Thank U all,
I know some things to work on & after some work & study on them , I will
continue this discussion tomorrow .
Best Regards,
Adarsh
Raghavendra wrote:
Adarsh,
[root@s8-mysd-2 8.4SS]# iostat
-bash: iostat: command not found
/usr/bin/iostat
Our application runs by making connections to Postgres Server from
different servers and selecting data from one table & insert into
remaining tables in a database.
When you are doing bulk inserts you need to tune AUTOVACUUM parameters
or Change the autovacuum settings for those tables doing bulk INSERTs.
Insert's need analyze.
#autovacuum = on # Enable autovacuum
subprocess? 'on'
# requires track_counts to
also be on.
#log_autovacuum_min_duration = -1 # -1 disables, 0 logs all
actions and
# their durations, > 0 logs
only
# actions running at least
this number
# of milliseconds.
#autovacuum_max_workers = 3 # max number of autovacuum
subprocesses
#autovacuum_naptime = 1min # time between autovacuum runs
#autovacuum_vacuum_threshold = 50 # min number of row
updates before
# vacuum
#autovacuum_analyze_threshold = 50 # min number of row
updates before
# analyze
#autovacuum_vacuum_scale_factor = 0.2 # fraction of table size
before vacuum
#autovacuum_analyze_scale_factor = 0.1 # fraction of table size
before analyze
#autovacuum_freeze_max_age = 200000000 # maximum XID age before
forced vacuum
# (change requires restart)
#autovacuum_vacuum_cost_delay = 20ms # default vacuum cost
delay for
# autovacuum, in milliseconds;
# -1 means use
vacuum_cost_delay
#autovacuum_vacuum_cost_limit = -1 # default vacuum cost
limit for
# autovacuum, -1 means use
# vacuum_cost_limit
These are all default AUTOVACUUM settings. If you are using PG 8.4 or
above, try AUTOVACUUM settings on bulk insert tables for better
performance. Also need to tune the 'autovacuum_naptime'
Eg:-
ALTER table <table name> SET (autovacuum_vacuum_threshold=xxxxx,
autovacuum_analyze_threshold=xxxx);
wal_buffers //max is 16MB
checkpoint_segment /// Its very less in your setting
checkpoint_timeout
temp_buffer // If application is using temp tables
These parameter will also boost the performance.
Best Regards
Raghavendra
EnterpriseDB Corporation.
Scott Marlowe wrote:
On Mon, Apr 4, 2011 at 5:34 AM, Adarsh Sharma <adarsh.sha...@orkash.com>
<mailto:adarsh.sha...@orkash.com> wrote:
Mem: 16299476k total, 16198784k used, 100692k free, 73776k buffers
Swap: 16787884k total, 148176k used, 16639708k free, 15585396k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+
COMMAND
3401 postgres 20 0 4288m 3.3g 3.3g S 0 21.1 0:24.73
postgres
3397 postgres 20 0 4286m 119m 119m S 0 0.8 0:00.36
postgres
PLease help me to understand how much memory does 1 Connection Uses and how
to use Server parameters accordingly.
OK, first, see the 15585396k cached? That's how much memory your OS
is using to cache file systems etc. Basically that's memory not being
used by anything else right now, so the OS borrows it and uses it for
caching.
Next, VIRT is how much memory your process would need to load every
lib it might need but may not be using now, plus all the shared memory
it might need, plus it's own space etc. It's not memory in use, it's
memory that might under the worst circumstances, be used by that one
process. RES is the amount of memory the process IS actually
touching, including shared memory that other processes may be sharing.
Finally, SHR is the amount of shared memory the process is touching.
so, taking your biggest process, it is linked to enough libraries and
shared memory and it's own private memory to add up to 4288Meg. It is
currently actually touching 3.3G. Of that 3.3G it is touching 3.3G is
shared with other processes. So, the difference between RES and SHR
is 0, so the delta, or extra memory it's using besides shared memory
is ZERO (or very close to it, probably dozens or fewer of megabytes).
So, you're NOT running out of memory. Remember when I mentioned
iostat, vmstat, etc up above? Have you run any of those?
