Hi, On Sun, Apr 20, 2014 at 8:00 PM, gpe92 <gp...@free.fr> wrote: > Package: pulseaudio > Version: 5.0-2 > Severity: normal > > Dear Maintainer, > > After updating PA to version 5.0-2 I've lost my sound. So I've > checked my connections and I've saw that my speakers were connected to > "rear speaker out" (black connector) instead of "port line out" > (green connector). Then I've connected the speakers at the green > connector and the sound is ok now. > So it seems that there is a problem with the connections > autodetection in PA5 because with PA4 and the speakers connected on > the black connector, there was any problem.
please run the following: pulseaudio -k ; pulseaudio -vvvv --log-target=file:pa.log --log-time If the command exits immediately, please retry a few times until the command stays running. After that, please try changing the speaker plug back and forth between the different connectors. Does pulseaudio pick up the change automatically? If so, then I'd say there is no problem ;). Maybe a one-time fluke? If not, please attach the pa.log file, and also the output of the command: pactl list sinks Please Run that command once for each connector you can plug your speakers to. Thanks for your report -- Saludos, Felipe Sateler _______________________________________________ pkg-pulseaudio-devel mailing list pkg-pulseaudio-devel@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/pkg-pulseaudio-devel
