On Apr 28, 2006, at 11:37 AM, Erik Myllymaki wrote:
When I had this installed on a single SATA drive running from the
PE1800's on-board SATA interface, this operation took anywhere from
65-80 seconds.
With my new RAID card and drives, this operation took 272 seconds!?
switch it to RAID10 and re-try your experiment. if that is fast,
then you know your raid controller does bad RAID5.
anyhow, I have in one server (our office mail server and part-time
development testing box) an adaptec SATA RAID from dell. it is
configured for RAID5 and does well for normal office stuff, but when
we do postgres tests on it, it just is plain old awful.
but I have some LSI based cards on which RAID5 is plenty fast and
suitable for the DB, but those are SCSI.
For what it is worth, the Dell PE1850 internal PERC4/Si card is
wicked fast when hooked up with a pair of U320 SCSI drives.
---------------------------(end of broadcast)---------------------------
TIP 3: Have you checked our extensive FAQ?
http://www.postgresql.org/docs/faq
