On Thu, Nov 29, 2012 at 10:56 AM, John Lister <john.lis...@kickstone.com> wrote: > I must have misread the numbers before when using bonnie++, run it again and > getting 1.3Gb/s read and 700Mb/s write which looks more promising. In terms > of vmstat:
pretty nice. >> *) Very first thing we need to check is if we are storage bound (check i/o >> wait) and if so where the bind up is. Could be on the wal or heap volume. >> Another possibility is that we're lock bound which is a completely different >> issue to deal with. so we want to see top, iostat, vmstat, etc while test is >> happening. > > io_wait is typically <20% which is worse than for bonnie. > vmstat typical figures are during pgbench are > procs -----------memory---------- ---swap-- -----io---- -system-- > ----cpu---- > r b swpd free buff cache si so bi bo in cs us sy id > wa > 30 1 0 261900 44340 62650808 0 0 88348 74500 103544 175006 53 > 20 21 6 > > and iostat (sda is the wal device) > avg-cpu: %user %nice %system %iowait %steal %idle > 52.80 0.00 17.94 12.22 0.00 17.03 > > Device: tps kB_read/s kB_wrtn/s kB_read kB_wrtn > sda 2544.00 0.00 66432.00 0 132864 > sdc 4153.00 132848.00 136.00 265696 272 > > I noticed that the system values are usually in the 20% region, could this > be the locks? btw pgbench is running on the db server not a client - would > that influence things dramatically. Since we have some idle cpu% here we can probably eliminate pgbench as a bottleneck by messing around with the -j switch. another thing we want to test is the "-N" switch -- this doesn't update the tellers and branches table which in high concurrency situations can bind you from locking perspective. one thing that immediately jumps out here is that your wal volume could be holding you up. so it's possible we may want to move wal to the ssd volume. if you can scrounge up a 9.2 pgbench, we can gather more evidence for that by running pgbench with the "--unlogged-tables" option, which creates the tables unlogged so that they are not wal logged (for the record, this causes tables to be truncated when not shut down in clean state). putting all the options above together (history only, no wal, multi thread) and you're test is more approximating random device write performance. >> *) another interesting test to run is large scaling factor (ideally, at >> least 2x ram) read only test via pgbench -S. merlin > > Might give that a go when I next get a chance to run the tests... yeah -- this will tell us raw seek performance of ssd volume which presumably will be stupendous. 2x is minimum btw 10x would be more appropriate. since you're building a beast, other settings to explore are numa (http://frosty-postgres.blogspot.com/2012/08/postgresql-numa-and-zone-reclaim-mode.html) and dell memory bios settings that are occasionally set from the factory badly (see here: http://bleything.net/articles/postgresql-benchmarking-memory.html). merlin -- Sent via pgsql-performance mailing list (pgsql-performance@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-performance