Package: pulseaudio Version: 15.0+dfsg1-4+b1 Severity: normal Tags: upstream X-Debbugs-Cc: julianhug...@gmail.com
Dear Maintainer, pulseaudio only plays back at default sample rate. The settings in /etc/pulse/daemon.conf "avoid-resampling = true" and "alternate-sample-rate = 48000" are ineffective, though when I run `pactl list modules` my alsa cards are shown with "avoid-resampling = true". For example: "Module #9 Name: module-alsa-card Argument: device_id="3" name="usb- XMOS_Clover_AUDIO_XMOS_Clover_AUDIO-00" card_name="alsa_card.usb- XMOS_Clover_AUDIO_XMOS_Clover_AUDIO-00" namereg_fail=false tsched=no fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=yes card_properties="module-udev-detect.discovered=1"" The above is a device which supports multiple sample rates and before I updated from Debian Bullseye to Bookworm pulseaudio did honour the "avoid_resampling=yes" option. Now it *only* plays audio at default sample rate set in daemon.conf I believe this is an upstream bug as I have seen users of Red Hat/Fedora and Arch making identical reports in their trackers. -- Package-specific info: File '/etc/default/pulseaudio' does not exist -- System Information: Debian Release: bookworm/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 5.18.0-1-amd64 (SMP w/12 CPU threads; PREEMPT) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), LANGUAGE=en_GB:en Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages pulseaudio depends on: ii adduser 3.121 ii init-system-helpers 1.63 ii libasound2 1.2.6.1-2+b1 ii libasound2-plugins 1:1.2.6-dmo1 ii libc6 2.33-7 ii libcap2 1:2.44-1 ii libdbus-1-3 1.14.0-1 ii libfftw3-single3 3.3.8-2 ii libgcc-s1 12.1.0-2 ii libglib2.0-0 2.72.2-2 ii libgstreamer-plugins-base1.0-0 1.20.2-dmo2 ii libgstreamer1.0-0 1.20.2-1 ii libice6 2:1.0.10-1 ii libltdl7 2.4.7-4 ii liborc-0.4-0 1:0.4.32-2 ii libpulse0 15.0+dfsg1-4+b1 ii libsm6 2:1.2.3-1 ii libsndfile1 1.0.31-2 ii libsoxr0 0.1.3-4 ii libspeexdsp1 1.2.0-1 ii libstdc++6 12.1.0-2 ii libsystemd0 250.4-1 ii libtdb1 1.4.6-3 ii libudev1 250.4-1 ii libwebrtc-audio-processing1 0.3-1+b1 ii libx11-6 2:1.7.5-1 ii libx11-xcb1 2:1.7.5-1 ii libxcb1 1.14-3 ii libxtst6 2:1.2.3-1.1 ii lsb-base 11.2 ii pulseaudio-utils 15.0+dfsg1-4+b1 Versions of packages pulseaudio recommends: ii dbus-user-session 1.14.0-1 ii libpam-systemd [logind] 250.4-1 ii rtkit 0.13-4 Versions of packages pulseaudio suggests: ii paprefs 1.2-1 ii pavucontrol 5.0-2 ii pavumeter 0.9.3-4+b4 ii udev 250.4-1 -- Configuration Files: /etc/pulse/daemon.conf changed: ; daemonize = no ; fail = yes ; allow-module-loading = yes ; allow-exit = yes ; use-pid-file = yes ; system-instance = no ; local-server-type = user ; enable-shm = yes ; enable-memfd = yes ; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB ; lock-memory = no ; cpu-limit = no ; high-priority = yes ; nice-level = -11 ; realtime-scheduling = yes ; realtime-priority = 5 ; exit-idle-time = 20 ; scache-idle-time = 20 ; dl-search-path = (depends on architecture) ; load-default-script-file = yes ; default-script-file = /etc/pulse/default.pa ; log-target = auto ; log-level = notice ; log-meta = no ; log-time = no ; log-backtrace = 0 ; resample-method = speex-float-1 resample-method = soxr-vhq ; avoid-resampling = false avoid-resampling = true ; enable-remixing = yes ; remixing-use-all-sink-channels = yes ; enable-lfe-remixing = no ; lfe-crossover-freq = 0 ; flat-volumes = yes ; rlimit-fsize = -1 ; rlimit-data = -1 ; rlimit-stack = -1 ; rlimit-core = -1 ; rlimit-as = -1 ; rlimit-rss = -1 ; rlimit-nproc = -1 ; rlimit-nofile = 256 ; rlimit-memlock = -1 ; rlimit-locks = -1 ; rlimit-sigpending = -1 ; rlimit-msgqueue = -1 ; rlimit-nice = 31 ; rlimit-rtprio = 9 ; rlimit-rttime = 200000 ; default-sample-format = s16le default-sample-format = s24le ; default-sample-rate = 44100 ; alternate-sample-rate = 48000 ; default-sample-channels = 2 ; default-channel-map = front-left,front-right ; default-fragments = 4 ; default-fragment-size-msec = 25 ; enable-deferred-volume = yes ; deferred-volume-safety-margin-usec = 8000 ; deferred-volume-extra-delay-usec = 0 /etc/pulse/default.pa changed: .fail load-module module-device-restore load-module module-stream-restore load-module module-card-restore load-module module-augment-properties load-module module-switch-on-port-available .ifexists module-udev-detect.so load-module module-udev-detect tsched=0 avoid_resampling=true .else load-module module-detect .endif .ifexists module-jackdbus-detect.so .nofail load-module module-jackdbus-detect channels=2 .fail .endif .ifexists module-bluetooth-policy.so load-module module-bluetooth-policy .endif .ifexists module-bluetooth-discover.so load-module module-bluetooth-discover .endif .ifexists module-esound-protocol-unix.so load-module module-esound-protocol-unix .endif load-module module-native-protocol-unix load-module module-native-protocol-tcp auth-anonymous=1 load-module module-zeroconf-publish .ifexists module-gsettings.so .nofail load-module module-gsettings .fail .endif load-module module-default-device-restore load-module module-always-sink load-module module-intended-roles .ifexists module-console-kit.so load-module module-console-kit .endif .ifexists module-systemd-login.so load-module module-systemd-login .endif load-module module-position-event-sounds load-module module-role-cork load-module module-filter-heuristics load-module module-filter-apply -- no debconf information
# This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify # it under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. ## Configuration file for PulseAudio clients. See pulse-client.conf(5) for ## more information. Default values are commented out. Use either ; or # for ## commenting. ; default-sink = ; default-source = ; default-server = ; default-dbus-server = ; autospawn = yes ; daemon-binary = /usr/bin/pulseaudio ; extra-arguments = --log-target=syslog ; cookie-file = ; enable-shm = yes ; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB ; auto-connect-localhost = no ; auto-connect-display = no
# This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify # it under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. ## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for ## more information. Default values are commented out. Use either ; or # for ## commenting. ; daemonize = no ; fail = yes ; allow-module-loading = yes ; allow-exit = yes ; use-pid-file = yes ; system-instance = no ; local-server-type = user ; enable-shm = yes ; enable-memfd = yes ; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB ; lock-memory = no ; cpu-limit = no ; high-priority = yes ; nice-level = -11 ; realtime-scheduling = yes ; realtime-priority = 5 ; exit-idle-time = 20 ; scache-idle-time = 20 ; dl-search-path = (depends on architecture) ; load-default-script-file = yes ; default-script-file = /etc/pulse/default.pa ; log-target = auto ; log-level = notice ; log-meta = no ; log-time = no ; log-backtrace = 0 ; resample-method = speex-float-1 resample-method = soxr-vhq ; avoid-resampling = false avoid-resampling = true ; enable-remixing = yes ; remixing-use-all-sink-channels = yes ; enable-lfe-remixing = no ; lfe-crossover-freq = 0 ; flat-volumes = yes ; rlimit-fsize = -1 ; rlimit-data = -1 ; rlimit-stack = -1 ; rlimit-core = -1 ; rlimit-as = -1 ; rlimit-rss = -1 ; rlimit-nproc = -1 ; rlimit-nofile = 256 ; rlimit-memlock = -1 ; rlimit-locks = -1 ; rlimit-sigpending = -1 ; rlimit-msgqueue = -1 ; rlimit-nice = 31 ; rlimit-rtprio = 9 ; rlimit-rttime = 200000 ; default-sample-format = s16le default-sample-format = s24le ; default-sample-rate = 44100 ; alternate-sample-rate = 48000 ; default-sample-channels = 2 ; default-channel-map = front-left,front-right ; default-fragments = 4 ; default-fragment-size-msec = 25 ; enable-deferred-volume = yes ; deferred-volume-safety-margin-usec = 8000 ; deferred-volume-extra-delay-usec = 0
#!/usr/bin/pulseaudio -nF # # This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. # This startup script is used only if PulseAudio is started per-user # (i.e. not in system mode) .fail ### Automatically restore the volume of streams and devices load-module module-device-restore load-module module-stream-restore load-module module-card-restore ### Automatically augment property information from .desktop files ### stored in /usr/share/application load-module module-augment-properties ### Should be after module-*-restore but before module-*-detect load-module module-switch-on-port-available ### Load audio drivers statically ### (it's probably better to not load these drivers manually, but instead ### use module-udev-detect -- see below -- for doing this automatically) #load-module module-alsa-sink #load-module module-alsa-source device=hw:1,0 #load-module module-oss device="/dev/dsp" sink_name=output source_name=input #load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input #load-module module-null-sink #load-module module-pipe-sink ### Automatically load driver modules depending on the hardware available .ifexists module-udev-detect.so load-module module-udev-detect tsched=0 avoid_resampling=true .else ### Use the static hardware detection module (for systems that lack udev support) load-module module-detect .endif ### Automatically connect sink and source if JACK server is present .ifexists module-jackdbus-detect.so .nofail load-module module-jackdbus-detect channels=2 .fail .endif ### Automatically load driver modules for Bluetooth hardware .ifexists module-bluetooth-policy.so load-module module-bluetooth-policy .endif .ifexists module-bluetooth-discover.so load-module module-bluetooth-discover .endif ### Load several protocols .ifexists module-esound-protocol-unix.so load-module module-esound-protocol-unix .endif load-module module-native-protocol-unix ### Network access (may be configured with paprefs, so leave this commented ### here if you plan to use paprefs) #load-module module-esound-protocol-tcp load-module module-native-protocol-tcp auth-anonymous=1 load-module module-zeroconf-publish ### Load the RTP receiver module (also configured via paprefs, see above) #load-module module-rtp-recv ### Load the RTP sender module (also configured via paprefs, see above) #load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'" #load-module module-rtp-send source=rtp.monitor ### Load additional modules from GSettings. This can be configured with the paprefs tool. ### Please keep in mind that the modules configured by paprefs might conflict with manually ### loaded modules. .ifexists module-gsettings.so .nofail load-module module-gsettings .fail .endif ### Automatically restore the default sink/source when changed by the user ### during runtime ### NOTE: This should be loaded as early as possible so that subsequent modules ### that look up the default sink/source get the right value load-module module-default-device-restore ### Make sure we always have a sink around, even if it is a null sink. load-module module-always-sink ### Honour intended role device property load-module module-intended-roles ### Automatically suspend sinks/sources that become idle for too long #load-module module-suspend-on-idle ### If autoexit on idle is enabled we want to make sure we only quit ### when no local session needs us anymore. .ifexists module-console-kit.so load-module module-console-kit .endif .ifexists module-systemd-login.so load-module module-systemd-login .endif ### Enable positioned event sounds load-module module-position-event-sounds ### Cork music/video streams when a phone stream is active load-module module-role-cork ### Modules to allow autoloading of filters (such as echo cancellation) ### on demand. module-filter-heuristics tries to determine what filters ### make sense, and module-filter-apply does the heavy-lifting of ### loading modules and rerouting streams. load-module module-filter-heuristics load-module module-filter-apply ### Make some devices default #set-default-sink output #set-default-source input #load-module module-simple-protocol-tcp source=1 record=true port=12345 format=s16le
#!/usr/bin/pulseaudio -nF # # This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. # This startup script is used only if PulseAudio is started in system # mode. ### Automatically restore the volume of streams and devices load-module module-device-restore load-module module-stream-restore load-module module-card-restore ### Automatically load driver modules depending on the hardware available .ifexists module-udev-detect.so load-module module-udev-detect .else ### Use the static hardware detection module (for systems that lack udev/hal support) load-module module-detect .endif ### Load several protocols .ifexists module-esound-protocol-unix.so load-module module-esound-protocol-unix .endif load-module module-native-protocol-unix ### Automatically restore the default sink/source when changed by the user ### during runtime ### NOTE: This should be loaded as early as possible so that subsequent modules ### that look up the default sink/source get the right value load-module module-default-device-restore ### Make sure we always have a sink around, even if it is a null sink. load-module module-always-sink ### Automatically suspend sinks/sources that become idle for too long load-module module-suspend-on-idle ### Enable positioned event sounds load-module module-position-event-sounds ### Allow including a system.pa.d directory, which if present, can be used ### for additional configuration snippets. .nofail .include /etc/pulse/system.pa.d
null Discard all samples (playback) or generate zero samples (capture) lavrate Rate Converter Plugin Using Libav/FFmpeg Library samplerate Rate Converter Plugin Using Samplerate Library speexrate Rate Converter Plugin Using Speex Resampler jack JACK Audio Connection Kit oss Open Sound System pulse PulseAudio Sound Server upmix Plugin for channel upmix (4,6,8) vdownmix Plugin for channel downmix (stereo) with a simple spacialization default Playback/recording through the PulseAudio sound server hw:CARD=HDMI,DEV=3 HDA ATI HDMI, HDMI 0 Direct hardware device without any conversions hw:CARD=HDMI,DEV=7 HDA ATI HDMI, HDMI 1 Direct hardware device without any conversions plughw:CARD=HDMI,DEV=3 HDA ATI HDMI, HDMI 0 Hardware device with all software conversions plughw:CARD=HDMI,DEV=7 HDA ATI HDMI, HDMI 1 Hardware device with all software conversions hdmi:CARD=HDMI,DEV=0 HDA ATI HDMI, HDMI 0 HDMI Audio Output hdmi:CARD=HDMI,DEV=1 HDA ATI HDMI, HDMI 1 HDMI Audio Output dmix:CARD=HDMI,DEV=3 HDA ATI HDMI, HDMI 0 Direct sample mixing device dmix:CARD=HDMI,DEV=7 HDA ATI HDMI, HDMI 1 Direct sample mixing device usbstream:CARD=HDMI HDA ATI HDMI USB Stream Output hw:CARD=DAC,DEV=0 SABAJ DA1 DAC, USB Audio Direct hardware device without any conversions plughw:CARD=DAC,DEV=0 SABAJ DA1 DAC, USB Audio Hardware device with all software conversions sysdefault:CARD=DAC SABAJ DA1 DAC, USB Audio Default Audio Device front:CARD=DAC,DEV=0 SABAJ DA1 DAC, USB Audio Front output / input surround21:CARD=DAC,DEV=0 SABAJ DA1 DAC, USB Audio 2.1 Surround output to Front and Subwoofer speakers surround40:CARD=DAC,DEV=0 SABAJ DA1 DAC, USB Audio 4.0 Surround output to Front and Rear speakers surround41:CARD=DAC,DEV=0 SABAJ DA1 DAC, USB Audio 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=DAC,DEV=0 SABAJ DA1 DAC, USB Audio 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=DAC,DEV=0 SABAJ DA1 DAC, USB Audio 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=DAC,DEV=0 SABAJ DA1 DAC, USB Audio 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=DAC,DEV=0 SABAJ DA1 DAC, USB Audio IEC958 (S/PDIF) Digital Audio Output dmix:CARD=DAC,DEV=0 SABAJ DA1 DAC, USB Audio Direct sample mixing device usbstream:CARD=DAC SABAJ DA1 DAC USB Stream Output hw:CARD=Generic,DEV=3 HD-Audio Generic, HDMI 0 Direct hardware device without any conversions hw:CARD=Generic,DEV=7 HD-Audio Generic, HDMI 1 Direct hardware device without any conversions plughw:CARD=Generic,DEV=3 HD-Audio Generic, HDMI 0 Hardware device with all software conversions plughw:CARD=Generic,DEV=7 HD-Audio Generic, HDMI 1 Hardware device with all software conversions hdmi:CARD=Generic,DEV=0 HD-Audio Generic, HDMI 0 HDMI Audio Output hdmi:CARD=Generic,DEV=1 HD-Audio Generic, HDMI 1 HDMI Audio Output dmix:CARD=Generic,DEV=3 HD-Audio Generic, HDMI 0 Direct sample mixing device dmix:CARD=Generic,DEV=7 HD-Audio Generic, HDMI 1 Direct sample mixing device usbstream:CARD=Generic HD-Audio Generic USB Stream Output hw:CARD=AUDIO,DEV=0 XMOS Clover AUDIO, USB Audio Direct hardware device without any conversions plughw:CARD=AUDIO,DEV=0 XMOS Clover AUDIO, USB Audio Hardware device with all software conversions sysdefault:CARD=AUDIO XMOS Clover AUDIO, USB Audio Default Audio Device front:CARD=AUDIO,DEV=0 XMOS Clover AUDIO, USB Audio Front output / input surround21:CARD=AUDIO,DEV=0 XMOS Clover AUDIO, USB Audio 2.1 Surround output to Front and Subwoofer speakers surround40:CARD=AUDIO,DEV=0 XMOS Clover AUDIO, USB Audio 4.0 Surround output to Front and Rear speakers surround41:CARD=AUDIO,DEV=0 XMOS Clover AUDIO, USB Audio 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=AUDIO,DEV=0 XMOS Clover AUDIO, USB Audio 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=AUDIO,DEV=0 XMOS Clover AUDIO, USB Audio 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=AUDIO,DEV=0 XMOS Clover AUDIO, USB Audio 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=AUDIO,DEV=0 XMOS Clover AUDIO, USB Audio IEC958 (S/PDIF) Digital Audio Output dmix:CARD=AUDIO,DEV=0 XMOS Clover AUDIO, USB Audio Direct sample mixing device usbstream:CARD=AUDIO XMOS Clover AUDIO USB Stream Output
Module #0 Name: module-device-restore Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Automatically restore the volume/mute state of devices" module.version = "15.0" Module #1 Name: module-stream-restore Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Automatically restore the volume/mute/device state of streams" module.version = "15.0" Module #2 Name: module-card-restore Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Automatically restore profile of cards" module.version = "15.0" Module #3 Name: module-augment-properties Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Augment the property sets of streams with additional static information" module.version = "15.0" Module #4 Name: module-switch-on-port-available Argument: Usage counter: n/a Properties: module.author = "David Henningsson" module.description = "Switches ports and profiles when devices are plugged/unplugged" module.version = "15.0" Module #5 Name: module-udev-detect Argument: tsched=0 avoid_resampling=true Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Detect available audio hardware and load matching drivers" module.version = "15.0" Module #6 Name: module-alsa-card Argument: device_id="0" name="pci-0000_12_00.1" card_name="alsa_card.pci-0000_12_00.1" namereg_fail=false tsched=no fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=yes card_properties="module-udev-detect.discovered=1" Usage counter: 2 Properties: module.author = "Lennart Poettering" module.description = "ALSA Card" module.version = "15.0" Module #7 Name: module-alsa-card Argument: device_id="1" name="usb-SABAJ_AUDIO_SABAJ_DA1_DAC-00" card_name="alsa_card.usb-SABAJ_AUDIO_SABAJ_DA1_DAC-00" namereg_fail=false tsched=no fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=yes card_properties="module-udev-detect.discovered=1" Usage counter: 5 Properties: module.author = "Lennart Poettering" module.description = "ALSA Card" module.version = "15.0" Module #8 Name: module-alsa-card Argument: device_id="2" name="pci-0000_30_00.1" card_name="alsa_card.pci-0000_30_00.1" namereg_fail=false tsched=no fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=yes card_properties="module-udev-detect.discovered=1" Usage counter: 0 Properties: module.author = "Lennart Poettering" module.description = "ALSA Card" module.version = "15.0" Module #9 Name: module-alsa-card Argument: device_id="3" name="usb-XMOS_Clover_AUDIO_XMOS_Clover_AUDIO-00" card_name="alsa_card.usb-XMOS_Clover_AUDIO_XMOS_Clover_AUDIO-00" namereg_fail=false tsched=no fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=yes card_properties="module-udev-detect.discovered=1" Usage counter: 2 Properties: module.author = "Lennart Poettering" module.description = "ALSA Card" module.version = "15.0" Module #10 Name: module-native-protocol-unix Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Native protocol (UNIX sockets)" module.version = "15.0" Module #11 Name: module-native-protocol-tcp Argument: auth-anonymous=1 Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Native protocol (TCP sockets)" module.version = "15.0" Module #12 Name: module-zeroconf-publish Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "mDNS/DNS-SD Service Publisher" module.version = "15.0" Module #13 Name: module-gsettings Argument: Usage counter: n/a Properties: module.author = "Sylvain Baubeau" module.description = "GSettings Adapter" module.version = "15.0" Module #14 Name: module-default-device-restore Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Automatically restore the default sink and source" module.version = "15.0" Module #15 Name: module-always-sink Argument: Usage counter: n/a Properties: module.author = "Colin Guthrie" module.description = "Always keeps at least one sink loaded even if it's a null one" module.version = "15.0" Module #16 Name: module-intended-roles Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Automatically set device of streams based on intended roles of devices" module.version = "15.0" Module #17 Name: module-systemd-login Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Create a client for each login session of this user" module.version = "15.0" Module #18 Name: module-position-event-sounds Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them." module.version = "15.0" Module #19 Name: module-role-cork Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Mute & cork streams with certain roles while others exist" module.version = "15.0" Module #20 Name: module-filter-heuristics Argument: Usage counter: n/a Properties: module.author = "Colin Guthrie" module.description = "Detect when various filters are desirable" module.version = "15.0" Module #21 Name: module-filter-apply Argument: Usage counter: n/a Properties: module.author = "Colin Guthrie" module.description = "Load filter sinks automatically when needed" module.version = "15.0" Module #22 Name: module-cli-protocol-unix Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Command line interface protocol (UNIX sockets)" module.version = "15.0" Module #24 Name: module-ladspa-sink Argument: sink_name=dsp master=alsa_output.usb-SABAJ_AUDIO_SABAJ_DA1_DAC-00.analog-stereo plugin=ladspa_dsp label=ladspa_dsp:jvc Usage counter: 3 Properties: Sink #0 State: IDLE Name: alsa_output.pci-0000_12_00.1.hdmi-stereo-extra1 Description: Navi 21 HDMI Audio [Radeon RX 6800/6800 XT / 6900 XT] Digital Stereo (HDMI 2) Driver: module-alsa-card.c Sample Specification: s32le 2ch 44100Hz Channel Map: front-left,front-right Owner Module: 6 Mute: no Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB balance 0.00 Base Volume: 65536 / 100% / 0.00 dB Monitor Source: alsa_output.pci-0000_12_00.1.hdmi-stereo-extra1.monitor Latency: 100113 usec, configured 100136 usec Flags: HARDWARE DECIBEL_VOLUME LATENCY SET_FORMATS Properties: alsa.resolution_bits = "32" device.api = "alsa" device.class = "sound" alsa.class = "generic" alsa.subclass = "generic-mix" alsa.name = "HDMI 1" alsa.id = "HDMI 1" alsa.subdevice = "0" alsa.subdevice_name = "subdevice #0" alsa.device = "7" alsa.card = "0" alsa.card_name = "HDA ATI HDMI" alsa.long_card_name = "HDA ATI HDMI at 0xfcd20000 irq 74" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:12:00.1" sysfs.path = "/devices/pci0000:00/0000:00:01.1/0000:10:00.0/0000:11:00.0/0000:12:00.1/sound/card0" device.bus = "pci" device.vendor.id = "1002" device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]" device.product.id = "ab28" device.product.name = "Navi 21 HDMI Audio [Radeon RX 6800/6800 XT / 6900 XT]" device.string = "hdmi:0,1" device.buffering.buffer_size = "35328" device.buffering.fragment_size = "8832" device.access_mode = "mmap" device.profile.name = "hdmi-stereo-extra1" device.profile.description = "Digital Stereo (HDMI 2)" device.description = "Navi 21 HDMI Audio [Radeon RX 6800/6800 XT / 6900 XT] Digital Stereo (HDMI 2)" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" Ports: hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, available) Active Port: hdmi-output-1 Formats: pcm Sink #1 State: RUNNING Name: alsa_output.usb-SABAJ_AUDIO_SABAJ_DA1_DAC-00.analog-stereo Description: SABAJ DA1 DAC Analog Stereo Driver: module-alsa-card.c Sample Specification: s24le 2ch 48000Hz Channel Map: front-left,front-right Owner Module: 7 Mute: no Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB balance 0.00 Base Volume: 65536 / 100% / 0.00 dB Monitor Source: alsa_output.usb-SABAJ_AUDIO_SABAJ_DA1_DAC-00.analog-stereo.monitor Latency: 103209 usec, configured 99954 usec Flags: HARDWARE DECIBEL_VOLUME LATENCY Properties: alsa.resolution_bits = "24" device.api = "alsa" device.class = "sound" alsa.class = "generic" alsa.subclass = "generic-mix" alsa.name = "USB Audio" alsa.id = "USB Audio" alsa.subdevice = "0" alsa.subdevice_name = "subdevice #0" alsa.device = "0" alsa.card = "1" alsa.card_name = "SABAJ DA1 DAC" alsa.long_card_name = "SABAJ AUDIO SABAJ DA1 DAC at usb-0000:16:00.0-4, full speed" alsa.driver_name = "snd_usb_audio" device.bus_path = "pci-0000:16:00.0-usb-0:4:1.0" sysfs.path = "/devices/pci0000:00/0000:00:02.1/0000:16:00.0/usb1/1-4/1-4:1.0/sound/card1" udev.id = "usb-SABAJ_AUDIO_SABAJ_DA1_DAC-00" device.bus = "usb" device.vendor.id = "0451" device.vendor.name = "Texas Instruments, Inc." device.product.id = "0003" device.product.name = "SABAJ DA1 DAC" device.serial = "SABAJ_AUDIO_SABAJ_DA1_DAC" device.string = "front:1" device.buffering.buffer_size = "26448" device.buffering.fragment_size = "6612" device.access_mode = "mmap" device.profile.name = "analog-stereo" device.profile.description = "Analog Stereo" device.description = "SABAJ DA1 DAC Analog Stereo" module-udev-detect.discovered = "1" device.icon_name = "audio-card-usb" Ports: analog-output: Analog Output (type: Analog, priority: 9900, availability unknown) Active Port: analog-output Formats: pcm Sink #2 State: IDLE Name: alsa_output.usb-XMOS_Clover_AUDIO_XMOS_Clover_AUDIO-00.analog-stereo Description: XMOS Clover AUDIO Analog Stereo Driver: module-alsa-card.c Sample Specification: s32le 2ch 44100Hz Channel Map: front-left,front-right Owner Module: 9 Mute: no Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB balance 0.00 Base Volume: 65536 / 100% / 0.00 dB Monitor Source: alsa_output.usb-XMOS_Clover_AUDIO_XMOS_Clover_AUDIO-00.analog-stereo.monitor Latency: 108731 usec, configured 99954 usec Flags: HARDWARE DECIBEL_VOLUME LATENCY Properties: alsa.resolution_bits = "32" device.api = "alsa" device.class = "sound" alsa.class = "generic" alsa.subclass = "generic-mix" alsa.name = "USB Audio" alsa.id = "USB Audio" alsa.subdevice = "0" alsa.subdevice_name = "subdevice #0" alsa.device = "0" alsa.card = "3" alsa.card_name = "XMOS Clover AUDIO" alsa.long_card_name = "XMOS Clover AUDIO XMOS Clover AUDIO at usb-0000:30:00.3-2.1, high speed" alsa.driver_name = "snd_usb_audio" device.bus_path = "pci-0000:30:00.3-usb-0:2.1:1.0" sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:30:00.3/usb3/3-2/3-2.1/3-2.1:1.0/sound/card3" udev.id = "usb-XMOS_Clover_AUDIO_XMOS_Clover_AUDIO-00" device.bus = "usb" device.vendor.id = "20b1" device.vendor.name = "XMOS Ltd" device.product.id = "0008" device.product.name = "XMOS Clover AUDIO" device.serial = "XMOS_Clover_AUDIO_XMOS_Clover_AUDIO" device.string = "front:3" device.buffering.buffer_size = "35264" device.buffering.fragment_size = "8816" device.access_mode = "mmap" device.profile.name = "analog-stereo" device.profile.description = "Analog Stereo" device.description = "XMOS Clover AUDIO Analog Stereo" module-udev-detect.discovered = "1" device.icon_name = "audio-card-usb" Ports: analog-output: Analog Output (type: Analog, priority: 9900, availability unknown) Active Port: analog-output Formats: pcm Sink #4 State: IDLE Name: dsp Description: LADSPA Plugin ladspa_dsp:jvc on SABAJ DA1 DAC Analog Stereo Driver: module-ladspa-sink.c Sample Specification: float32le 2ch 48000Hz Channel Map: front-left,front-right Owner Module: 24 Mute: no Volume: front-left: 65536 / 100%, front-right: 65536 / 100% balance 0.00 Base Volume: 65536 / 100% Monitor Source: dsp.monitor Latency: 103085 usec, configured 99954 usec Flags: HW_MUTE_CTRL LATENCY Properties: device.master_device = "alsa_output.usb-SABAJ_AUDIO_SABAJ_DA1_DAC-00.analog-stereo" device.class = "filter" device.ladspa.module = "ladspa_dsp" device.ladspa.label = "ladspa_dsp:jvc" device.ladspa.name = "ladspa_dsp:jvc" device.ladspa.maker = "Michael Barbour" device.ladspa.copyright = "ISC" device.ladspa.unique_id = "2383" device.description = "LADSPA Plugin ladspa_dsp:jvc on SABAJ DA1 DAC Analog Stereo" device.icon_name = "audio-card" Formats: pcm Source #0 State: RUNNING Name: alsa_output.pci-0000_12_00.1.hdmi-stereo-extra1.monitor Description: Monitor of Navi 21 HDMI Audio [Radeon RX 6800/6800 XT / 6900 XT] Digital Stereo (HDMI 2) Driver: module-alsa-card.c Sample Specification: s32le 2ch 44100Hz Channel Map: front-left,front-right Owner Module: 6 Mute: no Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB balance 0.00 Base Volume: 65536 / 100% / 0.00 dB Monitor of Sink: alsa_output.pci-0000_12_00.1.hdmi-stereo-extra1 Latency: 0 usec, configured 100136 usec Flags: DECIBEL_VOLUME LATENCY Properties: device.description = "Monitor of Navi 21 HDMI Audio [Radeon RX 6800/6800 XT / 6900 XT] Digital Stereo (HDMI 2)" device.class = "monitor" alsa.card = "0" alsa.card_name = "HDA ATI HDMI" alsa.long_card_name = "HDA ATI HDMI at 0xfcd20000 irq 74" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:12:00.1" sysfs.path = "/devices/pci0000:00/0000:00:01.1/0000:10:00.0/0000:11:00.0/0000:12:00.1/sound/card0" device.bus = "pci" device.vendor.id = "1002" device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]" device.product.id = "ab28" device.product.name = "Navi 21 HDMI Audio [Radeon RX 6800/6800 XT / 6900 XT]" device.string = "0" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" Formats: pcm Source #1 State: RUNNING Name: alsa_output.usb-SABAJ_AUDIO_SABAJ_DA1_DAC-00.analog-stereo.monitor Description: Monitor of SABAJ DA1 DAC Analog Stereo Driver: module-alsa-card.c Sample Specification: s24le 2ch 48000Hz Channel Map: front-left,front-right Owner Module: 7 Mute: no Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB balance 0.00 Base Volume: 65536 / 100% / 0.00 dB Monitor of Sink: alsa_output.usb-SABAJ_AUDIO_SABAJ_DA1_DAC-00.analog-stereo Latency: 0 usec, configured 99954 usec Flags: DECIBEL_VOLUME LATENCY Properties: device.description = "Monitor of SABAJ DA1 DAC Analog Stereo" device.class = "monitor" alsa.card = "1" alsa.card_name = "SABAJ DA1 DAC" alsa.long_card_name = "SABAJ AUDIO SABAJ DA1 DAC at usb-0000:16:00.0-4, full speed" alsa.driver_name = "snd_usb_audio" device.bus_path = "pci-0000:16:00.0-usb-0:4:1.0" sysfs.path = "/devices/pci0000:00/0000:00:02.1/0000:16:00.0/usb1/1-4/1-4:1.0/sound/card1" udev.id = "usb-SABAJ_AUDIO_SABAJ_DA1_DAC-00" device.bus = "usb" device.vendor.id = "0451" device.vendor.name = "Texas Instruments, Inc." device.product.id = "0003" device.product.name = "SABAJ DA1 DAC" device.serial = "SABAJ_AUDIO_SABAJ_DA1_DAC" device.string = "1" module-udev-detect.discovered = "1" device.icon_name = "audio-card-usb" Formats: pcm Source #2 State: RUNNING Name: alsa_output.usb-XMOS_Clover_AUDIO_XMOS_Clover_AUDIO-00.analog-stereo.monitor Description: Monitor of XMOS Clover AUDIO Analog Stereo Driver: module-alsa-card.c Sample Specification: s32le 2ch 44100Hz Channel Map: front-left,front-right Owner Module: 9 Mute: no Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB balance 0.00 Base Volume: 65536 / 100% / 0.00 dB Monitor of Sink: alsa_output.usb-XMOS_Clover_AUDIO_XMOS_Clover_AUDIO-00.analog-stereo Latency: 0 usec, configured 99954 usec Flags: DECIBEL_VOLUME LATENCY Properties: device.description = "Monitor of XMOS Clover AUDIO Analog Stereo" device.class = "monitor" alsa.card = "3" alsa.card_name = "XMOS Clover AUDIO" alsa.long_card_name = "XMOS Clover AUDIO XMOS Clover AUDIO at usb-0000:30:00.3-2.1, high speed" alsa.driver_name = "snd_usb_audio" device.bus_path = "pci-0000:30:00.3-usb-0:2.1:1.0" sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:30:00.3/usb3/3-2/3-2.1/3-2.1:1.0/sound/card3" udev.id = "usb-XMOS_Clover_AUDIO_XMOS_Clover_AUDIO-00" device.bus = "usb" device.vendor.id = "20b1" device.vendor.name = "XMOS Ltd" device.product.id = "0008" device.product.name = "XMOS Clover AUDIO" device.serial = "XMOS_Clover_AUDIO_XMOS_Clover_AUDIO" device.string = "3" module-udev-detect.discovered = "1" device.icon_name = "audio-card-usb" Formats: pcm Source #4 State: RUNNING Name: dsp.monitor Description: Monitor of LADSPA Plugin ladspa_dsp:jvc on SABAJ DA1 DAC Analog Stereo Driver: module-ladspa-sink.c Sample Specification: float32le 2ch 48000Hz Channel Map: front-left,front-right Owner Module: 24 Mute: no Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB balance 0.00 Base Volume: 65536 / 100% / 0.00 dB Monitor of Sink: dsp Latency: 0 usec, configured 99954 usec Flags: DECIBEL_VOLUME LATENCY Properties: device.description = "Monitor of LADSPA Plugin ladspa_dsp:jvc on SABAJ DA1 DAC Analog Stereo" device.class = "monitor" device.icon_name = "audio-input-microphone" Formats: pcm Sink Input #11 Driver: module-ladspa-sink.c Owner Module: 24 Client: n/a Sink: 1 Sample Specification: float32le 2ch 48000Hz Channel Map: front-left,front-right Format: pcm, format.sample_format = "\"float32le\"" format.rate = "48000" format.channels = "2" format.channel_map = "\"front-left,front-right\"" Corked: no Mute: no Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB balance 0.00 Buffer Latency: 0 usec Sink Latency: 102859 usec Resample method: copy Properties: media.name = "LADSPA Stream" media.role = "filter" module-stream-restore.id = "sink-input-by-media-role:filter" Sink Input #609 Driver: protocol-native.c Owner Module: 10 Client: 25 Sink: 4 Sample Specification: float32le 2ch 48000Hz Channel Map: front-left,front-right Format: pcm, format.sample_format = "\"float32le\"" format.rate = "48000" format.channels = "2" format.channel_map = "\"front-left,front-right\"" Corked: yes Mute: no Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB balance 0.00 Buffer Latency: 185000 usec Sink Latency: 108797 usec Resample method: n/a Properties: media.name = "ALSA Playback" application.name = "ALSA plug-in [mpv]" native-protocol.peer = "UNIX socket client" native-protocol.version = "35" application.process.id = "8924" application.process.user = "julian" application.process.host = "desktop-fatty" application.process.binary = "mpv" application.language = "C" window.x11.display = ":0" application.process.machine_id = "b22311a3bfa34e52a2c0f96edc37b317" application.process.session_id = "2" application.icon_name = "mpv" module-stream-restore.id = "sink-input-by-application-name:ALSA plug-in [mpv]" Source Output #1 Driver: protocol-native.c Owner Module: 10 Client: 13 Source: 0 Sample Specification: float32le 1ch 25Hz Channel Map: mono Format: pcm, format.sample_format = "\"float32le\"" format.rate = "25" format.channels = "1" format.channel_map = "\"mono\"" Corked: no Mute: no Volume: mono: 65536 / 100% / 0.00 dB balance 0.00 Buffer Latency: 69387 usec Source Latency: 0 usec Resample method: peaks Properties: media.name = "Peak detect" application.name = "PulseAudio Volume Control" native-protocol.peer = "UNIX socket client" native-protocol.version = "35" application.id = "org.PulseAudio.pavucontrol" application.icon_name = "audio-card" application.version = "5.0" application.process.id = "7389" application.process.user = "julian" application.process.host = "desktop-fatty" application.process.binary = "pavucontrol" application.language = "en_GB.UTF-8" window.x11.display = ":0.0" application.process.machine_id = "b22311a3bfa34e52a2c0f96edc37b317" application.process.session_id = "2" module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol" Source Output #2 Driver: protocol-native.c Owner Module: 10 Client: 13 Source: 1 Sample Specification: float32le 1ch 25Hz Channel Map: mono Format: pcm, format.sample_format = "\"float32le\"" format.rate = "25" format.channels = "1" format.channel_map = "\"mono\"" Corked: no Mute: no Volume: mono: 65536 / 100% / 0.00 dB balance 0.00 Buffer Latency: 91750 usec Source Latency: 0 usec Resample method: peaks Properties: media.name = "Peak detect" application.name = "PulseAudio Volume Control" native-protocol.peer = "UNIX socket client" native-protocol.version = "35" application.id = "org.PulseAudio.pavucontrol" application.icon_name = "audio-card" application.version = "5.0" application.process.id = "7389" application.process.user = "julian" application.process.host = "desktop-fatty" application.process.binary = "pavucontrol" application.language = "en_GB.UTF-8" window.x11.display = ":0.0" application.process.machine_id = "b22311a3bfa34e52a2c0f96edc37b317" application.process.session_id = "2" module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol" Source Output #3 Driver: protocol-native.c Owner Module: 10 Client: 13 Source: 2 Sample Specification: float32le 1ch 25Hz Channel Map: mono Format: pcm, format.sample_format = "\"float32le\"" format.rate = "25" format.channels = "1" format.channel_map = "\"mono\"" Corked: no Mute: no Volume: mono: 65536 / 100% / 0.00 dB balance 0.00 Buffer Latency: 87233 usec Source Latency: 0 usec Resample method: peaks Properties: media.name = "Peak detect" application.name = "PulseAudio Volume Control" native-protocol.peer = "UNIX socket client" native-protocol.version = "35" application.id = "org.PulseAudio.pavucontrol" application.icon_name = "audio-card" application.version = "5.0" application.process.id = "7389" application.process.user = "julian" application.process.host = "desktop-fatty" application.process.binary = "pavucontrol" application.language = "en_GB.UTF-8" window.x11.display = ":0.0" application.process.machine_id = "b22311a3bfa34e52a2c0f96edc37b317" application.process.session_id = "2" module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol" Source Output #4 Driver: protocol-native.c Owner Module: 10 Client: 13 Source: 4 Sample Specification: float32le 1ch 25Hz Channel Map: mono Format: pcm, format.sample_format = "\"float32le\"" format.rate = "25" format.channels = "1" format.channel_map = "\"mono\"" Corked: no Mute: no Volume: mono: 65536 / 100% / 0.00 dB balance 0.00 Buffer Latency: 91812 usec Source Latency: 0 usec Resample method: peaks Properties: media.name = "Peak detect" application.name = "PulseAudio Volume Control" native-protocol.peer = "UNIX socket client" native-protocol.version = "35" application.id = "org.PulseAudio.pavucontrol" application.icon_name = "audio-card" application.version = "5.0" application.process.id = "7389" application.process.user = "julian" application.process.host = "desktop-fatty" application.process.binary = "pavucontrol" application.language = "en_GB.UTF-8" window.x11.display = ":0.0" application.process.machine_id = "b22311a3bfa34e52a2c0f96edc37b317" application.process.session_id = "2" module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol" Source Output #6 Driver: protocol-native.c Owner Module: 10 Client: 13 Source: 1 Sample Specification: float32le 1ch 25Hz Channel Map: mono Format: pcm, format.sample_format = "\"float32le\"" format.rate = "25" format.channels = "1" format.channel_map = "\"mono\"" Corked: no Mute: no Volume: mono: 65536 / 100% / 0.00 dB balance 0.00 Buffer Latency: 91770 usec Source Latency: 0 usec Resample method: peaks Properties: media.name = "Peak detect" application.name = "PulseAudio Volume Control" native-protocol.peer = "UNIX socket client" native-protocol.version = "35" application.id = "org.PulseAudio.pavucontrol" application.icon_name = "audio-card" application.version = "5.0" application.process.id = "7389" application.process.user = "julian" application.process.host = "desktop-fatty" application.process.binary = "pavucontrol" application.language = "en_GB.UTF-8" window.x11.display = ":0.0" application.process.machine_id = "b22311a3bfa34e52a2c0f96edc37b317" application.process.session_id = "2" module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol" Source Output #254 Driver: protocol-native.c Owner Module: 10 Client: 13 Source: 4 Sample Specification: float32le 1ch 25Hz Channel Map: mono Format: pcm, format.sample_format = "\"float32le\"" format.rate = "25" format.channels = "1" format.channel_map = "\"mono\"" Corked: no Mute: no Volume: mono: 65536 / 100% / 0.00 dB balance 0.00 Buffer Latency: 91812 usec Source Latency: 0 usec Resample method: peaks Properties: media.name = "Peak detect" application.name = "PulseAudio Volume Control" native-protocol.peer = "UNIX socket client" native-protocol.version = "35" application.id = "org.PulseAudio.pavucontrol" application.icon_name = "audio-card" application.version = "5.0" application.process.id = "7389" application.process.user = "julian" application.process.host = "desktop-fatty" application.process.binary = "pavucontrol" application.language = "en_GB.UTF-8" window.x11.display = ":0.0" application.process.machine_id = "b22311a3bfa34e52a2c0f96edc37b317" application.process.session_id = "2" module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol" Client #0 Driver: module-systemd-login.c Owner Module: 17 Properties: application.name = "Login Session 2" systemd-login.session = "2" Client #1 Driver: protocol-native.c Owner Module: 10 Properties: application.name = "PulseAudio systray" native-protocol.peer = "UNIX socket client" native-protocol.version = "35" application.process.id = "1876" application.process.user = "julian" application.process.host = "desktop-fatty" application.process.binary = "pasystray" application.language = "en_GB.UTF-8" window.x11.display = ":0.0" application.process.machine_id = "b22311a3bfa34e52a2c0f96edc37b317" application.process.session_id = "2" application.icon_name = "pasystray" Client #6 Driver: protocol-native.c Owner Module: 10 Properties: application.name = "Steam Voice Settings" native-protocol.peer = "UNIX socket client" native-protocol.version = "35" application.process.id = "5912" application.process.user = "julian" application.process.host = "desktop-fatty" application.process.binary = "steam" window.x11.display = ":0.0" application.language = "C" application.process.machine_id = "b22311a3bfa34e52a2c0f96edc37b317" application.process.session_id = "2" application.icon_name = "steam" Client #13 Driver: protocol-native.c Owner Module: 10 Properties: application.name = "PulseAudio Volume Control" native-protocol.peer = "UNIX socket client" native-protocol.version = "35" application.id = "org.PulseAudio.pavucontrol" application.icon_name = "audio-card" application.version = "5.0" application.process.id = "7389" application.process.user = "julian" application.process.host = "desktop-fatty" application.process.binary = "pavucontrol" application.language = "en_GB.UTF-8" window.x11.display = ":0.0" application.process.machine_id = "b22311a3bfa34e52a2c0f96edc37b317" application.process.session_id = "2" Client #25 Driver: protocol-native.c Owner Module: 10 Properties: application.name = "ALSA plug-in [mpv]" native-protocol.peer = "UNIX socket client" native-protocol.version = "35" application.process.id = "8924" application.process.user = "julian" application.process.host = "desktop-fatty" application.process.binary = "mpv" application.language = "C" window.x11.display = ":0" application.process.machine_id = "b22311a3bfa34e52a2c0f96edc37b317" application.process.session_id = "2" application.icon_name = "mpv" Client #31 Driver: protocol-native.c Owner Module: 10 Properties: application.name = "pactl" native-protocol.peer = "UNIX socket client" native-protocol.version = "35" application.process.id = "9722" application.process.user = "julian" application.process.host = "desktop-fatty" application.process.binary = "pactl" application.language = "C" window.x11.display = ":0.0" application.process.machine_id = "b22311a3bfa34e52a2c0f96edc37b317" application.process.session_id = "2" Card #0 Name: alsa_card.pci-0000_12_00.1 Driver: module-alsa-card.c Owner Module: 6 Properties: alsa.card = "0" alsa.card_name = "HDA ATI HDMI" alsa.long_card_name = "HDA ATI HDMI at 0xfcd20000 irq 74" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:12:00.1" sysfs.path = "/devices/pci0000:00/0000:00:01.1/0000:10:00.0/0000:11:00.0/0000:12:00.1/sound/card0" device.bus = "pci" device.vendor.id = "1002" device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]" device.product.id = "ab28" device.product.name = "Navi 21 HDMI Audio [Radeon RX 6800/6800 XT / 6900 XT]" device.string = "0" device.description = "Navi 21 HDMI Audio [Radeon RX 6800/6800 XT / 6900 XT]" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" Profiles: output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5900, available: no) output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no) output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no) output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (sinks: 1, sources: 0, priority: 38468, available: yes) off: Off (sinks: 0, sources: 0, priority: 0, available: yes) Active Profile: output:hdmi-stereo-extra1 Ports: hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, not available) Properties: device.icon_name = "video-display" Part of profile(s): output:hdmi-stereo, output:hdmi-surround, output:hdmi-surround71 hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, latency offset: 0 usec, available) Properties: device.icon_name = "video-display" device.product.name = "BenQ GW2280" Part of profile(s): output:hdmi-stereo-extra1 Card #1 Name: alsa_card.usb-SABAJ_AUDIO_SABAJ_DA1_DAC-00 Driver: module-alsa-card.c Owner Module: 7 Properties: alsa.card = "1" alsa.card_name = "SABAJ DA1 DAC" alsa.long_card_name = "SABAJ AUDIO SABAJ DA1 DAC at usb-0000:16:00.0-4, full speed" alsa.driver_name = "snd_usb_audio" device.bus_path = "pci-0000:16:00.0-usb-0:4:1.0" sysfs.path = "/devices/pci0000:00/0000:00:02.1/0000:16:00.0/usb1/1-4/1-4:1.0/sound/card1" udev.id = "usb-SABAJ_AUDIO_SABAJ_DA1_DAC-00" device.bus = "usb" device.vendor.id = "0451" device.vendor.name = "Texas Instruments, Inc." device.product.id = "0003" device.product.name = "SABAJ DA1 DAC" device.serial = "SABAJ_AUDIO_SABAJ_DA1_DAC" device.string = "1" device.description = "SABAJ DA1 DAC" module-udev-detect.discovered = "1" device.icon_name = "audio-card-usb" Profiles: output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6500, available: yes) output:iec958-stereo: Digital Stereo (IEC958) Output (sinks: 1, sources: 0, priority: 5500, available: yes) off: Off (sinks: 0, sources: 0, priority: 0, available: yes) Active Profile: output:analog-stereo Ports: analog-output: Analog Output (type: Analog, priority: 9900, latency offset: 0 usec, availability unknown) Part of profile(s): output:analog-stereo iec958-stereo-output: Digital Output (S/PDIF) (type: SPDIF, priority: 0, latency offset: 0 usec, availability unknown) Part of profile(s): output:iec958-stereo Card #2 Name: alsa_card.pci-0000_30_00.1 Driver: module-alsa-card.c Owner Module: 8 Properties: alsa.card = "2" alsa.card_name = "HD-Audio Generic" alsa.long_card_name = "HD-Audio Generic at 0xfc780000 irq 76" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:30:00.1" sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:30:00.1/sound/card2" device.bus = "pci" device.vendor.id = "1002" device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]" device.product.id = "1637" device.product.name = "Renoir Radeon High Definition Audio Controller" device.string = "2" device.description = "Renoir Radeon High Definition Audio Controller" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" Profiles: output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5900, available: no) output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no) output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no) output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (sinks: 1, sources: 0, priority: 5700, available: no) output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no) output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no) off: Off (sinks: 0, sources: 0, priority: 0, available: yes) Active Profile: off Ports: hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, not available) Properties: device.icon_name = "video-display" Part of profile(s): output:hdmi-stereo, output:hdmi-surround, output:hdmi-surround71 hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, latency offset: 0 usec, not available) Properties: device.icon_name = "video-display" Part of profile(s): output:hdmi-stereo-extra1, output:hdmi-surround-extra1, output:hdmi-surround71-extra1 Card #3 Name: alsa_card.usb-XMOS_Clover_AUDIO_XMOS_Clover_AUDIO-00 Driver: module-alsa-card.c Owner Module: 9 Properties: alsa.card = "3" alsa.card_name = "XMOS Clover AUDIO" alsa.long_card_name = "XMOS Clover AUDIO XMOS Clover AUDIO at usb-0000:30:00.3-2.1, high speed" alsa.driver_name = "snd_usb_audio" device.bus_path = "pci-0000:30:00.3-usb-0:2.1:1.0" sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:30:00.3/usb3/3-2/3-2.1/3-2.1:1.0/sound/card3" udev.id = "usb-XMOS_Clover_AUDIO_XMOS_Clover_AUDIO-00" device.bus = "usb" device.vendor.id = "20b1" device.vendor.name = "XMOS Ltd" device.product.id = "0008" device.product.name = "XMOS Clover AUDIO" device.serial = "XMOS_Clover_AUDIO_XMOS_Clover_AUDIO" device.string = "3" device.description = "XMOS Clover AUDIO" module-udev-detect.discovered = "1" device.icon_name = "audio-card-usb" Profiles: output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6500, available: yes) output:iec958-stereo: Digital Stereo (IEC958) Output (sinks: 1, sources: 0, priority: 5500, available: yes) output:iec958-ac3-surround-51: Digital Surround 5.1 (IEC958/AC3) Output (sinks: 1, sources: 0, priority: 300, available: yes) off: Off (sinks: 0, sources: 0, priority: 0, available: yes) Active Profile: output:analog-stereo Ports: analog-output: Analog Output (type: Analog, priority: 9900, latency offset: 0 usec, availability unknown) Part of profile(s): output:analog-stereo iec958-stereo-output: Digital Output (S/PDIF) (type: SPDIF, priority: 0, latency offset: 0 usec, availability unknown) Part of profile(s): output:iec958-stereo
Server String: /run/user/1000/pulse/native Library Protocol Version: 35 Server Protocol Version: 35 Is Local: yes Client Index: 32 Tile Size: 65472 User Name: julian Host Name: desktop-fatty Server Name: pulseaudio Server Version: 15.0 Default Sample Specification: s24le 2ch 44100Hz Default Channel Map: front-left,front-right Default Sink: alsa_output.usb-SABAJ_AUDIO_SABAJ_DA1_DAC-00.analog-stereo Default Source: alsa_output.usb-SABAJ_AUDIO_SABAJ_DA1_DAC-00.analog-stereo.monitor Cookie: 591a:259a
_______________________________________________ pkg-pulseaudio-devel mailing list pkg-pulseaudio-devel@alioth-lists.debian.net https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/pkg-pulseaudio-devel