Your message dated Wed, 30 Mar 2016 21:11:15 +0200
with message-id <[email protected]>
and subject line Re: Bug#819485: routino: At airports routino often can not
find the route.
has caused the Debian Bug report #819485,
regarding routino: At airports routino often can not find the route.
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
819485: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=819485
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: routino
Version: 3.1.1-2
Severity: normal
At airports routino often can not find the route. Reproduce:
1. Open http://www.routino.org/uk-leaflet/router.html
2. Set point "1": -0.44628 E / 51.45842 N
3. Set point "2": any. For example: -0.43684 E / 51.45502 N
4. Click "Shortest Route"
5. Get:
router --shortest --speed-unclassified=64 --speed-tertiary=80
--highway-tertiary=70 --highway-track=0 --lon1=-0.44628
--speed-motorway=112 --speed-primary=96 --speed-track=16 --turns=1
--highway-ferry=20 --highway-cycleway=0 --property-footroute=45
--transport=motorcar --highway-primary=90 --highway-unclassified=60
--speed-cycleway=0 --highway-trunk=100 --property-tunnel=50
--property-multilane=60 --speed-ferry=10 --highway-service=40
--speed-service=32 --property-bridge=50 --loop= --length=0
--lat2=51.45572 --highway-path=0 --speed-residential=48 --lon2=-0.43636
--highway-motorway=100 --highway-steps=0 --speed-path=0 --width=0
--oneway=1 --weight=0 --speed-steps=0 --speed-secondary=88 --reverse=
--highway-residential=50 --property-paved=100 --speed-trunk=96
--highway-secondary=80 --property-bicycleroute=45 --lat1=51.45842
--height=0 --dir=routino-data
Loaded Files: nodes, segments, ways & relations
Found Closest Point: Waypoint 1
Waypoint 1 is node 10966453: -0.446248 51.458374 = 0.003 km
Found Closest Point: Waypoint 2
Waypoint 2 is segment 13674333 (node 10967217 -> 10967267): -0.436377
51.455728 = 0.000 km
Routing from waypoint 1 to waypoint 2
Found Start Route: Nodes checked = 4 - Fail
Error: Cannot find initial section of route compatible with profile.
Time: 0.000 CPU / 0.016 elapsed
I see this bug in many airports. I think this may be due to:
1. One way. Disable "Obey oneway streets" checkbox. Then the route will
be found.
2. This roads has tag "highway"="service".
P.S. I try to send bug to upstream author but not get feedback. I hope
mainteiners has connection with upstream.
-- System Information:
Debian Release: 8.3
APT prefers stable
APT policy: (990, 'stable'), (500, 'testing-updates'), (500,
'testing-proposed-updates'), (500, 'stable-updates'), (500,
'proposed-updates'), (500, 'unstable'), (500, 'testing'), (500, 'oldstable'),
(1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 4.2.0-1-amd64 (SMP w/8 CPU cores)
Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages routino depends on:
ii libbz2-1.0 1.0.6-7+b3
ii libc6 2.19-18+deb8u3
ii libroutino-slim0 3.1.1-2
ii libroutino0 3.1.1-2
ii routino-common 3.1.1-2
ii zlib1g 1:1.2.8.dfsg-2+b1
routino recommends no packages.
routino suggests no packages.
-- debconf-show failed
--- End Message ---
--- Begin Message ---
Hi Andrew,
Thanks for the feedback on this issue too.
On 03/30/2016 08:18 PM, Andrew M. Bishop wrote:
>>> Package: routino
>>> Version: 3.1.1-2
>>> Severity: normal
>>>
>>> At airports routino often can not find the route. Reproduce:
>>>
>>> 1. Open http://www.routino.org/uk-leaflet/router.html
>>> 2. Set point "1": -0.44628 E / 51.45842 N
>>> 3. Set point "2": any. For example: -0.43684 E / 51.45502 N
>>> 4. Click "Shortest Route"
>>> 5. Get:
>
>>> Loaded Files: nodes, segments, ways & relations
>>> Found Closest Point: Waypoint 1
>>> Waypoint 1 is node 10966453: -0.446248 51.458374 = 0.003 km
>>> Found Closest Point: Waypoint 2
>>> Waypoint 2 is segment 13674333 (node 10967217 -> 10967267): -0.436377
>>> 51.455728 = 0.000 km
>>> Routing from waypoint 1 to waypoint 2
>>> Found Start Route: Nodes checked = 4 - Fail
>>> Error: Cannot find initial section of route compatible with profile.
>
> This is not a Routino bug, it is a bug in the Openstreetmap data that
> Routino is using.
>
> The road that has been selected for the start point is marked as
> one-way and is a dead-end. If you follow the road (in the only
> direction allowed) you will come to the end where you can go no
> further.
>
> You can see this more easily in this zoomed in map:
>
> http://www.openstreetmap.org/#map=18/51.45887/-0.44572
>
> Routino cannot calculate a route where there is no viable road.
>
>
> It could be argued that Routino should remove one-way highways that
> lead into a dead-end and one-way highways that start from a dead-end
> but that is a feature request, not a bug. Routino does make efforts
> to remove highways that cannot be used for routing but one-way
> highways like this are not included.
Based on both the issues Roman reported, the general advice seems to be
to select the waypoints carefully to help Routino find the ways between
them.
I'll close this issue too, as it's not something that can be fixed in
the routino package.
Thanks again for the quick feedback.
Kind Regards,
Bas
--
GPG Key ID: 4096R/6750F10AE88D4AF1
Fingerprint: 8182 DE41 7056 408D 6146 50D1 6750 F10A E88D 4AF1
--- End Message ---
_______________________________________________
Pkg-grass-devel mailing list
[email protected]
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/pkg-grass-devel
