Package: pulseaudio Version: 14.2-2 Severity: minor X-Debbugs-Cc: pmcoulth...@gmail.com
Debian patches the defualt behavior of the PulseAudio client to disable autospawning the PulseAudio daemon. However the commented line in /etc/pulseaudio/client.conf does not reflect this Debian deviation from the upstream default: ; autospawn = yes Similarly, README.Debian could use some attention: - It references setting 'autospawn = no', despite it now being the default. - It references a now non-existant /etc/default/pulseaudio Thanks! -- Package-specific info: File '/etc/default/pulseaudio' does not exist -- System Information: Debian Release: 11.4 APT prefers stable APT policy: (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 5.10.0-16-amd64 (SMP w/4 CPU threads) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE not set Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages pulseaudio depends on: ii adduser 3.118 ii init-system-helpers 1.60 ii libasound2 1.2.4-1.1 ii libasound2-plugins 1.2.2-2 ii libc6 2.31-13+deb11u3 ii libcap2 1:2.44-1 ii libdbus-1-3 1.12.20-2 ii libgcc-s1 10.2.1-6 ii libice6 2:1.0.10-1 ii libltdl7 2.4.6-15 ii liborc-0.4-0 1:0.4.32-1 ii libpulse0 14.2-2 ii libsm6 2:1.2.3-1 ii libsndfile1 1.0.31-2 ii libsoxr0 0.1.3-4 ii libspeexdsp1 1.2~rc1.2-1.1 ii libstdc++6 10.2.1-6 ii libsystemd0 247.3-7 ii libtdb1 1.4.3-1+b1 ii libudev1 247.3-7 ii libwebrtc-audio-processing1 0.3-1+b1 ii libx11-6 2:1.7.2-1 ii libx11-xcb1 2:1.7.2-1 ii libxcb1 1.14-3 ii libxtst6 2:1.2.3-1 ii lsb-base 11.1.0 ii pulseaudio-utils 14.2-2 Versions of packages pulseaudio recommends: ii dbus-user-session 1.12.20-2 ii libpam-systemd [logind] 247.3-7 ii rtkit 0.13-4 Versions of packages pulseaudio suggests: pn paprefs <none> ii pavucontrol 4.0-2 pn pavumeter <none> ii udev 247.3-7 -- no debconf information
# This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify # it under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. ## Configuration file for PulseAudio clients. See pulse-client.conf(5) for ## more information. Default values are commented out. Use either ; or # for ## commenting. ; default-sink = ; default-source = ; default-server = ; default-dbus-server = ; autospawn = yes ; daemon-binary = /usr/bin/pulseaudio ; extra-arguments = --log-target=syslog ; cookie-file = ; enable-shm = yes ; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB ; auto-connect-localhost = no ; auto-connect-display = no
# This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify # it under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. ## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for ## more information. Default values are commented out. Use either ; or # for ## commenting. ; daemonize = no ; fail = yes ; allow-module-loading = yes ; allow-exit = yes ; use-pid-file = yes ; system-instance = no ; local-server-type = user ; enable-shm = yes ; enable-memfd = yes ; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB ; lock-memory = no ; cpu-limit = no ; high-priority = yes ; nice-level = -11 ; realtime-scheduling = yes ; realtime-priority = 5 ; exit-idle-time = 20 ; scache-idle-time = 20 ; dl-search-path = (depends on architecture) ; load-default-script-file = yes ; default-script-file = /etc/pulse/default.pa ; log-target = auto ; log-level = notice ; log-meta = no ; log-time = no ; log-backtrace = 0 ; resample-method = speex-float-1 ; avoid-resampling = false ; enable-remixing = yes ; remixing-use-all-sink-channels = yes ; remixing-produce-lfe = no ; remixing-consume-lfe = no ; lfe-crossover-freq = 0 ; flat-volumes = no ; rescue-streams = yes ; rlimit-fsize = -1 ; rlimit-data = -1 ; rlimit-stack = -1 ; rlimit-core = -1 ; rlimit-as = -1 ; rlimit-rss = -1 ; rlimit-nproc = -1 ; rlimit-nofile = 256 ; rlimit-memlock = -1 ; rlimit-locks = -1 ; rlimit-sigpending = -1 ; rlimit-msgqueue = -1 ; rlimit-nice = 31 ; rlimit-rtprio = 9 ; rlimit-rttime = 200000 ; default-sample-format = s16le ; default-sample-rate = 44100 ; alternate-sample-rate = 48000 ; default-sample-channels = 2 ; default-channel-map = front-left,front-right ; default-fragments = 4 ; default-fragment-size-msec = 25 ; enable-deferred-volume = yes ; deferred-volume-safety-margin-usec = 8000 ; deferred-volume-extra-delay-usec = 0
#!/usr/bin/pulseaudio -nF # # This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. # This startup script is used only if PulseAudio is started per-user # (i.e. not in system mode) .fail ### Automatically restore the volume of streams and devices load-module module-device-restore load-module module-stream-restore load-module module-card-restore ### Automatically augment property information from .desktop files ### stored in /usr/share/application load-module module-augment-properties ### Should be after module-*-restore but before module-*-detect load-module module-switch-on-port-available ### Load audio drivers statically ### (it's probably better to not load these drivers manually, but instead ### use module-udev-detect -- see below -- for doing this automatically) #load-module module-alsa-sink #load-module module-alsa-source device=hw:1,0 #load-module module-oss device="/dev/dsp" sink_name=output source_name=input #load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input #load-module module-null-sink #load-module module-pipe-sink ### Automatically load driver modules depending on the hardware available .ifexists module-udev-detect.so load-module module-udev-detect .else ### Use the static hardware detection module (for systems that lack udev support) load-module module-detect .endif ### Automatically connect sink and source if JACK server is present .ifexists module-jackdbus-detect.so .nofail load-module module-jackdbus-detect channels=2 .fail .endif ### Automatically load driver modules for Bluetooth hardware .ifexists module-bluetooth-policy.so load-module module-bluetooth-policy .endif .ifexists module-bluetooth-discover.so load-module module-bluetooth-discover .endif ### Load several protocols .ifexists module-esound-protocol-unix.so load-module module-esound-protocol-unix .endif load-module module-native-protocol-unix ### Network access (may be configured with paprefs, so leave this commented ### here if you plan to use paprefs) #load-module module-esound-protocol-tcp #load-module module-native-protocol-tcp #load-module module-zeroconf-publish ### Load the RTP receiver module (also configured via paprefs, see above) #load-module module-rtp-recv ### Load the RTP sender module (also configured via paprefs, see above) #load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'" #load-module module-rtp-send source=rtp.monitor ### Load additional modules from GSettings. This can be configured with the paprefs tool. ### Please keep in mind that the modules configured by paprefs might conflict with manually ### loaded modules. .ifexists module-gsettings.so .nofail load-module module-gsettings .fail .endif ### Automatically restore the default sink/source when changed by the user ### during runtime ### NOTE: This should be loaded as early as possible so that subsequent modules ### that look up the default sink/source get the right value load-module module-default-device-restore ### Make sure we always have a sink around, even if it is a null sink. load-module module-always-sink ### Honour intended role device property load-module module-intended-roles ### Automatically suspend sinks/sources that become idle for too long load-module module-suspend-on-idle ### If autoexit on idle is enabled we want to make sure we only quit ### when no local session needs us anymore. .ifexists module-console-kit.so load-module module-console-kit .endif .ifexists module-systemd-login.so load-module module-systemd-login .endif ### Enable positioned event sounds load-module module-position-event-sounds ### Cork music/video streams when a phone stream is active load-module module-role-cork ### Modules to allow autoloading of filters (such as echo cancellation) ### on demand. module-filter-heuristics tries to determine what filters ### make sense, and module-filter-apply does the heavy-lifting of ### loading modules and rerouting streams. load-module module-filter-heuristics load-module module-filter-apply ### Make some devices default #set-default-sink output #set-default-source input
#!/usr/bin/pulseaudio -nF # # This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. # This startup script is used only if PulseAudio is started in system # mode. ### Automatically restore the volume of streams and devices load-module module-device-restore load-module module-stream-restore load-module module-card-restore ### Automatically load driver modules depending on the hardware available .ifexists module-udev-detect.so load-module module-udev-detect .else ### Use the static hardware detection module (for systems that lack udev/hal support) load-module module-detect .endif ### Load several protocols .ifexists module-esound-protocol-unix.so load-module module-esound-protocol-unix .endif load-module module-native-protocol-unix ### Automatically restore the default sink/source when changed by the user ### during runtime ### NOTE: This should be loaded as early as possible so that subsequent modules ### that look up the default sink/source get the right value load-module module-default-device-restore ### Make sure we always have a sink around, even if it is a null sink. load-module module-always-sink ### Automatically suspend sinks/sources that become idle for too long load-module module-suspend-on-idle ### Enable positioned event sounds load-module module-position-event-sounds
null Discard all samples (playback) or generate zero samples (capture) lavrate Rate Converter Plugin Using Libav/FFmpeg Library samplerate Rate Converter Plugin Using Samplerate Library speexrate Rate Converter Plugin Using Speex Resampler jack JACK Audio Connection Kit oss Open Sound System pulse PulseAudio Sound Server upmix Plugin for channel upmix (4,6,8) vdownmix Plugin for channel downmix (stereo) with a simple spacialization hw:CARD=HDMI,DEV=3 HDA ATI HDMI, HDMI 0 Direct hardware device without any conversions hw:CARD=HDMI,DEV=7 HDA ATI HDMI, HDMI 1 Direct hardware device without any conversions plughw:CARD=HDMI,DEV=3 HDA ATI HDMI, HDMI 0 Hardware device with all software conversions plughw:CARD=HDMI,DEV=7 HDA ATI HDMI, HDMI 1 Hardware device with all software conversions hdmi:CARD=HDMI,DEV=0 HDA ATI HDMI, HDMI 0 HDMI Audio Output hdmi:CARD=HDMI,DEV=1 HDA ATI HDMI, HDMI 1 HDMI Audio Output dmix:CARD=HDMI,DEV=3 HDA ATI HDMI, HDMI 0 Direct sample mixing device dmix:CARD=HDMI,DEV=7 HDA ATI HDMI, HDMI 1 Direct sample mixing device usbstream:CARD=HDMI HDA ATI HDMI USB Stream Output hw:CARD=Generic,DEV=0 HD-Audio Generic, ALC221 Analog Direct hardware device without any conversions plughw:CARD=Generic,DEV=0 HD-Audio Generic, ALC221 Analog Hardware device with all software conversions default:CARD=Generic HD-Audio Generic, ALC221 Analog Default Audio Device sysdefault:CARD=Generic HD-Audio Generic, ALC221 Analog Default Audio Device front:CARD=Generic,DEV=0 HD-Audio Generic, ALC221 Analog Front output / input surround21:CARD=Generic,DEV=0 HD-Audio Generic, ALC221 Analog 2.1 Surround output to Front and Subwoofer speakers surround40:CARD=Generic,DEV=0 HD-Audio Generic, ALC221 Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=Generic,DEV=0 HD-Audio Generic, ALC221 Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=Generic,DEV=0 HD-Audio Generic, ALC221 Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=Generic,DEV=0 HD-Audio Generic, ALC221 Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=Generic,DEV=0 HD-Audio Generic, ALC221 Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers dmix:CARD=Generic,DEV=0 HD-Audio Generic, ALC221 Analog Direct sample mixing device usbstream:CARD=Generic HD-Audio Generic USB Stream Output
Connection failure: Connection refused pa_context_connect() failed: Connection refused
Connection failure: Connection refused pa_context_connect() failed: Connection refused
_______________________________________________ pkg-pulseaudio-devel mailing list pkg-pulseaudio-devel@alioth-lists.debian.net https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/pkg-pulseaudio-devel