Your message dated Sat, 10 Oct 2009 22:55:59 +0000
with message-id <[email protected]>
and subject line Bug#525222: fixed in thunar-volman 0.3.80-3
has caused the Debian Bug report #525222,
regarding USB devices do not trigger any response from hal - XFCE
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)


-- 
525222: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=525222
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Subject: USB devices do not trigger any response from hal - XFCE
Package: hal
Version: 0.5.11-8
Severity: important

Additional to bug #476260:

I run XFCE. A few days ago, HAL stopped automounting devices which identify as
USB mass storage. A card reader still automounts removable memory cards.
Attaching a USB memory stick, or a Nokia which is identified as a USB memory
stick, does not work.

Running # hald --daemon=no --verbose=yes 2>&1

Results in absolutely no response when the USB device is plugged in.

dmesg says:

usb 5-2: new full speed USB device using uhci_hcd and address 11
usb 5-2: configuration #1 chosen from 1 choice
scsi11 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 11
usb-storage: waiting for device to settle before scanning
scsi 11:0:0:0: Direct-Access     USBDisk  RunDisk          1.00 PQ: 0 ANSI: 2
sd 11:0:0:0: [sdf] 2002000 512-byte hardware sectors: (1.02 GB/977 MiB)
sd 11:0:0:0: [sdf] Write Protect is off
sd 11:0:0:0: [sdf] Mode Sense: 0b 00 00 08
sd 11:0:0:0: [sdf] Assuming drive cache: write through
sd 11:0:0:0: [sdf] 2002000 512-byte hardware sectors: (1.02 GB/977 MiB)
sd 11:0:0:0: [sdf] Write Protect is off
sd 11:0:0:0: [sdf] Mode Sense: 0b 00 00 08
sd 11:0:0:0: [sdf] Assuming drive cache: write through
 sdf: sdf1
sd 11:0:0:0: [sdf] Attached SCSI removable disk
sd 11:0:0:0: Attached scsi generic sg5 type 0
usb-storage: device scan complete


Mounting manually works fine.

-- System Information:
Debian Release: squeeze/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: i386 (i686)

Kernel: Linux 2.6.28.2
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/bash

Versions of packages hal depends on:
ii  adduser                     3.110        add and remove users and groups
ii  dbus                        1.2.12-1     simple interprocess messaging syst
ii  hal-info                    20090309-1   Hardware Abstraction Layer - fdi f
ii  libc6                       2.9-4        GNU C Library: Shared libraries
ii  libdbus-1-3                 1.2.12-1     simple interprocess messaging syst
ii  libdbus-glib-1-2            0.80-3       simple interprocess messaging syst
ii  libexpat1                   2.0.1-4      XML parsing C library - runtime li
ii  libgcc1                     1:4.3.3-3    GCC support library
ii  libglib2.0-0                2.20.0-2     The GLib library of C routines
ii  libhal-storage1             0.5.11-8     Hardware Abstraction Layer - share
ii  libhal1                     0.5.11-8     Hardware Abstraction Layer - share
ii  libsmbios2                  2.0.3.dfsg-1 Provide access to (SM)BIOS informa
ii  libstdc++6                  4.3.3-3      The GNU Standard C++ Library v3
ii  libusb-0.1-4                2:0.1.12-13  userspace USB programming library
ii  libvolume-id0               0.125-7      libvolume_id shared library
ii  lsb-base                    3.2-22       Linux Standard Base 3.2 init scrip
ii  mount                       2.13.1.1-1   Tools for mounting and manipulatin
ii  pciutils                    1:3.1.2-3    Linux PCI Utilities
ii  pm-utils                    1.2.4-2      utilities and scripts for power ma
ii  udev                        0.125-7      /dev/ and hotplug management daemo
ii  usbutils                    0.73-10      Linux USB utilities

Versions of packages hal recommends:
ii  eject           2.1.5+deb1+cvs20081104-5 ejects CDs and operates CD-Changer
ii  libsmbios-bin   2.0.3.dfsg-1             Provide access to (SM)BIOS informa

Versions of packages hal suggests:
ii  gnome-device-manager          0.2-3      GNOME device manager based on HAL

-- no debconf information



--- End Message ---
--- Begin Message ---
Source: thunar-volman
Source-Version: 0.3.80-3

We believe that the bug you reported is fixed in the latest version of
thunar-volman, which is due to be installed in the Debian FTP archive:

thunar-volman_0.3.80-3.diff.gz
  to pool/main/t/thunar-volman/thunar-volman_0.3.80-3.diff.gz
thunar-volman_0.3.80-3.dsc
  to pool/main/t/thunar-volman/thunar-volman_0.3.80-3.dsc
thunar-volman_0.3.80-3_amd64.deb
  to pool/main/t/thunar-volman/thunar-volman_0.3.80-3_amd64.deb



A summary of the changes between this version and the previous one is
attached.

Thank you for reporting the bug, which will now be closed.  If you
have further comments please address them to [email protected],
and the maintainer will reopen the bug report if appropriate.

Debian distribution maintenance software
pp.
Yves-Alexis Perez <[email protected]> (supplier of updated thunar-volman 
package)

(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing [email protected])


-----BEGIN PGP SIGNED MESSAGE-----
Hash: RIPEMD160

Format: 1.8
Date: Sat, 10 Oct 2009 17:42:24 +0200
Source: thunar-volman
Binary: thunar-volman
Architecture: source amd64
Version: 0.3.80-3
Distribution: unstable
Urgency: low
Maintainer: Debian Xfce Maintainers <[email protected]>
Changed-By: Yves-Alexis Perez <[email protected]>
Description: 
 thunar-volman - Thunar extension for volumes management
Closes: 525222
Changes: 
 thunar-volman (0.3.80-3) unstable; urgency=low
 .
   [ Evgeni Golov ]
   * Fix Vcs-* fields, they were missing 'trunk' in the path.
 .
   [ Yves-Alexis Perez ]
   * debian/control:
     - add dependency on hal.                                    closes: #525222
     - update standards version to 3.8.3.
   * debian/watch edited to track Xfce archive reorganisation.
Checksums-Sha1: 
 745199070c335c92af4f2bfea65532a1bddccb4b 1425 thunar-volman_0.3.80-3.dsc
 4ada57f75c443101c2a6865b9e57093c74c21e49 4129 thunar-volman_0.3.80-3.diff.gz
 b1a5585c456f2daaec542dcc1ce9db140cfcbe53 82414 thunar-volman_0.3.80-3_amd64.deb
Checksums-Sha256: 
 c907c07facd61821af439fb8380f65375834b2f380b490541a5f49cbc9ee7ed6 1425 
thunar-volman_0.3.80-3.dsc
 dae2e9a4f7680f1a2e20af7058a0110aa1f79585158f3542d8bc2cd2f55a1d36 4129 
thunar-volman_0.3.80-3.diff.gz
 95b6eac0f79b7b4d47081c68acd4ebdba8b50e4916e68dbd83e425f231edf713 82414 
thunar-volman_0.3.80-3_amd64.deb
Files: 
 884f2a4784072d456857e93779f981df 1425 xfce optional thunar-volman_0.3.80-3.dsc
 cbb3b006282785137105bc962ee3c8f0 4129 xfce optional 
thunar-volman_0.3.80-3.diff.gz
 cde0d632ac4b93819b36c145487aace2 82414 xfce optional 
thunar-volman_0.3.80-3_amd64.deb

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)

iEYEAREDAAYFAkrQrZoACgkQTUTAIMXAW67EEgCgk2hPMjUTFFJZ9zPUHV8jTkvn
Q0wAn13h2mFDK8/fS95FV6hLqCnNMwEb
=6kZX
-----END PGP SIGNATURE-----



--- End Message ---
_______________________________________________
Pkg-xfce-devel mailing list
[email protected]
http://lists.alioth.debian.org/mailman/listinfo/pkg-xfce-devel

Reply via email to