On Wed, 8 Nov 2023 at 19:50, Nia Espera <[email protected]> wrote:
>
> Device tree files for OnePlus 9 and 9 Pro. Details of supported features
> mentioned in the cover letter for this patch series, but for
> accessibility also repeated here:
>
> - USB OTG
> - UFS
> - Framebuffer display
> - Touchscreen (for lemonade)
> - Power & volume down keys
> - Battery reading
> - Modem, IPA, and remoteproc bringup
>
> Steps to get booting:
>
> - Wipe dtbo partition
> - Flash vbmeta with disabled verity bit
> - Flash kernel and initfs to boot partition with CLI args pd_ignore_unused
> and clk_ignore_unused as v1 bootimg
> - Flash rootfs to some other partition (probably super or userdata)
>
> Reviewed-by: Caleb Connolly <[email protected]>
> Signed-off-by: Nia Espera <[email protected]>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 2 +
> .../arm64/boot/dts/qcom/sm8350-oneplus-common.dtsi | 1088
> ++++++++++++++++++++
> .../boot/dts/qcom/sm8350-oneplus-lemonade.dts | 85 ++
> .../boot/dts/qcom/sm8350-oneplus-lemonadep.dts | 20 +
> 4 files changed, 1195 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile
> b/arch/arm64/boot/dts/qcom/Makefile
> index 2cca20563a1d..369ad4721b29 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -211,6 +211,8 @@ dtb-$(CONFIG_ARCH_QCOM) +=
> sm8250-xiaomi-elish-csot.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm8350-hdk.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm8350-microsoft-surface-duo2.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm8350-mtp.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sm8350-oneplus-lemonade.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sm8350-oneplus-lemonadep.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm8350-sony-xperia-sagami-pdx214.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm8350-sony-xperia-sagami-pdx215.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm8450-hdk.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sm8350-oneplus-common.dtsi
> b/arch/arm64/boot/dts/qcom/sm8350-oneplus-common.dtsi
> new file mode 100644
> index 000000000000..dd560035d2b5
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sm8350-oneplus-common.dtsi
> @@ -0,0 +1,1088 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2023 Igalia S.L.
> + * Authors:
> + * Nia Espera <[email protected]>
> + */
> +
> +#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
> +#include <dt-bindings/iio/qcom,spmi-adc7-pm8350b.h>
> +#define SMB139x_1_SID 0x0b
> +#define SMB139x_2_SID 0x0c
> +#include <dt-bindings/iio/qcom,spmi-adc7-smb139x.h>
> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> +#include "sm8350.dtsi"
> +#include "pm8350.dtsi"
> +#include "pm8350b.dtsi"
> +#include "pm8350c.dtsi"
> +#include "pmk8350.dtsi"
> +#include "pmr735a.dtsi"
> +#include "pmr735b.dtsi"
> +
> +/ {
> + chassis-type = "handset";
> + interrupt-parent = <&intc>;
> +
> + bat: battery {
> + compatible = "simple-battery";
> + device-chemistry = "lithium-ion";
> + voltage-min-design-microvolt = <3200000>;
> + energy-full-design-microwatt-hours = <15840000>;
> + charge-full-design-microamp-hours = <2225000>;
> + };
> +
> + chosen {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + framebuffer: framebuffer@e4d00000 {
> + compatible = "simple-framebuffer";
> + reg = <0 0xe4d00000 0 0x2400000>;
> + width = <1080>;
> + height = <2412>;
> + stride = <(1080 * 4)>;
> + format = "a8r8g8b8";
> + /*
> + * That's (going to be) a lot of clocks, but it's
> + * necessary due to unused clk cleanup & no panel
> + * driver yet.
> + */
> + clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
> + <&gcc GCC_DISP_SF_AXI_CLK>;
> + };
> + };
> +
> + display_panel_avdd: display-regulator {
Can you please rename to regulator-display?
> + compatible = "regulator-fixed";
> + regulator-name = "display_panel_avdd";
> + regulator-min-microvolt = <5500000>;
> + regulator-max-microvolt = <5500000>;
> + regulator-enable-ramp-delay = <233>;
> +
> + enable-active-high;
> + regulator-boot-on;
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&vol_down_n>;
> +
> + key-vol-up {
> + label = "Volume Up";
> + linux,code = <KEY_VOLUMEUP>;
> + gpios = <&pmk8350_gpios 6 GPIO_ACTIVE_LOW>;
> + debounce-interval = <15>;
> + linux,can-disable;
> + wakeup-source;
> + };
> + };
> +
> + pmic-glink {
> + compatible = "qcom,sm8350-pmic-glink", "qcom,pmic-glink";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + connector@0 {
> + compatible = "usb-c-connector";
> + reg = <0>;
> + power-role = "dual";
> + data-role = "dual";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + pmic_glink_hs_in: endpoint {
> + remote-endpoint =
> <&usb_1_dwc3_hs>;
> + };
> + };
> +
> + /* USB3 not working, so no port@1 */
> +
> + port@2 {
> + reg = <2>;
> +
> + pmic_glink_sbu: endpoint {
> + remote-endpoint =
> <&fsa4480_sbu_mux>;
> + };
> + };
> + };
> + };
> + };
> +
> + vph_pwr: vph-pwr-regulator {
... and this to regulator-vph-pwr, so that both regulators will be
close in the DT.
> + compatible = "regulator-fixed";
> + regulator-name = "vph_pwr";
> + regulator-min-microvolt = <3700000>;
> + regulator-max-microvolt = <3700000>;
> +
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +};
> +
> +&adsp {
> + firmware-name = "qcom/sm8350/lemonade/adsp.mbn";
Please add vendor too:
firmware-name = "qcom/sm8350/oneplus/lemonade/adsp.mbn";
(or OnePlus, as is their official name).
> + status = "okay";
> +};
> +
> +&apps_rsc {
> + regulators-0 {
> + compatible = "qcom,pm8350-rpmh-regulators";
> + qcom,pmic-id = "b";
> +
> + vdd-s1-supply = <&vph_pwr>;
> + vdd-s2-supply = <&vph_pwr>;
> + vdd-s3-supply = <&vph_pwr>;
> + vdd-s4-supply = <&vph_pwr>;
> + vdd-s5-supply = <&vph_pwr>;
> + vdd-s6-supply = <&vph_pwr>;
> + vdd-s7-supply = <&vph_pwr>;
> + vdd-s8-supply = <&vph_pwr>;
> + vdd-s9-supply = <&vph_pwr>;
> + vdd-s10-supply = <&vph_pwr>;
> + vdd-s11-supply = <&vph_pwr>;
> + vdd-s12-supply = <&vph_pwr>;
> +
> + vdd-l1-l4-supply = <&pm8350_s11>;
> + vdd-l2-l7-supply = <&vreg_bob>;
> + vdd-l3-l5-supply = <&vreg_bob>;
> + vdd-l6-l9-l10-supply = <&pm8350_s11>;
> + vdd-l8-supply = <&pmr735a_s2>;
> +
> + /*
> + * ARC regulators:
> + * S5 - mx.lvl
> + * S6 - gfx.lvl
> + * S9 - mxc.lvl
> + */
> +
> + pm8350_s10: smps10 {
> + regulator-name = "pm8350_s10";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8350_s11: smps11 {
> + regulator-name = "pm8350_s11";
> + regulator-min-microvolt = <752000>;
> + regulator-max-microvolt = <1012000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8350_s12: smps12 {
> + regulator-name = "pm8350_s12";
> + regulator-min-microvolt = <1224000>;
> + regulator-max-microvolt = <1360000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8350_l1: ldo1 {
> + regulator-name = "pm8350_l1";
> + regulator-min-microvolt = <912000>;
> + regulator-max-microvolt = <920000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8350_l2: ldo2 {
> + regulator-name = "pm8350_l2";
> + regulator-min-microvolt = <3072000>;
> + regulator-max-microvolt = <3072000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8350_l3: ldo3 {
> + regulator-name = "pm8350_l3";
> + regulator-min-microvolt = <904000>;
> + regulator-max-microvolt = <904000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + /* L4 - lmx.lvl (ARC) */
> +
> + pm8350_l5: ldo5 {
> + regulator-name = "pm8350_l5";
> + regulator-min-microvolt = <880000>;
> + regulator-max-microvolt = <888000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + regulator-allow-set-load;
> + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8350_l6: ldo6 {
> + regulator-name = "pm8350_l6";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1208000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + regulator-allow-set-load;
> + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8350_l7: ldo7 {
> + regulator-name = "pm8350_l7";
> + regulator-min-microvolt = <2400000>;
> + regulator-max-microvolt = <3008000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + regulator-allow-set-load;
> + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + /* L8 - lcx.lvl (ARC) */
> +
> + pm8350_l9: ldo9 {
> + regulator-name = "pm8350_l9";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + regulator-allow-set-load;
> + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +
> + regulators-1 {
> + compatible = "qcom,pm8350c-rpmh-regulators";
> + qcom,pmic-id = "c";
> +
> + vdd-s1-supply = <&vph_pwr>;
> + vdd-s2-supply = <&vph_pwr>;
> + vdd-s3-supply = <&vph_pwr>;
> + vdd-s4-supply = <&vph_pwr>;
> + vdd-s5-supply = <&vph_pwr>;
> + vdd-s6-supply = <&vph_pwr>;
> + vdd-s7-supply = <&vph_pwr>;
> + vdd-s8-supply = <&vph_pwr>;
> + vdd-s9-supply = <&vph_pwr>;
> + vdd-s10-supply = <&vph_pwr>;
> +
> + vdd-l1-l12-supply = <&pm8350c_s1>;
> + vdd-l2-l8-supply = <&pm8350c_s1>;
> + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
> + vdd-l6-l9-l11-supply = <&vreg_bob>;
> + vdd-l10-supply = <&pm8350_s12>;
> +
> + vdd-bob-supply = <&vph_pwr>;
> +
> + pm8350c_s1: smps1 {
> + regulator-name = "pm8350c_s1";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1952000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + /* S2 - ebi.lvl (ARC) */
> +
> + pm8350c_s3: smps3 {
> + regulator-name = "pm8350c_s3";
> + regulator-min-microvolt = <300000>;
> + regulator-max-microvolt = <704000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + /*
> + * ARC regulators:
> + * S4 - mss.lvl
> + * S6 - cx.lvl
> + * S8 - mmcx.lvl
> + */
> +
> + pm8350c_s10: smps10 {
> + regulator-name = "pm8350c_s10";
> + regulator-min-microvolt = <1048000>;
> + regulator-max-microvolt = <1128000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8350c_l1: ldo1 {
> + regulator-name = "pm8350c_l1";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8350c_l2: ldo2 {
> + regulator-name = "pm8350c_l2";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8350c_l3: ldo3 {
> + regulator-name = "pm8350c_l3";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8350c_l4: ldo4 {
> + regulator-name = "pm8350c_l4";
> + regulator-min-microvolt = <1704000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8350c_l5: ldo5 {
> + regulator-name = "pm8350c_l5";
> + regulator-min-microvolt = <1704000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8350c_l6: ldo6 {
> + regulator-name = "pm8350c_l6";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2960000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8350c_l7: ldo7 {
> + regulator-name = "pm8350c_l7";
> + regulator-min-microvolt = <3008000>;
> + regulator-max-microvolt = <3008000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8350c_l8: ldo8 {
> + regulator-name = "pm8350c_l8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8350c_l9: ldo9 {
> + regulator-name = "pm8350c_l9";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <3008000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8350c_l10: ldo10 {
> + regulator-name = "pm8350c_l10";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8350c_l11: ldo11 {
> + regulator-name = "pm8350c_l11";
> + regulator-min-microvolt = <2400000>;
> + regulator-max-microvolt = <3008000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8350c_l12: ldo12 {
> + regulator-name = "pm8350c_l12";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8350c_l13: ldo13 {
> + regulator-name = "pm8350c_l13";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3200000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_bob: bob {
> + regulator-name = "vreg_bob";
> + regulator-min-microvolt = <3400000>;
> + regulator-max-microvolt = <3960000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
> + };
> + };
> +
> + /* pm8350b has one regulator here; unused for now */
> +
> + regulators-2 {
> + compatible = "qcom,pmr735a-rpmh-regulators";
> + qcom,pmic-id = "e";
> +
> + vdd-s1-supply = <&vph_pwr>;
> + vdd-s2-supply = <&vph_pwr>;
> + vdd-s3-supply = <&vph_pwr>;
> +
> + vdd-l1-l2-supply = <&pmr735a_s2>;
> + vdd-l3-supply = <&pmr735a_s1>;
> + vdd-l4-supply = <&pm8350c_s1>;
> + vdd-l5-l6-supply = <&pm8350c_s1>;
> + vdd-l7-bob-supply = <&vreg_bob>;
> +
> + pmr735a_s1: smps1 {
> + regulator-name = "pmr735a_s1";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1280000>;
> + };
> +
> + pmr735a_s2: smps2 {
> + regulator-name = "pmr735a_s2";
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <976000>;
> + };
> +
> + pmr735a_s3: smps3 {
> + regulator-name = "pmr735a_s3";
> + regulator-min-microvolt = <2208000>;
> + regulator-max-microvolt = <2352000>;
> + };
> +
> + pmr735a_l1: ldo1 {
> + regulator-name = "pmr735a_l1";
> + regulator-min-microvolt = <912000>;
> + regulator-max-microvolt = <912000>;
> + };
> +
> + pmr735a_l2: ldo2 {
> + regulator-name = "pmr735a_l2";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + };
> +
> + pmr735a_l3: ldo3 {
> + regulator-name = "pmr735a_l3";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + };
> +
> + pmr735a_l4: ldo4 {
> + regulator-name = "pmr735a_l4";
> + regulator-min-microvolt = <1776000>;
> + regulator-max-microvolt = <1872000>;
> + };
> +
> + pmr735a_l5: ldo5 {
> + regulator-name = "pmr735a_l5";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <800000>;
> + };
> +
> + pmr735a_l6: ldo6 {
> + regulator-name = "pmr735a_l6";
> + regulator-min-microvolt = <480000>;
> + regulator-max-microvolt = <904000>;
> + };
> +
> + pmr735a_l7: ldo7 {
> + regulator-name = "pmr735a_l7";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + };
> + };
> +};
> +
> +&cdsp {
> + firmware-name = "qcom/sm8350/lemonade/cdsp.mbn";
> + status = "okay";
> +};
> +
> +&i2c2 {
> + clock-frequency = <100000>;
> + status = "okay";
> +
> + bq27541: fuel-gauge@55 {
> + compatible = "ti,bq27541";
> + reg = <0x55>;
> + monitored-battery = <&bat>;
> + };
> +};
> +
> +&i2c4 {
> + clock-frequency = <400000>;
> + status = "okay";
> +
> + /* Touchscreens: Syna TCM oncell or Samsung s6sy761 */
> +};
> +
> +&i2c13 {
> + clock-frequency = <100000>;
> + status = "okay";
> +
> + typec-mux@42 {
> + compatible = "fcs,fsa4480";
> + reg = <0x42>;
> +
> + interrupts-extended = <&tlmm 2 IRQ_TYPE_LEVEL_LOW>;
> +
> + vcc-supply = <&vreg_bob>;
> + mode-switch;
> + orientation-switch;
> +
> + port {
> + fsa4480_sbu_mux: endpoint {
> + remote-endpoint = <&pmic_glink_sbu>;
> + };
> + };
> + };
> +
> + /* Qualcomm PM8008i/PM8008j @ 8, 9, c, d */
> +};
> +
> +&i2c15 {
> + clock-frequency = <400000>;
> + status = "okay";
> +
> + /* sn-nci NFC controller @ 28 */
> +};
> +
> +&gpi_dma0 {
> + status = "okay";
> +};
> +
> +&gpi_dma1 {
> + status = "okay";
> +};
> +
> +&gpi_dma2 {
> + status = "okay";
> +};
> +
> +&ipa {
> + qcom,gsi-loader = "self";
> + memory-region = <&pil_ipa_fw_mem>;
> + firmware-name = "qcom/sm8350/lemonade/ipa_fws.mbn";
> + status = "okay";
> +};
> +
> +&mpss {
> + firmware-name = "qcom/sm8350/lemonade/modem.mbn";
> + status = "okay";
> +};
> +
> +&pcie0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pcie0_default_state>;
> +
> + perst-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
> + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
> +
> + status = "okay";
> +};
> +
> +&pcie0_phy {
> + vdda-phy-supply = <&pm8350_l5>;
> + vdda-pll-supply = <&pm8350_l6>;
> +
> + status = "okay";
> +};
> +
> +&pm8350_gpios {
> + gpio1_adc_default: gpio1-adc-default-state {
> + pins = "gpio1";
> + function = "normal";
> + bias-high-impedance;
> + bias-disable;
> + };
> +
> + gpio3_adc_default: gpio3-adc-default-state {
> + pins = "gpio3";
> + function = "normal";
> + bias-high-impedance;
> + bias-disable;
> + };
> +};
> +
> +&pm8350_gpios {
You can probably merge these two nodes (unless there is a typo somewhere).
> + vol_down_n: vol-down-n-state {
> + pins = "gpio6";
> + function = "normal";
> + power-source = <1>;
> + bias-pull-up;
> + input-enable;
> + };
> +};
> +
> +&pmk8350_adc_tm {
> + status = "okay";
> +
> + pm8350-msm-therm@0 {
> + reg = <0>;
> + io-channels = <&pmk8350_vadc
> PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
> + qcom,ratiometric;
> + qcom,hw-settle-time-us = <200>;
> + };
> +
> + pm8350-cam-flash-therm@1 {
> + reg = <1>;
> + io-channels = <&pmk8350_vadc
> PM8350_ADC7_AMUX_THM2_100K_PU(1)>;
> + qcom,ratiometric;
> + qcom,hw-settle-time-us = <200>;
> + };
> +
> + pm8350-hot-pocket-therm@2 {
> + reg = <2>;
> + io-channels = <&pmk8350_vadc
> PM8350_ADC7_AMUX_THM3_100K_PU(1)>;
> + qcom,ratiometric;
> + qcom,hw-settle-time-us = <200>;
> + };
> +
> + pm8350-wide-rfc-therm@3 {
> + reg = <3>;
> + io-channels = <&pmk8350_vadc
> PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
> + qcom,ratiometric;
> + qcom,hw-settle-time-us = <200>;
> + };
> +
> + pm8350-rear-tof-therm@4 {
> + reg = <4>;
> + io-channels = <&pmk8350_vadc
> PM8350_ADC7_AMUX_THM5_100K_PU(1)>;
> + qcom,ratiometric;
> + qcom,hw-settle-time-us = <200>;
> + };
> +
> + pm8350b-usb-conn-therm@5 {
> + reg = <5>;
> + io-channels = <&pmk8350_vadc PM8350B_ADC7_AMUX_THM4_100K_PU>;
> + qcom,ratiometric;
> + qcom,hw-settle-time-us = <200>;
> + };
> +
> + pm8350b-wl-chg-therm@6 {
> + reg = <6>;
> + io-channels = <&pmk8350_vadc PM8350B_ADC7_GPIO2_100K_PU>;
> + qcom,ratiometric;
> + qcom,hw-settle-time-us = <200>;
> + };
> +};
> +
> +&pmk8350_rtc {
> + status = "okay";
> +};
> +
> +&pmk8350_vadc {
> + pinctrl-names = "default";
> + pinctrl-0 = <&gpio1_adc_default>, <&gpio3_adc_default>;
> +
> + /* pmk8350-ref-gnd */
> + channel@0 {
> + reg = <0x00>;
> + qcom,pre-scaling = <1 1>;
> + label = "pmk8350_ref_gnd";
> + };
> +
> + /* pmk8350-vref-1p25 */
> + channel@1 {
> + reg = <0x01>;
> + qcom,pre-scaling = <1 1>;
> + label = "pmk8350_vref_1p25";
> + };
> +
> + /* pmk8350-die-temp */
> + channel@3 {
> + reg = <0x03>;
> + qcom,pre-scaling = <1 1>;
> + label = "pmk8350_die_temp";
> + };
> +
> + /* pm8350-ref-gnd */
> + channel@100 {
> + reg = <0x100>;
> + qcom,pre-scaling = <1 1>;
> + label = "pm8350_ref_gnd";
> + };
> +
> + /*pm8350-vref-1p25*/
> + channel@101 {
> + reg = <0x101>;
> + qcom,pre-scaling = <1 1>;
> + label = "pm8350_vref_1p25";
> + };
> +
> + /* pm8350-die-temp */
> + channel@103 {
> + reg = <0x103>;
> + qcom,pre-scaling = <1 1>;
> + label = "pm8350_die_temp";
> + };
> +
> + /* gpio1-v */
> + channel@128 {
> + reg = <0x128>;
> + qcom,ratiometric;
> + qcom,hw-settle-time = <700>;
> + qcom,pre-scaling = <1 1>;
> + label = "gpio1_v";
> + };
> +
> + /* gpio3-v */
> + channel@12b {
> + reg = <0x12b>;
> + qcom,ratiometric;
> + qcom,hw-settle-time = <700>;
> + qcom,pre-scaling = <1 1>;
> + label = "gpio3_v";
> + };
> +
> + /* pm8350-msm-therm */
> + channel@144 {
> + reg = <PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
> + qcom,ratiometric;
> + qcom,hw-settle-time = <200>;
> + qcom,pre-scaling = <1 1>;
> + label = "pm8350_msm_therm";
> + };
> +
> + /* pm8350-cam-flash-therm */
> + channel@145 {
> + reg = <PM8350_ADC7_AMUX_THM2_100K_PU(1)>;
> + qcom,ratiometric;
> + qcom,hw-settle-time = <200>;
> + qcom,pre-scaling = <1 1>;
> + label = "pm8350_cam_flash_therm";
> + };
> +
> + /* pm8350-hot-pocket-therm */
> + channel@146 {
> + reg = <PM8350_ADC7_AMUX_THM3_100K_PU(1)>;
> + qcom,ratiometric;
> + qcom,hw-settle-time = <200>;
> + qcom,pre-scaling = <1 1>;
> + label = "pm8350_hot_pocket_therm";
> + };
> +
> + /* pm8350-wide-rfc-therm */
> + channel@147 {
> + reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
> + qcom,ratiometric;
> + qcom,hw-settle-time = <200>;
> + qcom,pre-scaling = <1 1>;
> + label = "pm8350_wide_rfc_therm";
> + };
> +
> + /* pm8350-rear-tof-therm */
> + channel@148 {
> + reg = <PM8350_ADC7_AMUX_THM5_100K_PU(1)>;
> + qcom,ratiometric;
> + qcom,hw-settle-time = <200>;
> + qcom,pre-scaling = <1 1>;
> + label = "pm8350_rear_tof_therm";
> + };
> +
> + /* pm8350-vph-pwr */
> + channel@18e {
> + reg = <0x18e>;
> + qcom,pre-scaling = <1 3>;
> + label = "pm8350_vph_pwr";
> + };
> +
> + /* pm8350b-ref-gnd */
> + channel@300 {
> + reg = <0x300>;
> + qcom,pre-scaling = <1 1>;
> + label = "pm8350b_ref_gnd";
> + };
> +
> + /* pm8350b-vref-1p25 */
> + channel@301 {
> + reg = <0x301>;
> + qcom,pre-scaling = <1 1>;
> + label = "pm8350b_vref_1p25";
> + };
> +
> + /* pm8350b-die-temp */
> + channel@303 {
> + reg = <0x303>;
> + qcom,pre-scaling = <1 1>;
> + label = "pm8350b_die_temp";
> + };
> +
> + /* pm8350b-chg-temp */
> + channel@310 {
> + reg = <PM8350B_ADC7_CHG_TEMP>;
> + qcom,pre-scaling = <1 1>;
> + label = "pm8350b_chg_temp";
> + };
> +
> + /* pm8350b-usb-conn-therm */
> + channel@347 {
> + reg = <PM8350B_ADC7_AMUX_THM4_100K_PU>;
> + qcom,ratiometric;
> + qcom,hw-settle-time = <200>;
> + qcom,pre-scaling = <1 1>;
> + label = "pm8350b_usb_conn_therm";
> + };
> +
> + /* pm8350b-wl-chg-therm */
> + channel@34b {
> + reg = <PM8350B_ADC7_GPIO2_100K_PU>;
> + qcom,ratiometric;
> + qcom,hw-settle-time = <200>;
> + qcom,pre-scaling = <1 1>;
> + label = "pm8350b_wl_chg_therm";
> + };
> +
> + /* pm8350b-vph-pwr */
> + channel@38e {
> + reg = <0x38e>;
> + qcom,pre-scaling = <1 3>;
> + label = "pm8350b_vph_pwr";
> + };
> +
> + /* pm8350b-vbat-sns */
> + channel@38f {
> + reg = <0x38f>;
> + qcom,pre-scaling = <1 3>;
> + label = "pm8350b_vbat_sns";
> + };
> +
> + /* pmr735a-ref-gnd */
> + channel@400 {
> + reg = <0x400>;
> + qcom,pre-scaling = <1 1>;
> + label = "pmr735a_ref_gnd";
> + };
> +
> + /* pmr735a-vref-1p25 */
> + channel@401 {
> + reg = <0x401>;
> + qcom,pre-scaling = <1 1>;
> + label = "pmr735a_vref_1p25";
> + };
> +
> + /* pmr735a-die-temp */
> + channel@403 {
> + reg = <0x403>;
> + qcom,pre-scaling = <1 1>;
> + label = "pmr735a_die_temp";
> + };
> +
> + /* pmr735b-ref-gnd */
> + channel@500 {
> + reg = <0x500>;
> + qcom,pre-scaling = <1 1>;
> + label = "pmr735b_ref_gnd";
> + };
> +
> + /* pmr735b-vref-1p25 */
> + channel@501 {
> + reg = <0x501>;
> + qcom,pre-scaling = <1 1>;
> + label = "pmr735b_vref_1p25";
> + };
> +
> + /* pmr735b-die-temp */
> + channel@503 {
> + reg = <0x503>;
> + qcom,pre-scaling = <1 1>;
> + label = "pmr735b_die_temp";
> + };
> +
> + /* smb139x-1-smb-temp */
> + channel@b06 {
> + reg = <SMB139x_1_ADC7_SMB_TEMP>;
> + qcom,pre-scaling = <1 1>;
> + label = "smb139x_1_smb_temp";
> + };
> +
> + /* smb139x-2-smb-temp */
> + channel@c06 {
> + reg = <SMB139x_2_ADC7_SMB_TEMP>;
> + qcom,pre-scaling = <1 1>;
> + label = "smb139x_2_smb_temp";
> + };
> +};
> +
> +&pon_pwrkey {
> + status = "okay";
> +};
> +
> +&pon_resin {
> + linux,code = <KEY_VOLUMEUP>;
> + status = "okay";
> +};
> +
> +&qupv3_id_0 {
> + status = "okay";
> +};
> +
> +&qupv3_id_1 {
> + status = "okay";
> +};
> +
> +&qupv3_id_2 {
> + status = "okay";
> +};
> +
> +&reserved_memory {
> + bootloader-log@9fff7000 {
> + reg = <0 0x9fff7000 0 0x8000>;
> + };
> +
> + framebuffer@e1000000 {
> + reg = <0 0xe4d00000 0 0x2400000>;
> + no-map;
> + };
> +
> + ramoops: ramoops@E9700000 {
> + compatible = "ramoops";
> + reg = <0 0xe9700000 0 0x5b8000>;
> + record-size = <0x40000>;
> + console-size = <0x40000>;
> + ftrace-size = <0x200000>;
> + pmsg-size = <0x200000>;
> + ecc-size = <0>;
> + };
> +
> + reserved@ea700000 {
> + reg = <0 0xea700000 0 0x800000>;
> + };
> +};
> +
> +&removed_mem {
> + reg = <0 0xd8800000 0 0x8e00000>;
> +};
> +
> +&slpi {
> + firmware-name = "qcom/sm8350/lemonade/slpi.mbn";
> + status = "okay";
> +};
> +
> +&tlmm {
> + gpio-reserved-ranges = <52 8>;
> +
> + pcie0_default_state: pcie0-default-state {
> + perst-pins {
> + pins = "gpio94";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-pull-down;
> + };
> +
> + clkreq-pins {
> + pins = "gpio95";
> + function = "pcie0_clkreqn";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + wake-pins {
> + pins = "gpio96";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + sleep-pins {
> + pins = "gpio95";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> + };
> +
> + pcie1_default_state: pcie1-default-state {
> + perst-pins {
> + pins = "gpio97";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-pull-down;
> + };
> +
> + clkreq-pins {
> + pins = "gpio98";
> + function = "pcie1_clkreqn";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + wake-pins {
> + pins = "gpio99";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-pull-up;
> + /* wil6210_refclk_en_pin lives here also */
> + };
> + };
> +
> + /* Modem-related pin common on both devices */
> + rf_cable_ant0_active: rf-cable-ant0-active-state {
> + pins = "gpio165";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + tp_rst_active: tp-rst-active-state {
> + pins = "gpio22";
> + function = "gpio";
> + drive-strength = <8>;
> + bias-pull-up;
> + };
> +
> + /* tp_rst_suspend pinctrl is different per device, don't specify here
> */
> +
> + tp_irq_active: tp-irq-active-state {
> + pins = "gpio23";
> + function = "gpio";
> + drive-strength = <8>;
> + bias-disable;
> + };
> +
> + tp_irq_suspend: tp-irq-suspend-state {
> + pins = "gpio23";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-pull-down;
> + };
> +};
> +
> +&ufs_mem_hc {
> + reset-gpios = <&tlmm 203 GPIO_ACTIVE_LOW>;
> +
> + vcc-supply = <&pm8350_l7>;
> + vcc-max-microamp = <800000>;
> + vccq-supply = <&pm8350_l9>;
> + vccq-max-microamp = <900000>;
> +
> + status = "okay";
> +};
> +
> +&ufs_mem_phy {
> + vdda-phy-supply = <&pm8350_l5>;
> + vdda-pll-supply = <&pm8350_l6>;
> +
> + status = "okay";
> +};
> +
> +&usb_1 {
> + /*
> + * Bug in interconnect driver breaks USB; RPMh is unable to power on
> + * USB regulators without this.
> + */
> + /delete-property/ interconnects;
> + /delete-property/ interconnect-names;
> +
> + /* USB3 seems broken (though it's enabled downstream?) */
> + qcom,select-utmi-as-pipe-clk;
> +
> + status = "okay";
> +};
> +
> +&usb_1_dwc3 {
> + dr_mode = "otg";
> + maximum-speed = "high-speed";
> + phys = <&usb_1_hsphy>;
> + phy-names = "usb2-phy";
> +};
> +
> +&usb_1_dwc3_hs {
> + remote-endpoint = <&pmic_glink_hs_in>;
> +};
> +
> +&usb_1_hsphy {
> + vdda-pll-supply = <&pm8350_l5>;
> + vdda18-supply = <&pm8350c_l1>;
> + vdda33-supply = <&pm8350_l2>;
> +
> + status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/qcom/sm8350-oneplus-lemonade.dts
> b/arch/arm64/boot/dts/qcom/sm8350-oneplus-lemonade.dts
> new file mode 100644
> index 000000000000..473f10d4fcf0
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sm8350-oneplus-lemonade.dts
> @@ -0,0 +1,85 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2023 Igalia S.L.
> + * Authors:
> + * Nia Espera <[email protected]>
> + */
> +
> +/dts-v1/;
> +
> +#include "sm8350-oneplus-common.dtsi"
> +
> +/ {
> + compatible = "oneplus,lemonade", "qcom,sm8350";
> + model = "OnePlus 9";
> +};
> +
> +&i2c4 {
> + touchscreen@48 {
> + compatible = "samsung,s6sy761";
> + reg = <0x48>;
> + interrupts-extended = <&tlmm 23 IRQ_TYPE_LEVEL_LOW>;
> +
> + avdd-supply = <&pm8350c_l13>;
> + vdd-supply = <&pm8350c_l8>;
> +
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&tp_rst_active>, <&tp_irq_active>,
> <&tp_enable_2v8>;
> + pinctrl-1 = <&tp_rst_suspend>, <&tp_irq_suspend>;
> + };
> +};
> +
> +&mpss {
> + pinctrl-names = "default";
> + pinctrl-0 = <&rf_cable_ant0_active>,
> + <&rf_cable_ant1_active>,
> + <&rf_cable_ant2_active>,
> + <&rf_cable_ant3_active>,
> + <&rf_cable_ant7_active>;
> +};
> +
> +&tlmm {
> + /* Modem antenna pins exclusive to lemonade */
> + rf_cable_ant1_active: rf-cable-ant1-active-state {
> + pins = "gpio27";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + rf_cable_ant2_active: rf-cable-ant2-active-state {
> + pins = "gpio92";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + rf_cable_ant3_active: rf-cable-ant3-active-state {
> + pins = "gpio44";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + rf_cable_ant7_active: rf-cable-ant7-active-state {
> + pins = "gpio155";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + tp_rst_suspend: tp-rst-suspend-state {
> + pins = "gpio22";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-pull-down;
> + };
> +
> + tp_enable_2v8: tp-enable-2v8-state {
> + pins = "gpio74";
> + function = "gpio";
> + drive-strength = <8>;
> + bias-pull-up;
> + output-high;
> + };
> +};
> diff --git a/arch/arm64/boot/dts/qcom/sm8350-oneplus-lemonadep.dts
> b/arch/arm64/boot/dts/qcom/sm8350-oneplus-lemonadep.dts
> new file mode 100644
> index 000000000000..bc7e5654bd3d
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sm8350-oneplus-lemonadep.dts
> @@ -0,0 +1,20 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2023 Igalia S.L.
> + * Authors:
> + * Nia Espera <[email protected]>
> + */
> +
> +/dts-v1/;
> +
> +#include "sm8350-oneplus-common.dtsi"
> +
> +/ {
> + compatible = "oneplus,lemonadep", "qcom,sm8350";
> + model = "OnePlus 9 Pro";
> +};
> +
> +&mpss {
> + pinctrl-names = "default";
> + pinctrl-0 = <&rf_cable_ant0_active>;
> +};
>
> --
> 2.42.1
>
>
--
With best wishes
Dmitry
