Trilok Kumar wrote:
Hi All,
I have a table called
vehicle_duty_cycle_summary
vehicle_master_id | starting_odometer |
ending_odometer | login_time |
logout_time
-------------------+-------------------+-----------------+----------------------------+----------------------------
4 | 53379.00 | 53504.00 | 2006-12-19
16:19:16.584547 | 2006-12-20 07:12:57.716907
I would like to compute the following on this table.
Idle time of vehicel=(ending_odometer reading of the
previous day -
starting_odometer reading of the present day) for
every vehicle
I would think your naming may be confusing and may not be
implemented(recorded?) very well.
I think Idle Time is a misleading name by your explanation - Idle time
would be defined as (logout_time - previous login_time) which gives you
the time the vehicle was sitting in the garage.
What you want may be better called unmetered_travel and would be the
distance traveled between login_time and logout_time
This would simply be
select vehicle_master_id,
(ending_odometer - starting_odometer) as unmetered_travel
from vehicle_duty_cycle_summary;
Going by the naming you have used it would appear that you are recording
the time spent in the garage (going by the data you have shown I would
say this is a company car garage not a repair shop)
One record would appear to record the time the car is in the garage -
login_time would be the time the employee returned the car and
logout_time would be when the car next went out to someone.
I would think you want the opposite of that - the time and odometer
reading when an employee takes the car and the time and odometer of when
it is returned and the employee_id of who had it. This will give you who
used the car at what time and what distances they travelled (which of
course would be work related travel)
Going with those changes -
The distance traveled by an employee is easy to workout, if you wanted
to workout the unmetered (non-work) distance traveled you could try
something like (untested) -
select
v1.vehicle_master_id
, v1.starting_odometer -
(select v2.ending_odometer
from vehicle_duty_cycle_summary v2
where v2.vehicle_master_id = v1.vehicle_master_id
and v2.login_time < v1.logout_time
order by v2.login_time desc limit 1)
as unmetered_travel
from vehicle_duty_cycle_summary v1
where v1.vehicle_master_id = 4;
I would calculate idle time as -
select
v1.vehicle_master_id
, v1.logout_time -
(select v2.login_time
from vehicle_duty_cycle_summary v2
where v2.vehicle_master_id = v1.vehicle_master_id
and v2.login_time < v1.logout_time
order by v2.login_time desc limit 1)
as unmetered_travel
from vehicle_duty_cycle_summary v1
where v1.vehicle_master_id = 4;
If this isn't the way it should work you should be able to adapt the
query to match your definition of idle time.
--
Shane Ambler
pgSQL (at) Sheeky (dot) Biz
Get Sheeky @ http://Sheeky.Biz
---------------------------(end of broadcast)---------------------------
TIP 1: if posting/reading through Usenet, please send an appropriate
subscribe-nomail command to [EMAIL PROTECTED] so that your
message can get through to the mailing list cleanly
