Doug, The door knobs on your VV-300 are part number 5604GP. They are 3/4" diameter at the large end, gold plated and have three concentric rings on the outer face. The 300 horn doors (HD) and end doors (ED) all use the same size knob.
These knobs are also used on the horn doors of the XVII and 130 and both the HD and ED of the 230, 300 and 330. I do not have a set but perhaps this info will help others in locating them for you. In case you need this too the gold motor board knob (1461GP) is common to just about every Victrola with gold plating and should be easier to find. Mark Silver Spring, MD -----Original Message----- From: David Dazer <dda...@sbcglobal.net> Sent: Aug 21, 2005 8:20 PM To: Antique Phonograph List <phono-l@oldcrank.org> Subject: Re: [Phono-L] Victrola 300 Door Knobs... Doug, Are those gold by any chance? Dave "Douglas E. Curran" <batwings78...@starpower.net> wrote: Greetings: Looking for four (4) door knobs for a Victrola 300. Thanks very much! Cheers, ETC. Doug -- _______________________________________________ Phono-L mailing list Phono-L@oldcrank.org Phono-L Archive http://www.oldcrank.org/pipermail/phono-l/ _______________________________________________ Phono-L mailing list Phono-L@oldcrank.org Phono-L Archive http://www.oldcrank.org/pipermail/phono-l/