On 10/16/23 14:47, Nia Espera wrote:
Device tree files for OnePlus 9 and 9 Pro. Details of supported features
mentioned in the cover letter for this patch series, but for
accessibility also repeated here:
- USB OTG
- UFS
- Framebuffer display
- Touchscreen (for lemonade)
- Power & volume down keys
- Battery reading
- Modem, IPA, and remoteproc bringup
Steps to get booting:
- Wipe dtbo partition
- Flash vbmeta with disabled verity bit
- Flash kernel and initfs to boot partition with CLI args pd_ignore_unused
and clk_ignore_unused
- Flash rootfs to some other partition (probably super or userdata)
Signed-off-by: Nia Espera <[email protected]>
---
arch/arm64/boot/dts/qcom/Makefile | 2 +
.../arm64/boot/dts/qcom/sm8350-oneplus-common.dtsi | 1247 ++++++++++++++++++++
.../boot/dts/qcom/sm8350-oneplus-lemonade.dts | 82 ++
.../boot/dts/qcom/sm8350-oneplus-lemonadep.dts | 37 +
4 files changed, 1368 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/Makefile
b/arch/arm64/boot/dts/qcom/Makefile
index 2cca20563a1d..369ad4721b29 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -211,6 +211,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8250-xiaomi-elish-csot.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8350-hdk.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8350-microsoft-surface-duo2.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8350-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sm8350-oneplus-lemonade.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sm8350-oneplus-lemonadep.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8350-sony-xperia-sagami-pdx214.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8350-sony-xperia-sagami-pdx215.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8450-hdk.dtb
diff --git a/arch/arm64/boot/dts/qcom/sm8350-oneplus-common.dtsi
b/arch/arm64/boot/dts/qcom/sm8350-oneplus-common.dtsi
new file mode 100644
index 000000000000..2f6768f35259
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8350-oneplus-common.dtsi
@@ -0,0 +1,1247 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Caleb Connolly <[email protected]>
+ *
+ * Copyright (c) 2023 Igalia S.L.
+ * Authors:
+ * Nia Espera <[email protected]>
+ */
+
+#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pm8350b.h>
+#define SMB139x_1_SID 0x0b
+#define SMB139x_2_SID 0x0c
+#include <dt-bindings/iio/qcom,spmi-adc7-smb139x.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8350.dtsi"
+#include "pm8350.dtsi"
+#include "pm8350b.dtsi"
+#include "pm8350c.dtsi"
+#include "pmk8350.dtsi"
+#include "pmr735a.dtsi"
+#include "pmr735b.dtsi"
+
+/ {
+ /* As with the Sony devices, msm-id and board-id aren't needed here */
This became "common knowledge" since then, we can omit the comment now.
+ chassis-type = "handset";
+ interrupt-parent = <&intc>;
+
+ chosen {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ framebuffer: framebuffer@e4d00000 {
+ compatible = "simple-framebuffer";
+ reg = <0 0xe4d00000 0 0x2400000>;
+ width = <1080>;
+ height = <2412>;
+ stride = <(1080 * 4)>;
+ format = "a8r8g8b8";
+ /*
+ * That's (going to be) a lot of clocks, but it's
+ * necessary due to unused clk cleanup & no panel
+ * driver yet.
+ */
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&vol_down_n>;
+
+ key-vol-up {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ gpios = <&pmk8350_gpios 6 GPIO_ACTIVE_LOW>;
+ debounce-interval = <15>;
+ linux,can-disable;
+ wakeup-source;
+ };
+ };
+
+ bat: battery {
+ compatible = "simple-battery";
+ device-chemistry = "lithium-ion";
+ voltage-min-design-microvolt = <3200000>;
+ energy-full-design-microwatt-hours = <15840000>;
+ charge-full-design-microamp-hours = <2225000>;
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ display_panel_avdd: display_regulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "display_panel_avdd";
+ regulator-min-microvolt = <5500000>;
+ regulator-max-microvolt = <5500000>;
+ regulator-enable-ramp-delay = <233>;
+
+ enable-active-high;
+ regulator-boot-on;
+ };
+
+ /*
+ * Hack; OP9 bootloader specifically checks that the timer node has
+ * this label.
+ */
+ arch_timer: timer {};
+};
+
+&reserved_memory {
+ /* EFI splash screen */
+ memory@e1000000 {
framebuffer@e10...
+ reg = <0 0xe4d00000 0 0x02400000>;
+ no-map;
+ label = "cont_splash_region";
This label is unnecessary (perhaps even unused?)
+ };
+
+ ramoops: ramoops@E9700000 {
+ compatible = "ramoops";
+ reg = <0 0xe9700000 0 0x05b8000>;
+ record-size = <0x40000>;
+ console-size = <0x40000>;
+ ftrace-size = <0x200000>;
+ pmsg-size = <0x200000>;
+ devinfo-size = <0x08000>;
+ dumpinfo-size = <0x08000>;
+ rsv01info-size= <0x08000>;
+ rsv02info-size= <0x08000>;
+ rsv03info-size= <0x08000>;
+ rsv04info-size= <0x08000>;
+ rsv05info-size= <0x08000>;
+ ecc-size= <0x0>;
Please use a single space before and after the '=' sign.
Please drop the unused-and-undocumented properties (make CHECK_DTBS=1
qcom/sm8350-oneplus-lemonade.dtb)
+ };
+
+ /* bootloader log buffer */
+ memory@9fff7000 {
bootloader-log@, drop comment
+ reg = <0x00 0x9fff7000 0x00 0x8000>;
please be consistent with the usage of "different zeroes"
+ };
+
+ /* unknown; "param_mem" downstream */
+ memory@ea700000 {
reserved@, drop comment, probably it's for the kernel command line
parameters in some hacky setup, but if so, it would be freed the moment
Linux is jumped to.
[...]
+
+ /* regulators-2 unused for now */
Any good reason?
+
+ regulators-3 {
+ compatible = "qcom,pmr735a-rpmh-regulators";
+ qcom,pmic-id = "e";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+
+ vdd-l1-l2-supply = <&pmr735a_s2>;
+ vdd-l3-supply = <&pmr735a_s1>;
+ vdd-l4-supply = <&pm8350c_s1>;
+ vdd-l5-l6-supply = <&pm8350c_s1>;
+ vdd-l7-bob-supply = <&vreg_bob>;
+
+ pmr735a_s1: smps1 {
+ regulator-name = "pmr735a_s1";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1280000>;
+ };
+
+ pmr735a_s2: smps2 {
+ regulator-name = "pmr735a_s2";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <976000>;
+ };
+
+ pmr735a_s3: smps3 {
+ regulator-name = "pmr735a_s3";
+ regulator-min-microvolt = <2208000>;
+ regulator-max-microvolt = <2352000>;
+ };
+
+ pmr735a_l1: ldo1 {
+ regulator-name = "pmr735a_l1";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ };
+
+ pmr735a_l2: ldo2 {
+ regulator-name = "pmr735a_l2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pmr735a_l3: ldo3 {
+ regulator-name = "pmr735a_l3";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pmr735a_l4: ldo4 {
+ regulator-name = "pmr735a_l4";
+ regulator-min-microvolt = <1776000>;
+ regulator-max-microvolt = <1872000>;
+ };
+
+ pmr735a_l5: ldo5 {
+ regulator-name = "pmr735a_l5";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ };
+
+ pmr735a_l6: ldo6 {
+ regulator-name = "pmr735a_l6";
+ regulator-min-microvolt = <480000>;
+ regulator-max-microvolt = <904000>;
+ };
+
+ pmr735a_l7: ldo7 {
+ regulator-name = "pmr735a_l7";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+ };
+};
+
+&adsp {
+ firmware-name = "qcom/OnePlus/lemonade/adsp.mbn";
+ status = "okay";
+};
+
+&cdsp {
+ firmware-name = "qcom/OnePlus/lemonade/cdsp.mbn";
+ status = "okay";
+};
+
+&slpi {
+ firmware-name = "qcom/OnePlus/lemonade/slpi.mbn";
+ status = "okay";
+};
+
+&ipa {
+ qcom,gsi-loader = "self";
+ memory-region = <&pil_ipa_fw_mem>;
+ firmware-name = "qcom/OnePlus/lemonade/ipa_fws.mbn";
+ status = "okay";
+};
+
+&mpss {
+ firmware-name = "qcom/OnePlus/lemonade/modem.mbn",
+ "qcom/OnePlus/lemonade/mcfg_hw.mbn";
+
+ status = "okay";
+};
+
+&i2c4 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ /* Touchscreens: Syna TCM oncell or Samsung s6sy761 */
Synaptics with a samsung panel? Are you sure it's not a reference device
dt leftover?
[...]
+&pm8350_gpios {
+ usb2_vbus_boost_default: usb2_vbus_boost_default {
No underscores in node names, use '-', all throughout the file.
+ pins = "gpio8";
+ function = "normal";
+ output-low;
+ power-source = <0x00>; > + phandle = <0x5e1>;
Please drop the decompiler-generated phandle= properties
[...]
+ sde_dsi_active: sde-dsi-active {
+ pins = "gpio24";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable = <0>;
This is a boolean property, should be "bias-disable;"
[...]
+&usb_1 {
+ /* Bug in interconnect driver breaks USB */
+ /delete-property/ interconnects;
+ /delete-property/ interconnect-names;
Can you elaborate?
+
+ /*
+ * USB3 is not tested (though it is enabled downstream) so limit to
+ * high-speed for now.
+ */
+ qcom,select-utmi-as-pipe-clk;
+
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ /* Mode switching is untested */
+ dr_mode = "peripheral";
+ maximum-speed = "high-speed";
+ phys = <&usb_1_hsphy>;
+ phy-names = "usb2-phy";
+};
+
+&usb_1_hsphy {
+ vdda-pll-supply = <&pm8350_l5>;
+ vdda18-supply = <&pm8350c_l1>;
+ vdda33-supply = <&pm8350_l2>;
+
+ status = "okay";
+};
+
+/* Enabling this is necessary only for displayport */
If DP is wired up, I would strongly guess that USB3 is too.
+&usb_1_qmpphy {
+ vdda-phy-supply = <&pm8350_l6>;
+ vdda-pll-supply = <&pm8350_l1>;
+
+ status = "okay";
+};
+
+&i2c2 {
Please sort the node references alphabetically
+ clock-frequency = <100000>;
+ status = "okay";
+
+ bq27541: fuel-gauge@55 {
+ compatible = "ti,bq27541";
+ reg = <0x55>;
+ monitored-battery = <&bat>;
+ };
+};
+/* Crypto drivers currently fail & cause an XPU violation */
No need, see commit 4d29db2043610dd70be00a61f26fd64256a2a6c5
[...]
+ /* Modem antenna pins exclusive to lemonade */
+ rf_cable_ant1_active: rf_cable_ant1_active {
+ pins = "gpio27";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ rf_cable_ant2_active: rf_cable_ant2_active {
Please add a newline between subnodes
Konrad
