result = + $node_subscriber->safe_psql('postgres', + "SELECT count(*), min(a), max(a) FROM test_tab"); +is($result, qq(2|1|2), 'check initial data was copied to subscriber'); + +# New row to trigger apply delay. +$node_publisher->safe_psql('postgres', + "INSERT INTO test_tab VALUES (3, 'baz')"); +$node_publisher->safe_psql('postgres', + "INSERT INTO test_tab VALUES (4, 'abc')"); +$node_publisher->safe_psql('postgres', + "INSERT INTO test_tab VALUES (5, 'def')"); + +$node_publisher->wait_for_catchup($appname); + +$result = + $node_subscriber->safe_psql('postgres', + "SELECT count(*), min(a), max(a) FROM test_tab"); +is($result, qq(5|1|5), 'check if the new rows were applied to subscriber'); + +check_apply_delay_log("logical replication apply delay"); + +# Test streamed transaction. +# Insert, update and delete enough rows to exceed 64kB limit. +$node_publisher->safe_psql( + 'postgres', q{ +BEGIN; +INSERT INTO test_tab SELECT i, md5(i::text) FROM generate_series(6, 5000) s(i); +UPDATE test_tab SET b = md5(b) WHERE mod(a, 2) = 0; +DELETE FROM test_tab WHERE mod(a, 3) = 0; +COMMIT; +}); + +$node_publisher->wait_for_catchup($appname); + +$result = + $node_subscriber->safe_psql('postgres', + "SELECT count(*), min(a), max(a) FROM test_tab"); +is($result, qq(3334|1|5000), 'check if the new rows were applied to subscriber'); + +check_apply_delay_log("logical replication apply delay"); + +# Test ALTER SUBSCRIPTION. Delay 86460 seconds (1 day 1 minute). +$node_subscriber->safe_psql('postgres', + "ALTER SUBSCRIPTION tap_sub SET (min_apply_delay = 86460000)" +); + +# New row to trigger apply delay. +$node_publisher->safe_psql('postgres', + "INSERT INTO test_tab VALUES (0, 'foobar')"); + +# Disable subscription. worker should die immediately. +$node_subscriber->safe_psql('postgres', + "ALTER SUBSCRIPTION tap_sub DISABLE" +); + +# Wait until worker dies. +my $sub_query = + "SELECT count(1) = 0 FROM pg_stat_subscription WHERE subname = 'tap_sub' AND pid IS NOT NULL;"; +$node_subscriber->poll_query_until('postgres', $sub_query) + or die "Timed out while waiting for subscriber to die"; + +$node_subscriber->stop; +$node_publisher->stop; + +done_testing(); + +sub check_apply_delay_log +{ + my $message = shift; + my $old_log_location = $log_location; + + $log_location = $node_subscriber->wait_for_log(qr/$message/, $log_location); + + cmp_ok($log_location, '>', $old_log_location, + "logfile contains triggered logical replication apply delay" + ); +} -- 2.30.2
