Hi Luis, On Wed, May 01, 2024 at 09:24:38AM -0600, [email protected] wrote: > From: Ondrej Jirman <[email protected]> > > Add powerdown-gpio binding as it is required for some boards.
I thought the conclusion was that this wasn't a property of the sensor? If it needs to be controlled, then this should take place somewhere else than in the sensor driver. > > Signed-off-by: Ondrej Jirman <[email protected]> > Signed-off-by: Luis Garcia <[email protected]> > Reviewed-by: Krzysztof Kozlowski <[email protected]> > Reviewed-by: Pavel Machek <[email protected]> > --- > Documentation/devicetree/bindings/media/i2c/sony,imx258.yaml | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx258.yaml > b/Documentation/devicetree/bindings/media/i2c/sony,imx258.yaml > index c978abc0cdb3..33338139e6e8 100644 > --- a/Documentation/devicetree/bindings/media/i2c/sony,imx258.yaml > +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx258.yaml > @@ -36,6 +36,10 @@ properties: > reg: > maxItems: 1 > > + powerdown-gpios: > + description: > + Reference to the GPIO connected to the PWDN pin, if any. > + > reset-gpios: > description: |- > Reference to the GPIO connected to the XCLR pin, if any. -- Regards, Sakari Ailus
