Yep, I found that thread and tried all possible combinations: '/dev/ttyUSB0' '/dev//ttyUSB0' '/dev/ttyusb0' '/dev//ttyusb0' 'ttyUSB0' 'ttyusb0'
and none worked... :( 2013/7/17 Esteban Lorenzano <esteba...@gmail.com> > It is indeed annoying and obviously buggy. > I kinda "fixed" it last year but since I didn't had any serial port stuff > to test it, it was just in abstract (Luc was using it, thought) > > There was a report a couple of weeks ago to try using double slash. > > SerialPort new openPort: '/dev//ttyUSB0' > > > > Esteban > > On Jul 17, 2013, at 1:47 PM, Bernat Romagosa < > tibabenfortlapala...@gmail.com> wrote: > > So I compiled two VMs, one with the SerialPlugin as an internal plugin, > the other one as an external plugin. > > On a Debian box, I connect an Arduino Diecimila board and I get its > handler at /dev/ttyUSB0. However, on both VMs with fresh Pharo 2.0 images: > > SerialPort new openPort: '/dev/ttyUSB0' > > > Fails with a generic error. > > What's wrong with SerialPort? The "cannot open port" error message is > about as informative as "sorry, not gonna happen" :( > > > 2013/7/17 Bernat Romagosa <tibabenfortlapala...@gmail.com> > >> Great! I was missing the gl and alsa headers. All done now, thanks a lot >> :) >> >> >> 2013/7/17 Guillermo Polito <guillermopol...@gmail.com> >> >>> >>> On Wed, Jul 17, 2013 at 12:39 PM, Bernat Romagosa < >>> tibabenfortlapala...@gmail.com> wrote: >>> >>>> Okay, it seems the patch is already included in the latest VMMaker >>>> image, so no need to apply it. >>>> >>> >>> That's nice :). Anyone with grants in the issue tracker can close it?? :D >>> >>> >>>> >>>> Still, having executed the script, I get yet another error, this time >>>> related to gl.h (why does it need it? I left B3DAcceleratorPlugin out): >>>> >>>> [ 95%] Building C object >>>> CMakeFiles/CogVM.dir/home/bromagosa/blessed/platforms/unix/vm/sqUnixMain.c.o >>>> In file included from >>>> /home/bromagosa/blessed/platforms/unix/vm/SqDisplay.h:16:0, >>>> from >>>> /home/bromagosa/blessed/platforms/unix/vm/sqUnixMain.c:140: >>>> /home/bromagosa/blessed/platforms/unix/plugins/B3DAcceleratorPlugin/sqUnixOpenGL.h:21:22: >>>> fatal error: GL/gl.h: El fitxer o directori no existeix >>>> compilation terminated. >>>> make[2]: *** >>>> [CMakeFiles/CogVM.dir/home/bromagosa/blessed/platforms/unix/vm/sqUnixMain.c.o] >>>> Error 1 >>>> make[1]: *** [CMakeFiles/CogVM.dir/all] Error 2 >>>> make: *** [all] Error 2 >>>> >>>> >>> Hmm, which configuration are you using to copile? I think there is a >>> UnixNoGLConfiguration or something like that... So either you install the >>> gl libraries or use the no gl configuration to generate the sources :). >>> In any case, I really don't know why there is that dependency with >>> opengl... >>> >>> >>>> >>>> 2013/7/17 Bernat Romagosa <tibabenfortlapala...@gmail.com> >>>> >>>>> ouch! I forgot to execute the script this time, and didn't install the >>>>> patch either.. trying again, thanks! :) >>>>> >>>>> >>>>> 2013/7/17 Guillermo Polito <guillermopol...@gmail.com> >>>>> >>>>>> Hi! >>>>>> >>>>>> before compiling you have to, inside the build folder, execute >>>>>> codegen-scripts/extract-commit-info.sh >>>>>> >>>>>> Besides, I was looking at luc's tutorial and it lacks one step to >>>>>> have serial plugin built: install the patch he made [1]. Did you do >>>>>> that? I >>>>>> added a comment in the blog entry just in case... >>>>>> >>>>>> Guille >>>>>> >>>>>> [1] https://code.google.com/p/cog/issues/detail?id=119&q=luc >>>>>> >>>>>> >>>>>> On Wed, Jul 17, 2013 at 12:18 PM, Bernat Romagosa < >>>>>> tibabenfortlapala...@gmail.com> wrote: >>>>>> >>>>>>> I found out how to leave B3DAcceleratorPlugin out, but now I get >>>>>>> this error almost at the end of the compilation process: >>>>>>> >>>>>>> [ 95%] Building C object >>>>>>> CMakeFiles/CogVM.dir/home/bromagosa/blessed/platforms/unix/vm/sqUnixMain.c.o >>>>>>> In file included from >>>>>>> /home/bromagosa/blessed/platforms/unix/vm/sqUnixMain.c:41:0: >>>>>>> /home/bromagosa/blessed/platforms/Cross/vm/sqSCCSVersion.h:17:54: >>>>>>> fatal error: vmVersionInfo.h: El fitxer o directori no existeix >>>>>>> compilation terminated. >>>>>>> make[2]: *** >>>>>>> [CMakeFiles/CogVM.dir/home/bromagosa/blessed/platforms/unix/vm/sqUnixMain.c.o] >>>>>>> Error 1 >>>>>>> make[1]: *** [CMakeFiles/CogVM.dir/all] Error 2 >>>>>>> make: *** [all] Error 2 >>>>>>> >>>>>>> >>>>>>> "El fitxer o directori no existeix" is Catalan for "The file or >>>>>>> directory does not exist". >>>>>>> >>>>>>> How comes this header isn't there? >>>>>>> >>>>>>> >>>>>>> 2013/7/17 Bernat Romagosa <tibabenfortlapala...@gmail.com> >>>>>>> >>>>>>>> Ok, it seems the problem was not having the sources file in the >>>>>>>> same directory as the image. >>>>>>>> >>>>>>>> Anyway, now I've another problem when trying to compile. cmake runs >>>>>>>> fine, but make fails with the following error: >>>>>>>> >>>>>>>> Scanning dependencies of target B3DAcceleratorPlugin >>>>>>>> [ 57%] Building C object >>>>>>>> B3DAcceleratorPlugin/CMakeFiles/B3DAcceleratorPlugin.dir/home/bromagosa/blessed/src/plugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c.o >>>>>>>> In file included from >>>>>>>> /home/bromagosa/blessed/src/plugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c:36:0: >>>>>>>> /home/bromagosa/blessed/platforms/Cross/plugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.h:8:19: >>>>>>>> fatal error: GL/gl.h: El fitxer o directori no existeix >>>>>>>> compilation terminated. >>>>>>>> make[2]: *** >>>>>>>> [B3DAcceleratorPlugin/CMakeFiles/B3DAcceleratorPlugin.dir/home/bromagosa/blessed/src/plugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c.o] >>>>>>>> Error 1 >>>>>>>> make[1]: *** >>>>>>>> [B3DAcceleratorPlugin/CMakeFiles/B3DAcceleratorPlugin.dir/all] Error 2 >>>>>>>> make: *** [all] Error 2 >>>>>>>> >>>>>>>> >>>>>>>> Any ideas? >>>>>>>> >>>>>>>> (For the record, I do not need the B3DAcceleratorPlugin, so I guess >>>>>>>> it could just be left out, but I don't know how does one do that >>>>>>>> either) >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> 2013/7/16 Friedrich Dominicus <fr...@q-software-solutions.de> >>>>>>>> >>>>>>>>> Bernat Romagosa <tibabenfortlapala...@gmail.com> writes: >>>>>>>>> >>>>>>>>> > Hi Friedrich, >>>>>>>>> > >>>>>>>>> > My machine is already a 32 bits one... here's the output of ldd: >>>>>>>>> > >>>>>>>>> > linux-gate.so.1 => (0xb7782000) >>>>>>>>> > libm.so.6 => /lib/i386-linux-gnu/i686/cmov/libm.so.6 >>>>>>>>> > (0xb7746000) >>>>>>>>> > libdl.so.2 => /lib/i386-linux-gnu/i686/cmov/libdl.so.2 >>>>>>>>> > (0xb7742000) >>>>>>>>> > libpthread.so.0 => >>>>>>>>> > /lib/i386-linux-gnu/i686/cmov/libpthread.so.0 (0xb7728000) >>>>>>>>> > libc.so.6 => /lib/i386-linux-gnu/i686/cmov/libc.so.6 >>>>>>>>> > (0xb75c5000) >>>>>>>>> > /lib/ld-linux.so.2 (0xb7783000) >>>>>>>>> > >>>>>>>>> > Thanks! :) >>>>>>>>> Well that looks fine to me. Sorry that I could not help >>>>>>>>> >>>>>>>>> Regards >>>>>>>>> Friedrich >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> Bernat Romagosa. >>>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> Bernat Romagosa. >>>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>>> -- >>>>> Bernat Romagosa. >>>>> >>>> >>>> >>>> >>>> -- >>>> Bernat Romagosa. >>>> >>> >>> >> >> >> -- >> Bernat Romagosa. >> > > > > -- > Bernat Romagosa. > > > -- Bernat Romagosa.
