Package: pulseaudio
Version: 12.99.2-1
Severity: normal
After upgrading to 12.99.2-1, pulseaudio no longer recognizes USB audio
devices, even though ALSA sees them correctly. It is possible to
manually add a USB audio device after pulseaudio has started, by running
"pactl load-module module-alsa-sink device=hw:X", but this is of course
sub-optimal. Downgrading pulseaudio to version 12.2-4 from Buster fixes
the issue.
Output of "aplay -l | grep card":
card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
card 0: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
card 0: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2]
card 0: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3]
card 1: Generic [HD-Audio Generic], device 0: ALC1220 Analog [ALC1220 Analog]
card 1: Generic [HD-Audio Generic], device 1: ALC1220 Digital [ALC1220 Digital]
card 2: S7 [SteelSeries Arctis 7], device 0: USB Audio [USB Audio]
card 2: S7 [SteelSeries Arctis 7], device 1: USB Audio [USB Audio #1]
card 3: Microphone [Yeti Stereo Microphone], device 0: USB Audio [USB Audio]
Output of "pactl list short sinks" with pulseaudio 12.99.2-1:
0 alsa_output.pci-0000_09_00.1.hdmi-stereo-extra1 module-alsa-card.c
s16le 2ch 44100Hz IDLE
1 alsa_output.pci-0000_0b_00.4.analog-stereo module-alsa-card.c
s16le 2ch 44100Hz IDLE
Output of "pactl list short sinks" with pulseaudio 12.2-4:
0 alsa_output.pci-0000_09_00.1.hdmi-stereo-extra1 module-alsa-card.c
s16le 2ch 44100Hz IDLE
1 alsa_output.pci-0000_0b_00.4.analog-stereo module-alsa-card.c
s16le 2ch 44100Hz IDLE
2 alsa_output.usb-SteelSeries_SteelSeries_Arctis_7-00.analog-mono
module-alsa-card.c s16le 1ch 44100Hz IDLE
3 alsa_output.usb-SteelSeries_SteelSeries_Arctis_7-00.analog-stereo
module-alsa-card.c s16le 2ch 44100Hz IDLE
-- Package-specific info:
File '/etc/default/pulseaudio' does not exist
-- System Information:
Debian Release: bullseye/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'stable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 5.2.0-2-amd64 (SMP w/24 CPU cores)
Kernel taint flags: TAINT_PROPRIETARY_MODULE, TAINT_OOT_MODULE,
TAINT_UNSIGNED_MODULE
Locale: LANG=C.UTF-8, LC_CTYPE=C.UTF-8 (charmap=UTF-8), LANGUAGE=C.UTF-8
(charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages pulseaudio depends on:
ii adduser 3.118
ii init-system-helpers 1.57
ii libasound2 1.1.8-1
ii libasound2-plugins 1.1.8-1
ii libc6 2.28-10
ii libcap2 1:2.25-2
ii libdbus-1-3 1.12.16-1
ii libgcc1 1:9.2.1-4
ii libice6 2:1.0.9-2
ii libltdl7 2.4.6-10
ii liborc-0.4-0 1:0.4.28-3.1
ii libpulse0 12.99.2-1
ii libsm6 2:1.2.3-1
ii libsndfile1 1.0.28-6
ii libsoxr0 0.1.2-3
ii libspeexdsp1 1.2~rc1.2-1+b2
ii libstdc++6 9.2.1-4
ii libsystemd0 242-4
ii libtdb1 1.3.16-2+b1
ii libudev1 242-4
ii libwebrtc-audio-processing1 0.3-1+b1
ii libx11-6 2:1.6.7-1
ii libx11-xcb1 2:1.6.7-1
ii libxcb1 1.13.1-2
ii libxtst6 2:1.2.3-1
ii lsb-base 11.1.0
ii pulseaudio-utils 12.99.2-1
Versions of packages pulseaudio recommends:
ii dbus-user-session 1.12.16-1
ii libpam-systemd 242-4
ii rtkit 0.12-4
Versions of packages pulseaudio suggests:
pn paman <none>
pn paprefs <none>
ii pavucontrol 3.0-4
pn pavumeter <none>
ii udev 242-4
-- debconf-show failed
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
## Configuration file for PulseAudio clients. See pulse-client.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; default-sink =
; default-source =
; default-server =
; default-dbus-server =
; autospawn = yes
; daemon-binary = /usr/bin/pulseaudio
; extra-arguments = --log-target=syslog
; cookie-file =
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64
MiB
; auto-connect-localhost = no
; auto-connect-display = no
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; daemonize = no
; fail = yes
; allow-module-loading = yes
; allow-exit = yes
; use-pid-file = yes
; system-instance = no
; local-server-type = user
; enable-shm = yes
; enable-memfd = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64
MiB
; lock-memory = no
; cpu-limit = no
; high-priority = yes
; nice-level = -11
; realtime-scheduling = yes
; realtime-priority = 5
; exit-idle-time = 20
; scache-idle-time = 20
; dl-search-path = (depends on architecture)
; load-default-script-file = yes
; default-script-file = /etc/pulse/default.pa
; log-target = auto
; log-level = notice
; log-meta = no
; log-time = no
; log-backtrace = 0
; resample-method = speex-float-1
; avoid-resampling = false
; enable-remixing = yes
; remixing-use-all-sink-channels = yes
; enable-lfe-remixing = no
; lfe-crossover-freq = 0
; flat-volumes = yes
; rlimit-fsize = -1
; rlimit-data = -1
; rlimit-stack = -1
; rlimit-core = -1
; rlimit-as = -1
; rlimit-rss = -1
; rlimit-nproc = -1
; rlimit-nofile = 256
; rlimit-memlock = -1
; rlimit-locks = -1
; rlimit-sigpending = -1
; rlimit-msgqueue = -1
; rlimit-nice = 31
; rlimit-rtprio = 9
; rlimit-rttime = 200000
; default-sample-format = s16le
; default-sample-rate = 44100
; alternate-sample-rate = 48000
; default-sample-channels = 2
; default-channel-map = front-left,front-right
; default-fragments = 4
; default-fragment-size-msec = 25
; enable-deferred-volume = yes
; deferred-volume-safety-margin-usec = 8000
; deferred-volume-extra-delay-usec = 0
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
# This startup script is used only if PulseAudio is started per-user
# (i.e. not in system mode)
.fail
### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
### Automatically augment property information from .desktop files
### stored in /usr/share/application
load-module module-augment-properties
### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available
### Load audio drivers statically
### (it's probably better to not load these drivers manually, but instead
### use module-udev-detect -- see below -- for doing this automatically)
#load-module module-alsa-sink
#load-module module-alsa-source device=hw:1,0
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output
source_name=input
#load-module module-null-sink
#load-module module-pipe-sink
### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev
support)
load-module module-detect
.endif
### Automatically connect sink and source if JACK server is present
.ifexists module-jackdbus-detect.so
.nofail
load-module module-jackdbus-detect channels=2
.fail
.endif
### Automatically load driver modules for Bluetooth hardware
.ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
.endif
.ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
.endif
### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp
#load-module module-zeroconf-publish
### Load the RTP receiver module (also configured via paprefs, see above)
#load-module module-rtp-recv
### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100
sink_properties="device.description='RTP Multicast Sink'"
#load-module module-rtp-send source=rtp.monitor
### Load additional modules from GSettings. This can be configured with the
paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict
with manually
### loaded modules.
.ifexists module-gsettings.so
.nofail
load-module module-gsettings
.fail
.endif
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Honour intended role device property
load-module module-intended-roles
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### If autoexit on idle is enabled we want to make sure we only quit
### when no local session needs us anymore.
.ifexists module-console-kit.so
load-module module-console-kit
.endif
.ifexists module-systemd-login.so
load-module module-systemd-login
.endif
### Enable positioned event sounds
load-module module-position-event-sounds
### Cork music/video streams when a phone stream is active
load-module module-role-cork
### Modules to allow autoloading of filters (such as echo cancellation)
### on demand. module-filter-heuristics tries to determine what filters
### make sense, and module-filter-apply does the heavy-lifting of
### loading modules and rerouting streams.
load-module module-filter-heuristics
load-module module-filter-apply
### Make some devices default
#set-default-sink output
#set-default-source input
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
# This startup script is used only if PulseAudio is started in system
# mode.
### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev/hal
support)
load-module module-detect
.endif
### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### Enable positioned event sounds
load-module module-position-event-sounds
default
Playback/recording through the PulseAudio sound server
null
Discard all samples (playback) or generate zero samples (capture)
jack
JACK Audio Connection Kit
pulse
PulseAudio Sound Server
hdmi:CARD=NVidia,DEV=0
HDA NVidia, HDMI 0
HDMI Audio Output
hdmi:CARD=NVidia,DEV=1
HDA NVidia, HDMI 1
HDMI Audio Output
hdmi:CARD=NVidia,DEV=2
HDA NVidia, HDMI 2
HDMI Audio Output
hdmi:CARD=NVidia,DEV=3
HDA NVidia, HDMI 3
HDMI Audio Output
dmix:CARD=NVidia,DEV=3
HDA NVidia, HDMI 0
Direct sample mixing device
dmix:CARD=NVidia,DEV=7
HDA NVidia, HDMI 1
Direct sample mixing device
dmix:CARD=NVidia,DEV=8
HDA NVidia, HDMI 2
Direct sample mixing device
dmix:CARD=NVidia,DEV=9
HDA NVidia, HDMI 3
Direct sample mixing device
dsnoop:CARD=NVidia,DEV=3
HDA NVidia, HDMI 0
Direct sample snooping device
dsnoop:CARD=NVidia,DEV=7
HDA NVidia, HDMI 1
Direct sample snooping device
dsnoop:CARD=NVidia,DEV=8
HDA NVidia, HDMI 2
Direct sample snooping device
dsnoop:CARD=NVidia,DEV=9
HDA NVidia, HDMI 3
Direct sample snooping device
hw:CARD=NVidia,DEV=3
HDA NVidia, HDMI 0
Direct hardware device without any conversions
hw:CARD=NVidia,DEV=7
HDA NVidia, HDMI 1
Direct hardware device without any conversions
hw:CARD=NVidia,DEV=8
HDA NVidia, HDMI 2
Direct hardware device without any conversions
hw:CARD=NVidia,DEV=9
HDA NVidia, HDMI 3
Direct hardware device without any conversions
plughw:CARD=NVidia,DEV=3
HDA NVidia, HDMI 0
Hardware device with all software conversions
plughw:CARD=NVidia,DEV=7
HDA NVidia, HDMI 1
Hardware device with all software conversions
plughw:CARD=NVidia,DEV=8
HDA NVidia, HDMI 2
Hardware device with all software conversions
plughw:CARD=NVidia,DEV=9
HDA NVidia, HDMI 3
Hardware device with all software conversions
usbstream:CARD=NVidia
HDA NVidia
USB Stream Output
sysdefault:CARD=Generic
HD-Audio Generic, ALC1220 Analog
Default Audio Device
front:CARD=Generic,DEV=0
HD-Audio Generic, ALC1220 Analog
Front speakers
surround21:CARD=Generic,DEV=0
HD-Audio Generic, ALC1220 Analog
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=Generic,DEV=0
HD-Audio Generic, ALC1220 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=Generic,DEV=0
HD-Audio Generic, ALC1220 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Generic,DEV=0
HD-Audio Generic, ALC1220 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Generic,DEV=0
HD-Audio Generic, ALC1220 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Generic,DEV=0
HD-Audio Generic, ALC1220 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Generic,DEV=0
HD-Audio Generic, ALC1220 Digital
IEC958 (S/PDIF) Digital Audio Output
dmix:CARD=Generic,DEV=0
HD-Audio Generic, ALC1220 Analog
Direct sample mixing device
dmix:CARD=Generic,DEV=1
HD-Audio Generic, ALC1220 Digital
Direct sample mixing device
dsnoop:CARD=Generic,DEV=0
HD-Audio Generic, ALC1220 Analog
Direct sample snooping device
dsnoop:CARD=Generic,DEV=1
HD-Audio Generic, ALC1220 Digital
Direct sample snooping device
hw:CARD=Generic,DEV=0
HD-Audio Generic, ALC1220 Analog
Direct hardware device without any conversions
hw:CARD=Generic,DEV=1
HD-Audio Generic, ALC1220 Digital
Direct hardware device without any conversions
plughw:CARD=Generic,DEV=0
HD-Audio Generic, ALC1220 Analog
Hardware device with all software conversions
plughw:CARD=Generic,DEV=1
HD-Audio Generic, ALC1220 Digital
Hardware device with all software conversions
usbstream:CARD=Generic
HD-Audio Generic
USB Stream Output
sysdefault:CARD=S7
SteelSeries Arctis 7, USB Audio
Default Audio Device
front:CARD=S7,DEV=0
SteelSeries Arctis 7, USB Audio
Front speakers
surround21:CARD=S7,DEV=0
SteelSeries Arctis 7, USB Audio
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=S7,DEV=0
SteelSeries Arctis 7, USB Audio
4.0 Surround output to Front and Rear speakers
surround41:CARD=S7,DEV=0
SteelSeries Arctis 7, USB Audio
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=S7,DEV=0
SteelSeries Arctis 7, USB Audio
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=S7,DEV=0
SteelSeries Arctis 7, USB Audio
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=S7,DEV=0
SteelSeries Arctis 7, USB Audio
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=S7,DEV=0
SteelSeries Arctis 7, USB Audio
IEC958 (S/PDIF) Digital Audio Output
dmix:CARD=S7,DEV=0
SteelSeries Arctis 7, USB Audio
Direct sample mixing device
dmix:CARD=S7,DEV=1
SteelSeries Arctis 7, USB Audio #1
Direct sample mixing device
dsnoop:CARD=S7,DEV=0
SteelSeries Arctis 7, USB Audio
Direct sample snooping device
dsnoop:CARD=S7,DEV=1
SteelSeries Arctis 7, USB Audio #1
Direct sample snooping device
hw:CARD=S7,DEV=0
SteelSeries Arctis 7, USB Audio
Direct hardware device without any conversions
hw:CARD=S7,DEV=1
SteelSeries Arctis 7, USB Audio #1
Direct hardware device without any conversions
plughw:CARD=S7,DEV=0
SteelSeries Arctis 7, USB Audio
Hardware device with all software conversions
plughw:CARD=S7,DEV=1
SteelSeries Arctis 7, USB Audio #1
Hardware device with all software conversions
usbstream:CARD=S7
SteelSeries Arctis 7
USB Stream Output
sysdefault:CARD=Microphone
Yeti Stereo Microphone, USB Audio
Default Audio Device
front:CARD=Microphone,DEV=0
Yeti Stereo Microphone, USB Audio
Front speakers
surround21:CARD=Microphone,DEV=0
Yeti Stereo Microphone, USB Audio
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=Microphone,DEV=0
Yeti Stereo Microphone, USB Audio
4.0 Surround output to Front and Rear speakers
surround41:CARD=Microphone,DEV=0
Yeti Stereo Microphone, USB Audio
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Microphone,DEV=0
Yeti Stereo Microphone, USB Audio
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Microphone,DEV=0
Yeti Stereo Microphone, USB Audio
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Microphone,DEV=0
Yeti Stereo Microphone, USB Audio
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Microphone,DEV=0
Yeti Stereo Microphone, USB Audio
IEC958 (S/PDIF) Digital Audio Output
dmix:CARD=Microphone,DEV=0
Yeti Stereo Microphone, USB Audio
Direct sample mixing device
dsnoop:CARD=Microphone,DEV=0
Yeti Stereo Microphone, USB Audio
Direct sample snooping device
hw:CARD=Microphone,DEV=0
Yeti Stereo Microphone, USB Audio
Direct hardware device without any conversions
plughw:CARD=Microphone,DEV=0
Yeti Stereo Microphone, USB Audio
Hardware device with all software conversions
usbstream:CARD=Microphone
Yeti Stereo Microphone
USB Stream Output
Module #0
Name: module-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute
state of devices"
module.version = "12.99.2"
Module #1
Name: module-stream-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the
volume/mute/device state of streams"
module.version = "12.99.2"
Module #2
Name: module-card-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "12.99.2"
Module #3
Name: module-augment-properties
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with
additional static information"
module.version = "12.99.2"
Module #4
Name: module-switch-on-port-available
Argument:
Usage counter: n/a
Properties:
module.author = "David Henningsson"
module.description = "Switches ports and profiles when devices
are plugged/unplugged"
module.version = "12.99.2"
Module #5
Name: module-udev-detect
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Detect available audio hardware and load
matching drivers"
module.version = "12.99.2"
Module #6
Name: module-alsa-card
Argument: device_id="3"
name="usb-Blue_Microphones_Yeti_Stereo_Microphone_797_2017_12_18_25487-00"
card_name="alsa_card.usb-Blue_Microphones_Yeti_Stereo_Microphone_797_2017_12_18_25487-00"
namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no
deferred_volume=yes use_ucm=yes avoid_resampling=no
card_properties="module-udev-detect.discovered=1"
Usage counter: 1
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "12.99.2"
Module #7
Name: module-alsa-card
Argument: device_id="0" name="pci-0000_09_00.1"
card_name="alsa_card.pci-0000_09_00.1" namereg_fail=false tsched=yes
fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes
avoid_resampling=no card_properties="module-udev-detect.discovered=1"
Usage counter: 2
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "12.99.2"
Module #9
Name: module-alsa-card
Argument: device_id="1" name="pci-0000_0b_00.4"
card_name="alsa_card.pci-0000_0b_00.4" namereg_fail=false tsched=yes
fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes
avoid_resampling=no card_properties="module-udev-detect.discovered=1"
Usage counter: 2
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "12.99.2"
Module #10
Name: module-native-protocol-unix
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Native protocol (UNIX sockets)"
module.version = "12.99.2"
Module #11
Name: module-default-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the default sink
and source"
module.version = "12.99.2"
Module #12
Name: module-rescue-streams
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is removed, try to
move its streams to the default sink/source"
module.version = "12.99.2"
Module #13
Name: module-always-sink
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Houdt altijd ten minste een afvoer
ingeladen zelfs als het de null-afvoer is."
module.version = "12.99.2"
Module #14
Name: module-intended-roles
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically set device of streams based
on intended roles of devices"
module.version = "12.99.2"
Module #15
Name: module-suspend-on-idle
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is idle for too long,
suspend it"
module.version = "12.99.2"
Module #16
Name: module-console-kit
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each ConsoleKit
session of this user"
module.version = "12.99.2"
Module #17
Name: module-systemd-login
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each login session of
this user"
module.version = "12.99.2"
Module #18
Name: module-position-event-sounds
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Position event sounds between L and R
depending on the position on screen of the widget triggering them."
module.version = "12.99.2"
Module #19
Name: module-role-cork
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Mute & cork streams with certain roles
while others exist"
module.version = "12.99.2"
Module #20
Name: module-filter-heuristics
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Detect when various filters are desirable"
module.version = "12.99.2"
Module #21
Name: module-filter-apply
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Load filter sinks automatically when
needed"
module.version = "12.99.2"
Module #22
Name: module-alsa-card
Argument: device_id="2" name="usb-SteelSeries_SteelSeries_Arctis_7-00"
card_name="alsa_card.usb-SteelSeries_SteelSeries_Arctis_7-00"
namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no
deferred_volume=yes use_ucm=yes avoid_resampling=no
card_properties="module-udev-detect.discovered=1"
Usage counter: 5
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "12.99.2"
Sink #0
State: IDLE
Name: alsa_output.pci-0000_09_00.1.hdmi-stereo-extra1
Description: TU102 High Definition Audio Controller Digital Stereo
(HDMI 2)
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 7
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100%
/ 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.pci-0000_09_00.1.hdmi-stereo-extra1.monitor
Latency: 39994 usec, configured 40000 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY SET_FORMATS
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "HDMI 1"
alsa.id = "HDMI 1"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "7"
alsa.card = "0"
alsa.card_name = "HDA NVidia"
alsa.long_card_name = "HDA NVidia at 0xf7080000 irq 110"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:09:00.1"
sysfs.path =
"/devices/pci0000:00/0000:00:03.1/0000:09:00.1/sound/card0"
device.bus = "pci"
device.vendor.id = "10de"
device.vendor.name = "NVIDIA Corporation"
device.product.id = "10f7"
device.product.name = "TU102 High Definition Audio Controller"
device.string = "hdmi:0,1"
device.buffering.buffer_size = "352768"
device.buffering.fragment_size = "176384"
device.access_mode = "mmap+timer"
device.profile.name = "hdmi-stereo-extra1"
device.profile.description = "Digital Stereo (HDMI 2)"
device.description = "TU102 High Definition Audio Controller
Digital Stereo (HDMI 2)"
alsa.mixer_name = "Nvidia GPU 91 HDMI/DP"
alsa.components = "HDA:10de0091,1043866a,00100100"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports:
hdmi-output-1: HDMI / DisplayPort 2 (priority: 5800, available)
Active Port: hdmi-output-1
Formats:
pcm
Sink #1
State: IDLE
Name: alsa_output.pci-0000_0b_00.4.analog-stereo
Description: Starship/Matisse HD Audio Controller Analoog stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 9
Mute: no
Volume: front-left: 13076 / 20% / -42.00 dB, front-right: 13076 /
20% / -42.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.pci-0000_0b_00.4.analog-stereo.monitor
Latency: 33411 usec, configured 40000 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC1220 Analog"
alsa.id = "ALC1220 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xf7a00000 irq 112"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:0b:00.4"
sysfs.path =
"/devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1"
device.bus = "pci"
device.vendor.id = "1022"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
device.product.id = "1487"
device.product.name = "Starship/Matisse HD Audio Controller"
device.string = "front:1"
device.buffering.buffer_size = "352768"
device.buffering.fragment_size = "176384"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analoog stereo"
device.description = "Starship/Matisse HD Audio Controller
Analoog stereo"
alsa.mixer_name = "Realtek ALC1220"
alsa.components = "HDA:10ec1168,10438733,00100101"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports:
analog-output-lineout: Line Out (priority: 9000, available)
analog-output-headphones: Analoge koptelefoon (priority: 9900,
not available)
Active Port: analog-output-lineout
Formats:
pcm
Sink #2
State: IDLE
Name: alsa_output.usb-SteelSeries_SteelSeries_Arctis_7-00.analog-mono
Description: SteelSeries Arctis 7 Analoog mono
Driver: module-alsa-card.c
Sample Specification: s16le 1ch 44100Hz
Channel Map: mono
Owner Module: 22
Mute: no
Volume: mono: 16462 / 25% / -36.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source:
alsa_output.usb-SteelSeries_SteelSeries_Arctis_7-00.analog-mono.monitor
Latency: 46022 usec, configured 40000 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio"
alsa.id = "USB Audio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "2"
alsa.card_name = "SteelSeries Arctis 7"
alsa.long_card_name = "SteelSeries SteelSeries Arctis 7 at
usb-0000:0b:00.3-3, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:0b:00.3-usb-0:3:1.0"
sysfs.path =
"/devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb9/9-3/9-3:1.0/sound/card2"
udev.id = "usb-SteelSeries_SteelSeries_Arctis_7-00"
device.bus = "usb"
device.vendor.id = "1038"
device.vendor.name = "SteelSeries ApS"
device.product.id = "12ad"
device.product.name = "SteelSeries Arctis 7"
device.serial = "SteelSeries_SteelSeries_Arctis_7"
device.string = "hw:2,0,0"
device.buffering.buffer_size = "176400"
device.buffering.fragment_size = "88200"
device.access_mode = "mmap+timer"
device.profile.name = "analog-mono"
device.profile.description = "Analoog mono"
device.description = "SteelSeries Arctis 7 Analoog mono"
alsa.mixer_name = "USB Mixer"
alsa.components = "USB1038:12ad"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
Ports:
steelseries-arctis-output-mono: Headphones Mono Output
(priority: 0)
Active Port: steelseries-arctis-output-mono
Formats:
pcm
Sink #3
State: IDLE
Name: alsa_output.usb-SteelSeries_SteelSeries_Arctis_7-00.analog-stereo
Description: SteelSeries Arctis 7 Analoog stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 22
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100%
/ 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source:
alsa_output.usb-SteelSeries_SteelSeries_Arctis_7-00.analog-stereo.monitor
Latency: 44135 usec, configured 40000 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio #1"
alsa.id = "USB Audio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "1"
alsa.card = "2"
alsa.card_name = "SteelSeries Arctis 7"
alsa.long_card_name = "SteelSeries SteelSeries Arctis 7 at
usb-0000:0b:00.3-3, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:0b:00.3-usb-0:3:1.0"
sysfs.path =
"/devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb9/9-3/9-3:1.0/sound/card2"
udev.id = "usb-SteelSeries_SteelSeries_Arctis_7-00"
device.bus = "usb"
device.vendor.id = "1038"
device.vendor.name = "SteelSeries ApS"
device.product.id = "12ad"
device.product.name = "SteelSeries Arctis 7"
device.serial = "SteelSeries_SteelSeries_Arctis_7"
device.string = "hw:2,1,0"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analoog stereo"
device.description = "SteelSeries Arctis 7 Analoog stereo"
alsa.mixer_name = "USB Mixer"
alsa.components = "USB1038:12ad"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
Ports:
steelseries-arctis-output-stereo: Analoge koptelefoon
(priority: 0)
Active Port: steelseries-arctis-output-stereo
Formats:
pcm
Source #0
State: RUNNING
Name:
alsa_input.usb-Blue_Microphones_Yeti_Stereo_Microphone_797_2017_12_18_25487-00.analog-stereo
Description: Yeti Stereo Microphone Analoog stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 6
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100%
/ 0.00 dB
balance 0.00
Base Volume: 38295 / 58% / -14.00 dB
Monitor of Sink: n/a
Latency: 2477 usec, configured 40000 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio"
alsa.id = "USB Audio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "3"
alsa.card_name = "Yeti Stereo Microphone"
alsa.long_card_name = "Blue Microphones Yeti Stereo Microphone
at usb-0000:06:00.1-1, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:06:00.1-usb-0:1:1.0"
sysfs.path =
"/devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:06:00.1/usb3/3-1/3-1:1.0/sound/card3"
udev.id =
"usb-Blue_Microphones_Yeti_Stereo_Microphone_797_2017_12_18_25487-00"
device.bus = "usb"
device.vendor.id = "b58e"
device.vendor.name = "Blue Microphones"
device.product.id = "9e84"
device.product.name = "Yeti Stereo Microphone"
device.serial =
"Blue_Microphones_Yeti_Stereo_Microphone_797_2017_12_18_25487"
device.form_factor = "microphone"
device.string = "front:3"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analoog stereo"
device.description = "Yeti Stereo Microphone Analoog stereo"
alsa.mixer_name = "USB Mixer"
alsa.components = "USBb58e:9e84"
module-udev-detect.discovered = "1"
device.icon_name = "audio-input-microphone-usb"
Ports:
analog-input-mic: Microfoon (priority: 8700)
Active Port: analog-input-mic
Formats:
pcm
Source #1
State: RUNNING
Name: alsa_output.pci-0000_09_00.1.hdmi-stereo-extra1.monitor
Description: Monitor of TU102 High Definition Audio Controller Digital
Stereo (HDMI 2)
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 7
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100%
/ 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.pci-0000_09_00.1.hdmi-stereo-extra1
Latency: 0 usec, configured 40000 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of TU102 High Definition Audio
Controller Digital Stereo (HDMI 2)"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "HDA NVidia"
alsa.long_card_name = "HDA NVidia at 0xf7080000 irq 110"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:09:00.1"
sysfs.path =
"/devices/pci0000:00/0000:00:03.1/0000:09:00.1/sound/card0"
device.bus = "pci"
device.vendor.id = "10de"
device.vendor.name = "NVIDIA Corporation"
device.product.id = "10f7"
device.product.name = "TU102 High Definition Audio Controller"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Formats:
pcm
Source #2
State: RUNNING
Name: alsa_output.pci-0000_0b_00.4.analog-stereo.monitor
Description: Monitor of Starship/Matisse HD Audio Controller Analoog
stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 9
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100%
/ 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.pci-0000_0b_00.4.analog-stereo
Latency: 0 usec, configured 40000 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of Starship/Matisse HD Audio
Controller Analoog stereo"
device.class = "monitor"
alsa.card = "1"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xf7a00000 irq 112"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:0b:00.4"
sysfs.path =
"/devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1"
device.bus = "pci"
device.vendor.id = "1022"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
device.product.id = "1487"
device.product.name = "Starship/Matisse HD Audio Controller"
device.string = "1"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Formats:
pcm
Source #3
State: RUNNING
Name:
alsa_output.usb-SteelSeries_SteelSeries_Arctis_7-00.analog-mono.monitor
Description: Monitor of SteelSeries Arctis 7 Analoog mono
Driver: module-alsa-card.c
Sample Specification: s16le 1ch 44100Hz
Channel Map: mono
Owner Module: 22
Mute: no
Volume: mono: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink:
alsa_output.usb-SteelSeries_SteelSeries_Arctis_7-00.analog-mono
Latency: 0 usec, configured 40000 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of SteelSeries Arctis 7 Analoog
mono"
device.class = "monitor"
alsa.card = "2"
alsa.card_name = "SteelSeries Arctis 7"
alsa.long_card_name = "SteelSeries SteelSeries Arctis 7 at
usb-0000:0b:00.3-3, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:0b:00.3-usb-0:3:1.0"
sysfs.path =
"/devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb9/9-3/9-3:1.0/sound/card2"
udev.id = "usb-SteelSeries_SteelSeries_Arctis_7-00"
device.bus = "usb"
device.vendor.id = "1038"
device.vendor.name = "SteelSeries ApS"
device.product.id = "12ad"
device.product.name = "SteelSeries Arctis 7"
device.serial = "SteelSeries_SteelSeries_Arctis_7"
device.string = "2"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
Formats:
pcm
Source #4
State: RUNNING
Name:
alsa_output.usb-SteelSeries_SteelSeries_Arctis_7-00.analog-stereo.monitor
Description: Monitor of SteelSeries Arctis 7 Analoog stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 22
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100%
/ 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink:
alsa_output.usb-SteelSeries_SteelSeries_Arctis_7-00.analog-stereo
Latency: 0 usec, configured 40000 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of SteelSeries Arctis 7 Analoog
stereo"
device.class = "monitor"
alsa.card = "2"
alsa.card_name = "SteelSeries Arctis 7"
alsa.long_card_name = "SteelSeries SteelSeries Arctis 7 at
usb-0000:0b:00.3-3, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:0b:00.3-usb-0:3:1.0"
sysfs.path =
"/devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb9/9-3/9-3:1.0/sound/card2"
udev.id = "usb-SteelSeries_SteelSeries_Arctis_7-00"
device.bus = "usb"
device.vendor.id = "1038"
device.vendor.name = "SteelSeries ApS"
device.product.id = "12ad"
device.product.name = "SteelSeries Arctis 7"
device.serial = "SteelSeries_SteelSeries_Arctis_7"
device.string = "2"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
Formats:
pcm
Source #5
State: RUNNING
Name: alsa_input.usb-SteelSeries_SteelSeries_Arctis_7-00.analog-mono
Description: SteelSeries Arctis 7 Analoog mono
Driver: module-alsa-card.c
Sample Specification: s16le 1ch 44100Hz
Channel Map: mono
Owner Module: 22
Mute: no
Volume: mono: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 52057 / 79% / -6.00 dB
Monitor of Sink: n/a
Latency: 0 usec, configured 40000 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio"
alsa.id = "USB Audio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "2"
alsa.card_name = "SteelSeries Arctis 7"
alsa.long_card_name = "SteelSeries SteelSeries Arctis 7 at
usb-0000:0b:00.3-3, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:0b:00.3-usb-0:3:1.0"
sysfs.path =
"/devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb9/9-3/9-3:1.0/sound/card2"
udev.id = "usb-SteelSeries_SteelSeries_Arctis_7-00"
device.bus = "usb"
device.vendor.id = "1038"
device.vendor.name = "SteelSeries ApS"
device.product.id = "12ad"
device.product.name = "SteelSeries Arctis 7"
device.serial = "SteelSeries_SteelSeries_Arctis_7"
device.string = "hw:2,0,0"
device.buffering.buffer_size = "176400"
device.buffering.fragment_size = "88200"
device.access_mode = "mmap+timer"
device.profile.name = "analog-mono"
device.profile.description = "Analoog mono"
device.description = "SteelSeries Arctis 7 Analoog mono"
alsa.mixer_name = "USB Mixer"
alsa.components = "USB1038:12ad"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
Ports:
steelseries-arctis-input: Headset Microphone (priority: 0)
Active Port: steelseries-arctis-input
Formats:
pcm
Source Output #0
Driver: protocol-native.c
Owner Module: 10
Client: 2
Source: 0
Sample Specification: float32le 1ch 25Hz
Channel Map: mono
Format: pcm, format.sample_format = "\"float32le\"" format.rate = "25"
format.channels = "1" format.channel_map = "\"mono\""
Corked: no
Mute: no
Volume: mono: 65536 / 100% / 0.00 dB
balance 0.00
Buffer Latency: 0 usec
Source Latency: 2657 usec
Resample method: peaks
Properties:
media.name = "Peak detect"
application.name = "PulseAudio Volume Control"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "33"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "3.0"
application.process.id = "8398"
application.process.user = "guus"
application.process.host = "haplo"
application.process.binary = "pavucontrol"
application.language = "C.UTF-8"
window.x11.display = ":0.0"
application.process.machine_id =
"f39ea738dc75fa2de9d197bc49abd805"
application.process.session_id = "15"
module-stream-restore.id =
"source-output-by-application-id:org.PulseAudio.pavucontrol"
Source Output #1
Driver: protocol-native.c
Owner Module: 10
Client: 2
Source: 1
Sample Specification: float32le 1ch 25Hz
Channel Map: mono
Format: pcm, format.sample_format = "\"float32le\"" format.rate = "25"
format.channels = "1" format.channel_map = "\"mono\""
Corked: no
Mute: no
Volume: mono: 65536 / 100% / 0.00 dB
balance 0.00
Buffer Latency: 27823 usec
Source Latency: 0 usec
Resample method: peaks
Properties:
media.name = "Peak detect"
application.name = "PulseAudio Volume Control"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "33"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "3.0"
application.process.id = "8398"
application.process.user = "guus"
application.process.host = "haplo"
application.process.binary = "pavucontrol"
application.language = "C.UTF-8"
window.x11.display = ":0.0"
application.process.machine_id =
"f39ea738dc75fa2de9d197bc49abd805"
application.process.session_id = "15"
module-stream-restore.id =
"source-output-by-application-id:org.PulseAudio.pavucontrol"
Source Output #2
Driver: protocol-native.c
Owner Module: 10
Client: 2
Source: 2
Sample Specification: float32le 1ch 25Hz
Channel Map: mono
Format: pcm, format.sample_format = "\"float32le\"" format.rate = "25"
format.channels = "1" format.channel_map = "\"mono\""
Corked: no
Mute: no
Volume: mono: 65536 / 100% / 0.00 dB
balance 0.00
Buffer Latency: 19977 usec
Source Latency: 0 usec
Resample method: peaks
Properties:
media.name = "Peak detect"
application.name = "PulseAudio Volume Control"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "33"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "3.0"
application.process.id = "8398"
application.process.user = "guus"
application.process.host = "haplo"
application.process.binary = "pavucontrol"
application.language = "C.UTF-8"
window.x11.display = ":0.0"
application.process.machine_id =
"f39ea738dc75fa2de9d197bc49abd805"
application.process.session_id = "15"
module-stream-restore.id =
"source-output-by-application-id:org.PulseAudio.pavucontrol"
Source Output #3
Driver: protocol-native.c
Owner Module: 10
Client: 2
Source: 3
Sample Specification: float32le 1ch 25Hz
Channel Map: mono
Format: pcm, format.sample_format = "\"float32le\"" format.rate = "25"
format.channels = "1" format.channel_map = "\"mono\""
Corked: no
Mute: no
Volume: mono: 65536 / 100% / 0.00 dB
balance 0.00
Buffer Latency: 40000 usec
Source Latency: 0 usec
Resample method: peaks
Properties:
media.name = "Peak detect"
application.name = "PulseAudio Volume Control"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "33"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "3.0"
application.process.id = "8398"
application.process.user = "guus"
application.process.host = "haplo"
application.process.binary = "pavucontrol"
application.language = "C.UTF-8"
window.x11.display = ":0.0"
application.process.machine_id =
"f39ea738dc75fa2de9d197bc49abd805"
application.process.session_id = "15"
module-stream-restore.id =
"source-output-by-application-id:org.PulseAudio.pavucontrol"
Source Output #4
Driver: protocol-native.c
Owner Module: 10
Client: 2
Source: 4
Sample Specification: float32le 1ch 25Hz
Channel Map: mono
Format: pcm, format.sample_format = "\"float32le\"" format.rate = "25"
format.channels = "1" format.channel_map = "\"mono\""
Corked: no
Mute: no
Volume: mono: 65536 / 100% / 0.00 dB
balance 0.00
Buffer Latency: 32131 usec
Source Latency: 0 usec
Resample method: peaks
Properties:
media.name = "Peak detect"
application.name = "PulseAudio Volume Control"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "33"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "3.0"
application.process.id = "8398"
application.process.user = "guus"
application.process.host = "haplo"
application.process.binary = "pavucontrol"
application.language = "C.UTF-8"
window.x11.display = ":0.0"
application.process.machine_id =
"f39ea738dc75fa2de9d197bc49abd805"
application.process.session_id = "15"
module-stream-restore.id =
"source-output-by-application-id:org.PulseAudio.pavucontrol"
Source Output #5
Driver: protocol-native.c
Owner Module: 10
Client: 2
Source: 5
Sample Specification: float32le 1ch 25Hz
Channel Map: mono
Format: pcm, format.sample_format = "\"float32le\"" format.rate = "25"
format.channels = "1" format.channel_map = "\"mono\""
Corked: no
Mute: no
Volume: mono: 65536 / 100% / 0.00 dB
balance 0.00
Buffer Latency: 0 usec
Source Latency: 0 usec
Resample method: peaks
Properties:
media.name = "Peak detect"
application.name = "PulseAudio Volume Control"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "33"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "3.0"
application.process.id = "8398"
application.process.user = "guus"
application.process.host = "haplo"
application.process.binary = "pavucontrol"
application.language = "C.UTF-8"
window.x11.display = ":0.0"
application.process.machine_id =
"f39ea738dc75fa2de9d197bc49abd805"
application.process.session_id = "15"
module-stream-restore.id =
"source-output-by-application-id:org.PulseAudio.pavucontrol"
Client #0
Driver: module-systemd-login.c
Owner Module: 17
Properties:
application.name = "Login Session 15"
systemd-login.session = "15"
Client #2
Driver: protocol-native.c
Owner Module: 10
Properties:
application.name = "PulseAudio Volume Control"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "33"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "3.0"
application.process.id = "8398"
application.process.user = "guus"
application.process.host = "haplo"
application.process.binary = "pavucontrol"
application.language = "C.UTF-8"
window.x11.display = ":0.0"
application.process.machine_id =
"f39ea738dc75fa2de9d197bc49abd805"
application.process.session_id = "15"
Client #7
Driver: protocol-native.c
Owner Module: 10
Properties:
application.name = "xfce4-pulseaudio-plugin"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "33"
application.version = "0.4.1"
application.id = "org.xfce.pulseaudio-plugin"
application.icon_name = "multimedia-volume-control"
application.process.id = "5568"
application.process.user = "guus"
application.process.host = "haplo"
application.process.binary = "wrapper-2.0"
application.language = "nl_NL.utf8"
window.x11.display = ":0"
application.process.machine_id =
"f39ea738dc75fa2de9d197bc49abd805"
application.process.session_id = "15"
Client #232
Driver: protocol-native.c
Owner Module: 10
Properties:
application.name = "pactl"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "33"
application.process.id = "21465"
application.process.user = "guus"
application.process.host = "haplo"
application.process.binary = "pactl"
application.language = "C"
window.x11.display = ":0.0"
application.process.machine_id =
"f39ea738dc75fa2de9d197bc49abd805"
application.process.session_id = "15"
Card #0
Name:
alsa_card.usb-Blue_Microphones_Yeti_Stereo_Microphone_797_2017_12_18_25487-00
Driver: module-alsa-card.c
Owner Module: 6
Properties:
alsa.card = "3"
alsa.card_name = "Yeti Stereo Microphone"
alsa.long_card_name = "Blue Microphones Yeti Stereo Microphone
at usb-0000:06:00.1-1, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:06:00.1-usb-0:1:1.0"
sysfs.path =
"/devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:06:00.1/usb3/3-1/3-1:1.0/sound/card3"
udev.id =
"usb-Blue_Microphones_Yeti_Stereo_Microphone_797_2017_12_18_25487-00"
device.bus = "usb"
device.vendor.id = "b58e"
device.vendor.name = "Blue Microphones"
device.product.id = "9e84"
device.product.name = "Yeti Stereo Microphone"
device.serial =
"Blue_Microphones_Yeti_Stereo_Microphone_797_2017_12_18_25487"
device.form_factor = "microphone"
device.string = "3"
device.description = "Yeti Stereo Microphone"
module-udev-detect.discovered = "1"
device.icon_name = "audio-input-microphone-usb"
Profiles:
input:analog-stereo: Analoog stereo Input (sinks: 0, sources:
1, priority: 65, available: yes)
input:iec958-stereo: Digitaal stereo (IEC958) Input (sinks: 0,
sources: 1, priority: 55, available: yes)
output:analog-stereo: Analoog stereo Output (sinks: 1, sources:
0, priority: 6500, available: yes)
output:analog-stereo+input:analog-stereo: Analoog stereo duplex
(sinks: 1, sources: 1, priority: 6565, available: yes)
output:analog-stereo+input:iec958-stereo: Analoog stereo Output
+ Digitaal stereo (IEC958) Input (sinks: 1, sources: 1, priority: 6555,
available: yes)
output:iec958-stereo: Digitaal stereo (IEC958) Output (sinks:
1, sources: 0, priority: 5500, available: yes)
output:iec958-stereo+input:analog-stereo: Digitaal stereo
(IEC958) Output + Analoog stereo Input (sinks: 1, sources: 1, priority: 5565,
available: yes)
output:iec958-stereo+input:iec958-stereo: Digitaal stereo
duplex (IEC958) (sinks: 1, sources: 1, priority: 5555, available: yes)
output:iec958-ac3-surround-51: Digitaal surround 5.1
(IEC958/AC3) Output (sinks: 1, sources: 0, priority: 300, available: yes)
output:iec958-ac3-surround-51+input:analog-stereo: Digitaal
surround 5.1 (IEC958/AC3) Output + Analoog stereo Input (sinks: 1, sources: 1,
priority: 365, available: yes)
output:iec958-ac3-surround-51+input:iec958-stereo: Digitaal
surround 5.1 (IEC958/AC3) Output + Digitaal stereo (IEC958) Input (sinks: 1,
sources: 1, priority: 355, available: yes)
off: Uit (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: input:analog-stereo
Ports:
analog-input-mic: Microfoon (priority: 8700, latency offset: 0
usec)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-stereo,
output:analog-stereo+input:analog-stereo,
output:iec958-stereo+input:analog-stereo,
output:iec958-ac3-surround-51+input:analog-stereo
iec958-stereo-input: Digital Input (S/PDIF) (priority: 0,
latency offset: 0 usec)
Part of profile(s): input:iec958-stereo,
output:analog-stereo+input:iec958-stereo,
output:iec958-stereo+input:iec958-stereo,
output:iec958-ac3-surround-51+input:iec958-stereo
analog-output-speaker: Speakers (priority: 10000, latency
offset: 0 usec)
Properties:
device.icon_name = "audio-speakers"
Part of profile(s): output:analog-stereo,
output:analog-stereo+input:analog-stereo,
output:analog-stereo+input:iec958-stereo
iec958-stereo-output: Digital Output (S/PDIF) (priority: 0,
latency offset: 0 usec)
Part of profile(s): output:iec958-stereo,
output:iec958-stereo+input:analog-stereo,
output:iec958-stereo+input:iec958-stereo
Card #1
Name: alsa_card.pci-0000_09_00.1
Driver: module-alsa-card.c
Owner Module: 7
Properties:
alsa.card = "0"
alsa.card_name = "HDA NVidia"
alsa.long_card_name = "HDA NVidia at 0xf7080000 irq 110"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:09:00.1"
sysfs.path =
"/devices/pci0000:00/0000:00:03.1/0000:09:00.1/sound/card0"
device.bus = "pci"
device.vendor.id = "10de"
device.vendor.name = "NVIDIA Corporation"
device.product.id = "10f7"
device.product.name = "TU102 High Definition Audio Controller"
device.string = "0"
device.description = "TU102 High Definition Audio Controller"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Profiles:
output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1,
sources: 0, priority: 5900, available: no)
output:hdmi-surround: Digital Surround 5.1 (HDMI) Output
(sinks: 1, sources: 0, priority: 800, available: no)
output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output
(sinks: 1, sources: 0, priority: 800, available: no)
output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output
(sinks: 1, sources: 0, priority: 5700, available: yes)
output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output
(sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3)
Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3)
Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output
(sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4)
Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4)
Output (sinks: 1, sources: 0, priority: 600, available: no)
off: Uit (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: output:hdmi-stereo-extra1
Ports:
hdmi-output-0: HDMI / DisplayPort (priority: 5900, latency
offset: 0 usec, not available)
Properties:
device.icon_name = "video-display"
Part of profile(s): output:hdmi-stereo,
output:hdmi-surround, output:hdmi-surround71
hdmi-output-1: HDMI / DisplayPort 2 (priority: 5800, latency
offset: 0 usec, available)
Properties:
device.icon_name = "video-display"
device.product.name = "34GK950F
"
Part of profile(s): output:hdmi-stereo-extra1
hdmi-output-2: HDMI / DisplayPort 3 (priority: 5700, latency
offset: 0 usec, not available)
Properties:
device.icon_name = "video-display"
Part of profile(s): output:hdmi-stereo-extra2,
output:hdmi-surround-extra2, output:hdmi-surround71-extra2
hdmi-output-3: HDMI / DisplayPort 4 (priority: 5600, latency
offset: 0 usec, not available)
Properties:
device.icon_name = "video-display"
Part of profile(s): output:hdmi-stereo-extra3,
output:hdmi-surround-extra3, output:hdmi-surround71-extra3
Card #2
Name: alsa_card.pci-0000_0b_00.4
Driver: module-alsa-card.c
Owner Module: 9
Properties:
alsa.card = "1"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xf7a00000 irq 112"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:0b:00.4"
sysfs.path =
"/devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1"
device.bus = "pci"
device.vendor.id = "1022"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
device.product.id = "1487"
device.product.name = "Starship/Matisse HD Audio Controller"
device.string = "1"
device.description = "Starship/Matisse HD Audio Controller"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Profiles:
input:analog-stereo: Analoog stereo Input (sinks: 0, sources:
1, priority: 65, available: no)
output:analog-stereo: Analoog stereo Output (sinks: 1, sources:
0, priority: 6500, available: yes)
output:analog-stereo+input:analog-stereo: Analoog stereo duplex
(sinks: 1, sources: 1, priority: 6565, available: no)
output:analog-surround-21: Analoog surround 2.1 Output (sinks:
1, sources: 0, priority: 1300, available: yes)
output:analog-surround-21+input:analog-stereo: Analoog surround
2.1 Output + Analoog stereo Input (sinks: 1, sources: 1, priority: 1365,
available: no)
output:analog-surround-40: Analoog surround 4.0 Output (sinks:
1, sources: 0, priority: 1200, available: yes)
output:analog-surround-40+input:analog-stereo: Analoog surround
4.0 Output + Analoog stereo Input (sinks: 1, sources: 1, priority: 1265,
available: no)
output:analog-surround-41: Analoog surround 4.1 Output (sinks:
1, sources: 0, priority: 1300, available: yes)
output:analog-surround-41+input:analog-stereo: Analoog surround
4.1 Output + Analoog stereo Input (sinks: 1, sources: 1, priority: 1365,
available: no)
output:analog-surround-50: Analoog surround 5.0 Output (sinks:
1, sources: 0, priority: 1200, available: yes)
output:analog-surround-50+input:analog-stereo: Analoog surround
5.0 Output + Analoog stereo Input (sinks: 1, sources: 1, priority: 1265,
available: no)
output:analog-surround-51: Analoog surround 5.1 Output (sinks:
1, sources: 0, priority: 1300, available: yes)
output:analog-surround-51+input:analog-stereo: Analoog surround
5.1 Output + Analoog stereo Input (sinks: 1, sources: 1, priority: 1365,
available: no)
output:iec958-stereo: Digitaal stereo (IEC958) Output (sinks:
1, sources: 0, priority: 5500, available: yes)
output:iec958-stereo+input:analog-stereo: Digitaal stereo
(IEC958) Output + Analoog stereo Input (sinks: 1, sources: 1, priority: 5565,
available: no)
output:iec958-ac3-surround-51: Digitaal surround 5.1
(IEC958/AC3) Output (sinks: 1, sources: 0, priority: 300, available: yes)
output:iec958-ac3-surround-51+input:analog-stereo: Digitaal
surround 5.1 (IEC958/AC3) Output + Analoog stereo Input (sinks: 1, sources: 1,
priority: 365, available: no)
off: Uit (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: output:analog-stereo
Ports:
analog-input-front-mic: Front Microphone (priority: 8500,
latency offset: 0 usec, not available)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-stereo,
output:analog-stereo+input:analog-stereo,
output:analog-surround-21+input:analog-stereo,
output:analog-surround-40+input:analog-stereo,
output:analog-surround-41+input:analog-stereo,
output:analog-surround-50+input:analog-stereo,
output:analog-surround-51+input:analog-stereo,
output:iec958-stereo+input:analog-stereo,
output:iec958-ac3-surround-51+input:analog-stereo
analog-input-rear-mic: Rear Microphone (priority: 8200, latency
offset: 0 usec, not available)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-stereo,
output:analog-stereo+input:analog-stereo,
output:analog-surround-21+input:analog-stereo,
output:analog-surround-40+input:analog-stereo,
output:analog-surround-41+input:analog-stereo,
output:analog-surround-50+input:analog-stereo,
output:analog-surround-51+input:analog-stereo,
output:iec958-stereo+input:analog-stereo,
output:iec958-ac3-surround-51+input:analog-stereo
analog-input-linein: Lijn-in (priority: 8100, latency offset: 0
usec, not available)
Part of profile(s): input:analog-stereo,
output:analog-stereo+input:analog-stereo,
output:analog-surround-21+input:analog-stereo,
output:analog-surround-40+input:analog-stereo,
output:analog-surround-41+input:analog-stereo,
output:analog-surround-50+input:analog-stereo,
output:analog-surround-51+input:analog-stereo,
output:iec958-stereo+input:analog-stereo,
output:iec958-ac3-surround-51+input:analog-stereo
analog-output-lineout: Line Out (priority: 9000, latency
offset: 0 usec, available)
Part of profile(s): output:analog-stereo,
output:analog-stereo+input:analog-stereo, output:analog-surround-21,
output:analog-surround-21+input:analog-stereo, output:analog-surround-40,
output:analog-surround-40+input:analog-stereo, output:analog-surround-41,
output:analog-surround-41+input:analog-stereo, output:analog-surround-50,
output:analog-surround-50+input:analog-stereo, output:analog-surround-51,
output:analog-surround-51+input:analog-stereo
analog-output-headphones: Analoge koptelefoon (priority: 9900,
latency offset: 0 usec, not available)
Properties:
device.icon_name = "audio-headphones"
Part of profile(s): output:analog-stereo,
output:analog-stereo+input:analog-stereo
iec958-stereo-output: Digital Output (S/PDIF) (priority: 0,
latency offset: 0 usec)
Part of profile(s): output:iec958-stereo,
output:iec958-stereo+input:analog-stereo
Card #3
Name: alsa_card.usb-SteelSeries_SteelSeries_Arctis_7-00
Driver: module-alsa-card.c
Owner Module: 22
Properties:
alsa.card = "2"
alsa.card_name = "SteelSeries Arctis 7"
alsa.long_card_name = "SteelSeries SteelSeries Arctis 7 at
usb-0000:0b:00.3-3, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:0b:00.3-usb-0:3:1.0"
sysfs.path =
"/devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb9/9-3/9-3:1.0/sound/card2"
udev.id = "usb-SteelSeries_SteelSeries_Arctis_7-00"
device.bus = "usb"
device.vendor.id = "1038"
device.vendor.name = "SteelSeries ApS"
device.product.id = "12ad"
device.product.name = "SteelSeries Arctis 7"
device.serial = "SteelSeries_SteelSeries_Arctis_7"
device.string = "2"
device.description = "SteelSeries Arctis 7"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
Profiles:
output:analog-mono+output:analog-stereo+input:analog-mono:
Analoog mono Output + Analoog stereo Output + Analoog mono Input (sinks: 2,
sources: 1, priority: 5100, available: yes)
input:analog-mono: Analoog mono Input (sinks: 0, sources: 1,
priority: 0, available: yes)
output:analog-mono: Analoog mono Output (sinks: 1, sources: 0,
priority: 0, available: yes)
output:analog-mono+input:analog-mono: Analoog mono duplex
(sinks: 1, sources: 1, priority: 0, available: yes)
output:analog-stereo: Analoog stereo Output (sinks: 1, sources:
0, priority: 5000, available: yes)
output:analog-stereo+input:analog-mono: Analoog stereo Output +
Analoog mono Input (sinks: 1, sources: 1, priority: 5000, available: yes)
off: Uit (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile:
output:analog-mono+output:analog-stereo+input:analog-mono
Ports:
steelseries-arctis-output-mono: Headphones Mono Output
(priority: 0, latency offset: 0 usec)
Part of profile(s):
output:analog-mono+output:analog-stereo+input:analog-mono, output:analog-mono,
output:analog-mono+input:analog-mono
steelseries-arctis-output-stereo: Analoge koptelefoon
(priority: 0, latency offset: 0 usec)
Part of profile(s):
output:analog-mono+output:analog-stereo+input:analog-mono,
output:analog-stereo, output:analog-stereo+input:analog-mono
steelseries-arctis-input: Headset Microphone (priority: 0,
latency offset: 0 usec)
Part of profile(s):
output:analog-mono+output:analog-stereo+input:analog-mono, input:analog-mono,
output:analog-mono+input:analog-mono, output:analog-stereo+input:analog-mono
Server String: /run/user/1000/pulse/native
Library Protocol Version: 33
Server Protocol Version: 33
Is Local: yes
Client Index: 233
Tile Size: 65472
User Name: guus
Host Name: haplo
Server Name: pulseaudio
Server Version: 12.99.2
Default Sample Specification: s16le 2ch 44100Hz
Default Channel Map: front-left,front-right
Default Sink: alsa_output.pci-0000_0b_00.4.analog-stereo
Default Source: alsa_output.pci-0000_0b_00.4.analog-stereo.monitor
Cookie: 2221:18ed
_______________________________________________
pkg-pulseaudio-devel mailing list
[email protected]
https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/pkg-pulseaudio-devel
