Of course this one has the swivel shoulders. Also this weight is a repro, so I don't know if that would affect anything. Never know if the measurements are exact on repros. Thanks for the info. I played this last night and it sounded like crap. What do you recommend for link wire? How flexible? I have copper wire and very fine steel wire, almost like heavy thread. John Sent from my Verizon Wireless BlackBerry
-----Original Message----- From: Steven Medved <steve_nor...@msn.com> Date: Tue, 11 May 2010 15:45:20 To: Phono-l<phono-l@oldcrank.org> Subject: Re: [Phono-L] Model K reproducer HELP!!! On all Edison reproducers except for the L M and O and I think N when held upsidedown by the sound tube the stylus bars should be horizontal. The secret of the K is to have the working bar horizontal. You can do this depending on the holes in the bars with a loop like a ? or one that is like a flattened question mark. I start with the C bar and have it horizontal, then add the H bar and make certain the addition does not affect the C bar. Paul Baker used the ? the Edison ones I have seen used the ? with the flattened top. I also use the flattened top, it seems to work better. The S is also challenging, I had one that worked on my standard but not on the owners home so I had to redo. The new diaphragms are much easier, on the original style you had to cut a straight pin and it took me over 20 tries. A measurement of the link would give you a good idea, but the hinge block position ans size of the holes in the bars also affects this. There are two types of the K, the early one with the swivel shoulders and the later one with the solid shoulders. The solid shoulders are easier to work with. > Hello all > Does anyone know the length for the link wire for the Model K reproducer? I > am putting one together out of parts and I have been working on it for 3 > hours trying to get the link right. I am about blind from installing and > removing the sapphire bars several times. My brain has ceased to function. > Next time I'll send it out to be done! I have done this before, but at that > time I had some original dealers stock links! > It seems to me that the tails of the sapphire bars should very slightly point > upward when the weight is flat against the reproducer top...currently the > point slightly inward (toward the diaphragm) which tells me the link is too > short. So does anyone have an exact measurement? I don't have another K to > compare it to at the moment. > Thanks for any assistance! > John Robles > > _______________________________________________ > Phono-L mailing list > http://phono-l.oldcrank.org _______________________________________________ Phono-L mailing list http://phono-l.oldcrank.org _______________________________________________ Phono-L mailing list http://phono-l.oldcrank.org
