ID: 22077 User updated by: [EMAIL PROTECTED] Reported By: [EMAIL PROTECTED] -Status: Feedback +Status: Open Bug Type: Compile Failure Operating System: OpenBSD 3.2 sparc64 PHP Version: 4.3.0 New Comment:
[root@web root]# gcc -v Reading specs from /usr/lib/gcc-lib/sparc64-unknown-openbsd3.2/2.95.3/specs gcc version 2.95.3 20010125 (prerelease) Previous Comments: ------------------------------------------------------------------------ [2003-02-11 17:14:25] [EMAIL PROTECTED] Looks like a compiler bug to me since the very same code compiles fine with other compilers. What compiler are you using? ------------------------------------------------------------------------ [2003-02-05 11:42:01] [EMAIL PROTECTED] Fix: use -O0 on sha1.c during compilation. Error: I was trying to compile php-4.3.0 on an Ultra-5 & an Ultra-10 (dmesg at the bottom). Both boxes run OpenBSD 3.2-sparc64. What happens is that the compiler hangs on sha1.c. It seems as if there are way too many macro's in there. I removed the macro's and the file did compile. The macro's that hang the compiler are (php-4.3.0/ext/standard/sha1.c line 144): /* FF, GG, HH, and II transformations for rounds 1, 2, 3, and 4. */ #define FF(a, b, c, d, e, w) { \ (e) += F ((b), (c), (d)) + (w) + (php_uint32)(0x5A827999); \ (e) += ROTATE_LEFT ((a), 5); \ (b) = ROTATE_LEFT((b), 30); \ } #define GG(a, b, c, d, e, w) { \ (e) += G ((b), (c), (d)) + (w) + (php_uint32)(0x6ED9EBA1); \ (e) += ROTATE_LEFT ((a), 5); \ (b) = ROTATE_LEFT((b), 30); \ } #define HH(a, b, c, d, e, w) { \ (e) += H ((b), (c), (d)) + (w) + (php_uint32)(0x8F1BBCDC); \ (e) += ROTATE_LEFT ((a), 5); \ (b) = ROTATE_LEFT((b), 30); \ } #define II(a, b, c, d, e, w) { \ (e) += I ((b), (c), (d)) + (w) + (php_uint32)(0xCA62C1D6); \ (e) += ROTATE_LEFT ((a), 5); \ (b) = ROTATE_LEFT((b), 30); \ } Note all the embedded macro's (F, G, H, I, ROTATE_LEFT). Anyway, has anyone run into this and figured out a fix? I will try to compile the same code on Intel and see what happens. I searched the web, mail archives and the php archives. More details: PHP requires quite a bit of lib's so I installed the following from the ports: curl-7.9.8.tgz gdbm-1.8.0.tgz libiconv-1.8.tgz pkgconfig-0.12.0.tgz libxml-2.4.24.tgz jpeg-6b.tgz png-1.2.4.tgz gettext-0.10.40.tgz gmake-3.79.1.tgz expat-1.95.4.tgz sablotron-0.96.tgz libxslt-1.0.20.tgz I compiled the following ones from source: freetype2.1.3 imap-wu-2002 (coppied the headers manually to /usr/local/include) libmcal-0.6 (coppied the headers manually to /usr/local/include) I configured PHP as follows: ./configure --prefix=/usr/local/php --with-openssl --with-zlib --enable-bcma th --enable-calendar --with-curl --with-gdbm --with-dom --with-gd --with-jpe g-dir --with-png-dir=/usr/local --with-freetype-dir --enable-gd-native-ttf - -with-imap --with-mcal --with-mysql=/usr/local/mysql --enable-xslt --with-ex pat-dir=/usr/local --with-iconv=/usr/local --with-dom-xslt --with-xslt-sablo t=/usr/local --with-expat-dir=/usr/local --with-iconv-dir=/usr/local Top after running overnight: load averages: 1.15, 1.17, 1.16 09:41:52 15 processes: 2 running, 13 idle CPU states: 98.8% user, 0.0% nice, 1.2% system, 0.0% interrupt, 0.0% idle Memory: Real: 15M/38M act/tot Free: 207M Swap: 3896K/256M used/tot Command not understood PID USERNAME PRI NICE SIZE RES STATE WAIT TIME CPU COMMAND 32291 root 64 0 8312K 8696K run - 730:13 98.39% cc1 15610 root 28 0 240K 1520K run - 0:00 0.29% top 32651 root 2 0 792K 896K sleep select 0:07 0.00% sshd 23396 root 2 0 832K 864K idle select 0:11 0.00% sshd 24835 root 2 0 1760K 1912K sleep select 0:00 0.00% sendmail 2362 root 2 0 736K 0K idle select 0:02 0.00% sshd 18904 root 10 0 1992K 672K idle wait 0:01 0.00% bash 2455 root 10 0 1992K 816K sleep wait 0:01 0.00% bash 1758 root 2 0 328K 688K idle select 0:00 0.00% cron 17119 root 2 0 176K 640K sleep select 0:00 0.00% syslogd 17210 root 2 0 144K 624K idle select 0:00 0.00% inetd 1 root 10 0 656K 104K idle wait 0:00 0.00% init 19709 root 2 0 800K 424K idle poll 0:00 0.00% dhclient 31498 root 10 0 264K 1088K idle wait 0:00 0.00% gcc 1579 root 3 0 72K 0K idle ttyin 0:00 0.00% getty Dmesg of ultra-5 Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2002 OpenBSD. All rights reserved. http://www.OpenBSD.org OpenBSD 3.2 (GENERIC) #8: Thu Oct 3 20:00:17 MDT 2002 [EMAIL PROTECTED]:/usr/src/sys/arch/sparc64/compile/GENERIC total memory = 268435456 avail memory = 240558080 using 1638 buffers containing 13418496 of memory bootpath: /pci@1f,0/pci@1,1/ide@3,0/disk@0,0 mainbus0 (root): SUNW,Ultra-5_10 cpu0 at mainbus0: SUNW,UltraSPARC-IIi @ 333 MHz, version 0 FPU cpu0: physical 32K instruction (32 b/l), 16K data (32 b/l), 2048K external (64 b/l) psycho0 at mainbus0 addr 0xfffc4000 SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 2; PCI bus 0 IOTDB: f66000 to fe6000 pci0 at psycho0 ppb0 at pci0 dev 1 function 1 "Sun Simba PCI-PCI" rev 0x13 pci1 at ppb0 bus 1 ebus0 at pci1 dev 1 function 0 "Sun PCIO Ebus2" rev 0x01 auxio0 at ebus0 addr 726000-726003, 728000-728003, 72a000-72a003, 72c000-72c003, 72f000-72f003 power at ebus0 addr 724000-724003 ipl 37 not configured SUNW,pll at ebus0 addr 504000-504002 not configured sab0 at ebus0 addr 400000-40007f ipl 43: rev 3.2 sabtty0 at sab0 port 0: console i/o sabtty1 at sab0 port 1 comkbd0 at ebus0 addr 3083f8-3083ff ipl 41 wskbd0 at comkbd0 com0 at ebus0 addr 3062f8-3062ff ipl 42, mouse: ns16550a, 16 byte fifo lpt0 at ebus0 addr 3043bc-3043cb, 30015c-30015d, 700000-70000f ipl 34: polled fdthree at ebus0 addr 3023f0-3023f7, 706000-70600f, 720000-720003 ipl 39 not configured clock0 at ebus0 addr 0-1fff: mk48t59: hostid 80a73606 flashprom at ebus0 addr 0-fffff not configured audioce0 at ebus0 addr 200000-2000ff, 702000-70200f, 704000-70400f, 722000-722003 ipl 35 ipl 36: nvaddrs 0 audio0 at audioce0 hme0 at pci1 dev 1 function 1 "Sun HME" rev 0x01: address 08:00:20:a7:36:06 nsphy0 at hme0 phy 1: DP83840 10/100 media interface, rev. 1 hme0: using ivec 3021 for interrupt vgafb0 at pci1 dev 2 function 0 "ATI Mach64 GP" rev 0x5c wsdisplay0 at vgafb0 wsdisplay0: screen 0 added (sun, sun emulation) pciide0 at pci1 dev 3 function 0 "CMD Technology PCI0646" rev 0x03: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide0: using ivec 1820 for native-PCI interrupt wd0 at pciide0 channel 0 drive 0: <ST39140A> wd0: 16-sector PIO, LBA, 8693MB, 17662 cyl, 16 head, 63 sec, 17803440 sectors wd0(pciide0:0:0): using PIO mode 4, DMA mode 2 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <LG, CD-ROM CRD-8322B, 1.03> SCSI0 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 ppb1 at pci0 dev 1 function 0 "Sun Simba PCI-PCI" rev 0x13 pci2 at ppb1 bus 2 gem0 at pci2 dev 1 function 0 "Sun GEM" rev 0x01 gem0: address 08:00:20:9e:a6:bb gem0: using ivec 3010 for interrupt pcons at mainbus0 not configured No counter-timer -- using %tick at 333MHz as system clock. root on wd0a rootdev=0xc00 rrootdev=0x1a00 rawdev=0x1a02 ------------------------------------------------------------------------ -- Edit this bug report at http://bugs.php.net/?id=22077&edit=1