Thank you very much Siarhei, I am still building something huge and had no way to double check but at least I can confirm the gcc is 4.9.2.
I will try to --disable-arm-iwmmxt when it shows arm6l as uname -m and let you know if that fixed. Do you think it should be enabled in the future or it's needed to let pixman properly work? Cheers On Wed, Dec 3, 2014 at 12:50 PM, Siarhei Siamashka < siarhei.siamas...@gmail.com> wrote: > On Tue, 2 Dec 2014 07:53:38 +0200 > Siarhei Siamashka <siarhei.siamas...@gmail.com> wrote: > > > On Mon, 1 Dec 2014 23:46:43 +0000 > > Andrea Giammarchi <andrea.giammar...@gmail.com> wrote: > > > > > On Mon, Dec 1, 2014 at 8:48 PM, Siarhei Siamashka < > > > siarhei.siamas...@gmail.com> wrote: > > > > > > > On Mon, 1 Dec 2014 10:12:05 +0000 > > > > Andrea Giammarchi <andrea.giammar...@gmail.com> wrote: > > > > > > > > > Hello there, > > > > > I wonder if anyone else ever tried to build directly on the R-Pi > > > > without > > > > > reaching the (in)famous "Max. number of generated reload insns per > insn > > > > is > > > > > achieved (90)" point. > > > > > > > > > > I can build just fine with same dependencies and OS ( Arch Linux ) > > > > > everywhere else but in the ARM v6 hf I keep having troubles. > > > > > > > > > > I know this error is usually a GCC one and I am not sure I should > even > > > > > bother here, but from mesa to cairo, including varius xorg, pixman > is the > > > > > only one that never manages to complete its build. > > > > > > > > > > Will try eventually a stable branch instead of latest from master > and let > > > > > you know. > > > > > > > > > > Thanks for any outcome ( if any, thanks for pixman otherwise > anyway ) > > > > > > > > I have just tested building the current pixman master branch on an > > > > ARM board with GCC 4.8.3. It compiled fine and passed the 'make > check' > > > > tests. The native and crosscompiled builds of pixman should generally > > > > work fine on ARM. > > > > > > > > First of all, you can probably try to ensure that the compiler is not > > > > running out of memory and maybe enable a large swap. Raspberry Pi > > > > does not have much RAM. > > > > > > > > Also pixman uses deep inlining and somewhat complicated code > constructs > > > > in some places. And it has triggered a number of compiler bugs in the > > > > past. Especially with the unstable/experimental dot-zero versions of > > > > compilers. In such cases, we typically report problems to GCC/Clang > > > > developers and the problems tend to be addressed relatively fast. > > > > Tools like C-Reduce can be used for finding a smaller testcase when > > > > debugging internal compiler error problems: > > > > http://embed.cs.utah.edu/creduce/ > > > > > > Thanks Siarhei, > > > I have 4GB /swap that made me build even QtWebEngine ( blink + v8 ... > > > basically 2/3rd of Chromium ) so I'd say that both linker ( ld.gold by > > > default ) and swap should be fine but I actually don't have right now > exact > > > version of the GCC used in Arch Linux but usually it's the latest one. > > > > > > I also can build pixman in ARM v7 hf boards but I could not manage yet > in > > > the R-Pi model B > > > > > > I will try to see if I can use C-Reduce so thanks for your hint but if > you > > > have anything else in mind that could cause pixman only to fail please > > > share ( at some point I thought it was about NEON which is not > supported in > > > the PI ... I haven't disabled that during build time, might try doing > that > > > and fingers crossed! ) > > > > BTW, if your Raspberry Pi happens to be overclocked, then it might be a > > potential source of reliability problems too. > > > > Running "gcc -v" should provide information about the GCC version and > > its configuration. > > > > NEON code is unlikely to cause problems because most of it is > > implemented in assembly language, so the C compiler is not used > > for it and can't fail. > > Actually I have managed to reproduce something similar with the > following toolchain generated by the gentoo crossdev tool: > > $ arm-test-linux-gnueabi-gcc -v > Using built-in specs. > > COLLECT_GCC=/usr/x86_64-pc-linux-gnu/arm-test-linux-gnueabi/gcc-bin/4.9.1/arm-test-linux-gnueabi-gcc > > COLLECT_LTO_WRAPPER=/usr/libexec/gcc/arm-test-linux-gnueabi/4.9.1/lto-wrapper > Target: arm-test-linux-gnueabi > Configured > with: > /var/tmp/portage/cross-arm-test-linux-gnueabi/gcc-4.9.1/work/gcc-4.9.1/configure > --host=x86_64-pc-linux-gnu --target=arm-test-linux-gnueabi > --build=x86_64-pc-linux-gnu --prefix=/usr > --bindir=/usr/x86_64-pc-linux-gnu/arm-test-linux-gnueabi/gcc-bin/4.9.1 > --includedir=/usr/lib/gcc/arm-test-linux-gnueabi/4.9.1/include > --datadir=/usr/share/gcc-data/arm-test-linux-gnueabi/4.9.1 > --mandir=/usr/share/gcc-data/arm-test-linux-gnueabi/4.9.1/man > --infodir=/usr/share/gcc-data/arm-test-linux-gnueabi/4.9.1/info > > --with-gxx-include-dir=/usr/lib/gcc/arm-test-linux-gnueabi/4.9.1/include/g++-v4 > --with-python-dir=/share/gcc-data/arm-test-linux-gnueabi/4.9.1/python > --enable-languages=c,c++ --enable-obsolete --enable-secureplt > --disable-werror --with-system-zlib --disable-nls > --enable-checking=release --with-bugurl=https://bugs.gentoo.org/ > --with-pkgversion='Gentoo 4.9.1 p1.0, pie-0.6.0' > --enable-libstdcxx-time --enable-poison-system-directories > --with-sysroot=/usr/arm-test-linux-gnueabi --disable-bootstrap > --enable-__cxa_atexit --enable-clocale=gnu --disable-multilib > --disable-altivec --disable-fixed-point --disable-libgcj > --disable-libgomp --disable-libmudflap --disable-libssp > --disable-libquadmath --enable-lto --without-cloog > --enable-libsanitizer --with-cpu=cortex-a8 --with-float=hard Thread > model: posix gcc version 4.9.1 (Gentoo 4.9.1 p1.0, pie-0.6.0) > > > It fails to compile the pixman mmx (arm-iwmmxt) code: > > CC libpixman_iwmmxt_la-pixman-mmx.lo > pixman-mmx.c: In function 'mmx_fetch_x8r8g8b8': > pixman-mmx.c:3911:1: internal compiler error: Max. number of generated > reload insns per insn is achieved (90) > > } > ^ > Please submit a full bug report, > with preprocessed source if appropriate. > See <https://bugs.gentoo.org/> for instructions. > Makefile:1111: recipe for target 'libpixman_iwmmxt_la-pixman-mmx.lo' failed > > > If that's what you get, then the workaround is simple. You can > run the configure script with "--disable-arm-iwmmxt" option. > > -- > Best regards, > Siarhei Siamashka >
_______________________________________________ Pixman mailing list Pixman@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/pixman
