I'm not up on the steps to do to get the debug (if you can list the command(s)
to run?).
BUT -
After the last reboot which has 252.12-1~deb12u1 I saw
lrwxrwxrwx 1 root root 9 2023-08-17 16:29 ttyUSB-nut -> gpiochip0
Which is wrong - So I unplugged and replugged the cable and looked again and
see:
lrwxrwxrwx 1 root root 15 2023-08-23 11:57 ttyUSB-nut -> bus/usb/001/003
Which is also wrong...
Nothing unusual in syslog:
2023-08-23T11:57:33.070249-05:00 localhost kernel: [502060.481676] ftdi_sio ttyUSB0: FTDI USB Serial Device converter
now disconnected from ttyUSB0
2023-08-23T11:57:33.070259-05:00 localhost kernel: [502060.481724] ftdi_sio
1-8:1.0: device disconnected
2023-08-23T11:57:35.772093-05:00 localhost kernel: [502063.187387] usb 1-8: new full-speed USB device number 3 using
xhci_hcd
2023-08-23T11:57:35.924035-05:00 localhost kernel: [502063.341331] usb 1-8: New USB device found, idVendor=0403,
idProduct=6001, bcdDevice= 6.00
2023-08-23T11:57:35.924054-05:00 localhost kernel: [502063.341345] usb 1-8: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
2023-08-23T11:57:35.924056-05:00 localhost kernel: [502063.341352] usb 1-8:
Product: FT232R USB UART
2023-08-23T11:57:35.924058-05:00 localhost kernel: [502063.341358] usb 1-8:
Manufacturer: FTDI
2023-08-23T11:57:35.924060-05:00 localhost kernel: [502063.341363] usb 1-8:
SerialNumber: AJV9MKOY
2023-08-23T11:57:35.928058-05:00 localhost kernel: [502063.345376] ftdi_sio 1-8:1.0: FTDI USB Serial Device converter
detected
2023-08-23T11:57:35.928077-05:00 localhost kernel: [502063.345482] usb 1-8:
Detected FT232R
2023-08-23T11:57:35.928080-05:00 localhost kernel: [502063.346643] usb 1-8: FTDI USB Serial Device converter now
attached to ttyUSB0
--
--------------------------------------------------------------------------------
Karl Schmidt EMail k...@lrak.net
3209 West 9th Street Ph (785) 841-3089
Lawrence, KS 66049
Being wrong, is the natural state of experts.
-Malcolm Kendrick
--------------------------------------------------------------------------------
