Hi Joe,
thanks for sending this patch, I've got some comments on it.
Joe Perches writes:
Use pr_warn not pr_warning.
Don't see any line, where you changed this…
Coalesce formats.
Argument aligning.
Remove superfluous parentheses.
Discussed inline.
Signed-off-by: Joe Perches <[email protected]>
---
drivers/platform/x86/acerhdf.c | 19 ++++++++-----------
1 files changed, 8 insertions(+), 11 deletions(-)
diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c
index 833c0ec..639db4d 100644
--- a/drivers/platform/x86/acerhdf.c
+++ b/drivers/platform/x86/acerhdf.c
@@ -262,12 +262,11 @@ static void acerhdf_change_fanstate(int state)
unsigned char cmd;
if (verbose)
- pr_notice("fan %s\n", (state == ACERHDF_FAN_OFF) ?
- "OFF" : "ON");
+ pr_notice("fan %s\n", state == ACERHDF_FAN_OFF ? "OFF" : "ON");
In my opinion the one with brackets is easier to read.
if ((state != ACERHDF_FAN_OFF) && (state != ACERHDF_FAN_AUTO)) {
pr_err("invalid fan state %d requested, setting to auto!\n",
- state);
+ state);
Is it written somewhere to use spaces instead of a tab in such cases? I like
tab more. (1)
state = ACERHDF_FAN_AUTO;
}
@@ -282,19 +281,18 @@ static void acerhdf_check_param(struct thermal_zone_device *thermal)
{
if (fanon > ACERHDF_MAX_FANON) {
pr_err("fanon temperature too high, set to %d\n",
- ACERHDF_MAX_FANON);
+ ACERHDF_MAX_FANON);
see (1). - but maybe one tab shall be removed.
fanon = ACERHDF_MAX_FANON;
}
if (kernelmode && prev_interval != interval) {
if (interval > ACERHDF_MAX_INTERVAL) {
pr_err("interval too high, set to %d\n",
- ACERHDF_MAX_INTERVAL);
+ ACERHDF_MAX_INTERVAL);
see (1).
interval = ACERHDF_MAX_INTERVAL;
}
if (verbose)
- pr_notice("interval changed to: %d\n",
- interval);
+ pr_notice("interval changed to: %d\n", interval);
I agree on this.
thermal->polling_delay = interval*1000;
prev_interval = interval;
}
@@ -605,8 +603,8 @@ static int acerhdf_check_hardware(void)
}
if (!bios_cfg) {
- pr_err("unknown (unsupported) BIOS version %s/%s/%s, "
- "please report, aborting!\n", vendor, product, version);
+ pr_err("unknown (unsupported) BIOS version %s/%s/%s, please report,
aborting!\n",
+ vendor, product, version);
disagree, as it exceeds 80 chars.
return -EINVAL;
}
@@ -616,8 +614,7 @@ static int acerhdf_check_hardware(void)
*/
if (!kernelmode) {
pr_notice("Fan control off, to enable do:\n");
- pr_notice("echo -n \"enabled\" > "
- "/sys/class/thermal/thermal_zone0/mode\n");
+ pr_notice("echo -n \"enabled\" >
/sys/class/thermal/thermal_zone0/mode\n");
disagree, as it exceeds 80 chars when using tabstop=8.
}
return 0;
--
1.7.6.405.gc1be0
--
kind regards,
--peter;
--
To unsubscribe from this list: send the line "unsubscribe platform-driver-x86"
in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
