Author: hawk Date: Thu Jun 22 11:38:55 2006 GMT Module: SOURCES Tag: LINUX_2_6 ---- Log message: - version 8.32.2.3 dated 27 Apr 2006, patch for kernel 2.6.17.1
---- Files affected: SOURCES: linux-2.6-sk98lin-8.32.2.3.patch (NONE -> 1.1.2.1) (NEW) ---- Diffs: ================================================================ Index: SOURCES/linux-2.6-sk98lin-8.32.2.3.patch diff -u /dev/null SOURCES/linux-2.6-sk98lin-8.32.2.3.patch:1.1.2.1 --- /dev/null Thu Jun 22 13:38:55 2006 +++ SOURCES/linux-2.6-sk98lin-8.32.2.3.patch Thu Jun 22 13:38:50 2006 @@ -0,0 +1,45141 @@ +diff -urN linux-2.6.17.orig/Documentation/networking/sk98lin.txt linux-2.6.17/Documentation/networking/sk98lin.txt +--- linux-2.6.17.orig/Documentation/networking/sk98lin.txt 2006-06-22 13:17:15.000000000 +0200 ++++ linux-2.6.17/Documentation/networking/sk98lin.txt 2006-04-27 11:43:44.000000000 +0200 +@@ -1,38 +1,56 @@ +-(C)Copyright 1999-2004 Marvell(R). +-All rights reserved +-=========================================================================== ++(C)Copyright 1999-2006 Marvell(R). ++All rights reserved. ++================================================================================ + +-sk98lin.txt created 13-Feb-2004 ++sk98lin.txt created 27-Apr-2006 + +-Readme File for sk98lin v6.23 +-Marvell Yukon/SysKonnect SK-98xx Gigabit Ethernet Adapter family driver for LINUX ++Readme File for sk98lin v8.32.2.3 ++Marvell Yukon/SysKonnect SK-98xx Gigabit Ethernet Adapter driver for LINUX + + This file contains + 1 Overview +- 2 Required Files +- 3 Installation +- 3.1 Driver Installation +- 3.2 Inclusion of adapter at system start +- 4 Driver Parameters +- 4.1 Per-Port Parameters +- 4.2 Adapter Parameters +- 5 Large Frame Support +- 6 VLAN and Link Aggregation Support (IEEE 802.1, 802.1q, 802.3ad) +- 7 Troubleshooting ++ 2 Supported Functions ++ 3 Required Files ++ 4 Installation ++ 4.1 Driver Installation ++ 4.2 Inclusion of adapter at system start ++ 5 Driver Parameters ++ 5.1 Per-Port Parameters ++ 5.2 Adapter Parameters ++ 6 Ethtool Support ++ 7 Large Frame Support ++ 8 VLAN and Link Aggregation Support (IEEE 802.1, 802.1q, 802.3ad) ++ 9 Wake on Lan support ++10 Troubleshooting + +-=========================================================================== ++================================================================================ + + + 1 Overview + =========== + +-The sk98lin driver supports the Marvell Yukon and SysKonnect +-SK-98xx/SK-95xx compliant Gigabit Ethernet Adapter on Linux. It has +-been tested with Linux on Intel/x86 machines. ++The sk98lin driver supports the Marvell Yukon, Yukon EC/FE, Yukon 2 ++and SysKonnect SK-98xx/SK-95xx compliant Gigabit Ethernet Adapter on Linux. ++It has been tested with Linux on Intel/x86, x86_64 and IA64 machines. + *** + ++2 Supported Functions ++====================== ++ ++The following functions are supported by the driver: + +-2 Required Files ++ NOTE 1: The hardware support depends on the used card ++ ++ - RX/TX HW Checksum ++ - Hardware interrupt moderation (static/dynamic) ++ - Transmit poll ++ - Zerocopy/Scatter-Gather ++ - Ethtool support ++ - Wake on Lan (Magic Packet only) (From suspend and APM only) ++ - DualNet ++ ++ ++3 Required Files + ================= + + The linux kernel source. +@@ -40,16 +58,14 @@ + *** + + +-3 Installation ++4 Installation + =============== + + It is recommended to download the latest version of the driver from the +-SysKonnect web site www.syskonnect.com. If you have downloaded the latest +-driver, the Linux kernel has to be patched before the driver can be +-installed. For details on how to patch a Linux kernel, refer to the +-patch.txt file. ++SysKonnect web site www.syskonnect.com. For details on Installation ++Instructions for sk98lin Driver, please refer to the README.txt file. + +-3.1 Driver Installation ++4.1 Driver Installation + ------------------------ + + The following steps describe the actions that are required to install +@@ -91,7 +107,7 @@ + with (M) + 5. Execute the command "make modules". + 6. Execute the command "make modules_install". +- The appropriate modules will be installed. ++ The appropiate modules will be installed. + 7. Reboot your system. + + +@@ -110,13 +126,13 @@ + + NOTE 1: If you have more than one Marvell Yukon or SysKonnect SK-98xx + adapter installed, the adapters will be listed as 'eth0', +- 'eth1', 'eth2', etc. +- For each adapter, repeat steps 3 and 4 below. ++ 'eth1', 'eth2', etc. ++ For each adapter, repeat steps 3 and 4 below. + + NOTE 2: If you have other Ethernet adapters installed, your Marvell + Yukon or SysKonnect SK-98xx adapter will be mapped to the +- next available number, e.g. 'eth1'. The mapping is executed +- automatically. ++ next available number, e.g. 'eth1'. The mapping is executed ++ automatically. + The module installation message (displayed either in a system + log file or on the console) prints a line for each adapter + found containing the corresponding 'ethX'. +@@ -153,7 +169,7 @@ + 1. Execute the command "ifconfig eth0 down". + 2. Execute the command "rmmod sk98lin". + +-3.2 Inclusion of adapter at system start ++4.2 Inclusion of adapter at system start + ----------------------------------------- + + Since a large number of different Linux distributions are +@@ -165,7 +181,8 @@ + + *** + +-4 Driver Parameters ++ ++5 Driver Parameters + ==================== + + Parameters can be set at the command line after the module has been +@@ -174,7 +191,7 @@ + to the driver module. + + If you use the kernel module loader, you can set driver parameters +-in the file /etc/modprobe.conf (or /etc/modules.conf in 2.4 or earlier). ++in the file /etc/modules.conf (or old name: /etc/conf.modules). + To set the driver parameters in this file, proceed as follows: + + 1. Insert a line of the form : +@@ -208,7 +225,7 @@ + more adapters, adjust this and recompile. + + +-4.1 Per-Port Parameters ++5.1 Per-Port Parameters + ------------------------ + + These settings are available for each port on the adapter. +@@ -245,7 +262,7 @@ + This parameters is only relevant if auto-negotiation for this port is + not set to "Sense". If auto-negotiation is set to "On", all three values + are possible. If it is set to "Off", only "Full" and "Half" are allowed. +-This parameter is useful if your link partner does not support all ++This parameter is usefull if your link partner does not support all + possible combinations. + + Flow Control +@@ -282,13 +299,13 @@ + with this parameter. + + +-4.2 Adapter Parameters ++5.2 Adapter Parameters + ----------------------- + +-Connection Type (SK-98xx V2.0 copper adapters only) ++Connection Type (for copper adapters only) + --------------- + Parameter: ConType +-Values: Auto, 100FD, 100HD, 10FD, 10HD ++Values: Auto, 1000FD, 100FD, 100HD, 10FD, 10HD + Default: Auto + + The parameter 'ConType' is a combination of all five per-port parameters +@@ -302,6 +319,7 @@ + ConType | DupCap AutoNeg FlowCtrl Role Speed + ----------+------------------------------------------------------ + Auto | Both On SymOrRem Auto Auto ++ 1000FD | Full Off None Auto (ignored) 1000 + 100FD | Full Off None Auto (ignored) 100 + 100HD | Half Off None Auto (ignored) 100 + 10FD | Full Off None Auto (ignored) 10 +@@ -379,7 +397,6 @@ + is tremendous. On the other hand, selecting a very short moderation time might + compensate the use of any moderation being applied. + +- + Preferred Port + -------------- + Parameter: PrefPort +@@ -394,7 +411,7 @@ + ------------------------------------------------ + Parameter: RlmtMode + Values: CheckLinkState,CheckLocalPort, CheckSeg, DualNet +-Default: CheckLinkState ++Default: CheckLinkState (DualNet on dual port adapters) + + RLMT monitors the status of the port. If the link of the active port + fails, RLMT switches immediately to the standby link. The virtual link is +@@ -429,10 +446,94 @@ + where a network path between the ports on one adapter exists. + Moreover, they are not designed to work where adapters are connected + back-to-back. ++ ++LowLatency ++---------- ++Parameter: LowLatency ++Values: On, Off ++Default: Off ++ ++This is used to reduce the packet latency time of the adapter. Setting the ++LowLatency parameter to 'On' forces the adapter to pass any received packet ++immediately to upper network layers and to send out any transmit packet as ++fast as possible. ++ ++NOTE 1: The system load increases if LowLatency is set to 'On' and a lot ++ of data packets are transmitted and received. ++ ++NOTE 2: This parameter is only used on adapters which are based on ++ PCI Express compatible chipsets. + *** + + +-5 Large Frame Support ++6 Ethtool Support ++================== ++ ++The sk98lin driver provides built-in ethtool support. The ethtool ++can be used to display or modify interface specific configurations. ++ ++Ethtool commands are invoked using a single parameter which reflects ++the requested ethtool command plus an optional number of parameters ++which belong to the desired command. ++ ++It is not the intention of this section to explain the ethtool command ++line tool and all its options. For further information refer to the ++manpage of the ethtool. This sections describes only the sk98lin ++driver supported ethtool commands. ++ ++Pause Parameters ++---------------- ++Query command: -a ++Set command: -A [autoneg on|off] [rx on|off] [tx on|off] ++Sample: ethtool -A eth0 rx off tx off ++ ++Coalescing Parameters ++--------------------- ++Query command: -c ++Set command: -C [sample-interval I] ++ [rx-usecs N] [tx-usecs N] ++ [rx-usecs-low N] [tx-usecs-low N] ++ [rx-usecs-high N] [tx-usecs-high N] ++Parameter: I = Length of sample interval, in seconds ++ (supported values range from 1...10) ++ N = Length of coalescing interval, in microseconds ++ (supported values range from 25...33,333) ++Sample: ethtool -C eth2 rx-usecs 500 tx-usecs 500 ++ ++NOTE: The sk98lin driver does not support different settings ++ for the rx and tx interrupt coalescing parameters. ++ ++Driver Information ++------------------ ++Query command: -i ++Sample: ethtool -i eth1 ++ ++Checksumming Parameters ++----------------------- ++Query command: -k ++Set command: -K [rx on|off] [tx on|off] [sg on|off] ++Sample: ethtool -K eth0 sg off ++ ++Locate NIC Command ++------------------ ++Query command: -p [N] ++Parameter: N = Amount of time to perform locate NIC command, in seconds ++Sample: ethtool -p 10 eth1 ++ ++Driver-specific Statistics ++-------------------------- ++Query command: -S ++Sample: ethtool -S eth0 ++ ++Setting Parameters ++------------------ ++Set command: -s [speed 10|100|1000] [duplex half|full] ++ [autoneg on|off] [wol gd] ++Sample: ethtool -s eth2 wol d ++*** ++ ++ ++7 Large Frame Support + ====================== + + The driver supports large frames (also called jumbo frames). Using large +@@ -444,10 +545,10 @@ + ifconfig eth0 mtu 9000 + This will only work if you have two adapters connected back-to-back + or if you use a switch that supports large frames. When using a switch, +-it should be configured to allow large frames and auto-negotiation should +-be set to OFF. The setting must be configured on all adapters that can be +-reached by the large frames. If one adapter is not set to receive large +-frames, it will simply drop them. ++it should be configured to allow large frames. The setting must be ++configured on all adapters that can be reached by the large frames. ++If one adapter is not set to receive large frames, it will simply drop ++them. + + You can switch back to the standard ethernet frame size by executing the + following command: +@@ -459,7 +560,7 @@ + *** + + +-6 VLAN and Link Aggregation Support (IEEE 802.1, 802.1q, 802.3ad) ++8 VLAN and Link Aggregation Support (IEEE 802.1, 802.1q, 802.3ad) + ================================================================== + + The Marvell Yukon/SysKonnect Linux drivers are able to support VLAN and +@@ -477,8 +578,21 @@ + cause problems when unloading the driver. + + +-7 Troubleshooting +-================== ++9 Wake on Lan support ++====================== ++ ++The sk98lin driver supports wake up from suspend mode with MagicPacket ++on APM systems. Wake on Lan support is enabled by default. To disable it ++please use the ethtool. ++ ++NOTE 1: APM support has to be enabled in BIOS and in the kernel. ++ ++NOTE 2: Refer to the kernel documentation for additional requirements ++ regarding APM support. ++ ++ ++10 Troubleshooting ++=================== + + If any problems occur during the installation process, check the + following list: +diff -urN linux-2.6.17.orig/drivers/net/Kconfig linux-2.6.17/drivers/net/Kconfig +--- linux-2.6.17.orig/drivers/net/Kconfig 2006-06-22 13:17:16.000000000 +0200 ++++ linux-2.6.17/drivers/net/Kconfig 2006-06-22 13:21:21.000000000 +0200 +@@ -2182,17 +2182,26 @@ + depends on PCI + ---help--- + Say Y here if you have a Marvell Yukon or SysKonnect SK-98xx/SK-95xx +- compliant Gigabit Ethernet Adapter. +- +- This driver supports the original Yukon chipset. A cleaner driver is +- also available (skge) which seems to work better than this one. +- +- This driver does not support the newer Yukon2 chipset. A seperate +- driver, sky2, is provided to support Yukon2-based adapters. +- +- The following adapters are supported by this driver: ++ compliant Gigabit Ethernet Adapter. The following adapters are supported ++ by this driver: + - 3Com 3C940 Gigabit LOM Ethernet Adapter + - 3Com 3C941 Gigabit LOM Ethernet Adapter ++ - 88E8021 Marvell 1000 Mbit PCI-X, single Port Copper ++ - 88E8021 Marvell 1000 Mbit PCI-X, single Port Fiber LX ++ - 88E8021 Marvell 1000 Mbit PCI-X, single Port Fiber SX ++ - 88E8022 Marvell 1000 Mbit PCI-X, dual Port Copper ++ - 88E8022 Marvell 1000 Mbit PCI-X, dual Port Copper (Gateway) ++ - 88E8022 Marvell 1000 Mbit PCI-X, dual Port Fiber LX ++ - 88E8022 Marvell 1000 Mbit PCI-X, dual Port Fiber SX ++ - 88E8061 Marvell 1000 Mbit PCI-E, single Port Copper ++ - 88E8061 Marvell 1000 Mbit PCI-E, single Port Fiber LX ++ - 88E8061 Marvell 1000 Mbit PCI-E, single Port Fiber SX ++ - 88E8062 Marvell 1000 Mbit PCI-E, dual Port Copper ++ - 88E8062 Marvell 1000 Mbit PCI-E, dual Port Copper (Gateway) ++ - 88E8062 Marvell 1000 Mbit PCI-E, dual Port Fiber LX ++ - 88E8062 Marvell 1000 Mbit PCI-E, dual Port Fiber SX ++ - Abocom EFE3K - 10/100 Ethernet Expresscard ++ - Abocom EGE5K - Giga Ethernet Expresscard + - Allied Telesyn AT-2970LX Gigabit Ethernet Adapter + - Allied Telesyn AT-2970LX/2SC Gigabit Ethernet Adapter + - Allied Telesyn AT-2970SX Gigabit Ethernet Adapter +@@ -2202,31 +2211,83 @@ + - Allied Telesyn AT-2971SX Gigabit Ethernet Adapter + - Allied Telesyn AT-2971T Gigabit Ethernet Adapter + - Belkin Gigabit Desktop Card 10/100/1000Base-T Adapter, Copper RJ-45 ++ - DGE-530T Gigabit Ethernet Adapter ++ - DGE-560SX Single fiber Gigabit Ethernet Adapter ++ - DGE-560T Gigabit Ethernet Adapter + - EG1032 v2 Instant Gigabit Network Adapter + - EG1064 v2 Instant Gigabit Network Adapter +- - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Abit) +- - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Albatron) +- - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Asus) +- - Marvell 88E8001 Gigabit LOM Ethernet Adapter (ECS) +- - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Epox) +- - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Foxconn) +- - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Gigabyte) +- - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Iwill) +- - Marvell 88E8050 Gigabit LOM Ethernet Adapter (Intel) ++ - Marvell 88E8001 Gigabit Ethernet Controller (Abit) ++ - Marvell 88E8001 Gigabit Ethernet Controller (Albatron) ++ - Marvell 88E8001 Gigabit Ethernet Controller (Asus) ++ - Marvell 88E8001 Gigabit Ethernet Controller (Chaintech) ++ - Marvell 88E8001 Gigabit Ethernet Controller (ECS) ++ - Marvell 88E8001 Gigabit Ethernet Controller (Epox) ++ - Marvell 88E8001 Gigabit Ethernet Controller (Foxconn) ++ - Marvell 88E8001 Gigabit Ethernet Controller (Gigabyte) ++ - Marvell 88E8001 Gigabit Ethernet Controller (Iwill) ++ - Marvell 88E8035 Fast Ethernet Controller (LGE) ++ - Marvell 88E8035 Fast Ethernet Controller (Toshiba) ++ - Marvell 88E8036 Fast Ethernet Controller (Arima) ++ - Marvell 88E8036 Fast Ethernet Controller (Compal) ++ - Marvell 88E8036 Fast Ethernet Controller (Inventec) ++ - Marvell 88E8036 Fast Ethernet Controller (LGE) ++ - Marvell 88E8036 Fast Ethernet Controller (Mitac) ++ - Marvell 88E8036 Fast Ethernet Controller (Panasonic) ++ - Marvell 88E8036 Fast Ethernet Controller (Quanta) ++ - Marvell 88E8036 Fast Ethernet Controller (Toshiba) ++ - Marvell 88E8036 Fast Ethernet Controller (Wistron) ++ - Marvell 88E8050 Gigabit Ethernet Controller (Gateway) ++ - Marvell 88E8050 Gigabit Ethernet Controller (Intel) ++ - Marvell 88E8052 Gigabit Ethernet Controller (ASRock) ++ - Marvell 88E8052 Gigabit Ethernet Controller (Aopen) ++ - Marvell 88E8052 Gigabit Ethernet Controller (Asus) ++ - Marvell 88E8052 Gigabit Ethernet Controller (Gateway) ++ - Marvell 88E8052 Gigabit Ethernet Controller (Gigabyte) ++ - Marvell 88E8052 Gigabit Ethernet Controller (MSI) ++ - Marvell 88E8052 Gigabit Ethernet Controller (Wistron) ++ - Marvell 88E8053 Gigabit Ethernet Controller (ASRock) ++ - Marvell 88E8053 Gigabit Ethernet Controller (Albatron) ++ - Marvell 88E8053 Gigabit Ethernet Controller (Aopen) ++ - Marvell 88E8053 Gigabit Ethernet Controller (Arima) ++ - Marvell 88E8053 Gigabit Ethernet Controller (Asus) ++ - Marvell 88E8053 Gigabit Ethernet Controller (Chaintech) ++ - Marvell 88E8053 Gigabit Ethernet Controller (Clevo) ++ - Marvell 88E8053 Gigabit Ethernet Controller (Compal) ++ - Marvell 88E8053 Gigabit Ethernet Controller (DFI) ++ - Marvell 88E8053 Gigabit Ethernet Controller (ECS) ++ - Marvell 88E8053 Gigabit Ethernet Controller (Epox) ++ - Marvell 88E8053 Gigabit Ethernet Controller (Gigabyte) ++ - Marvell 88E8053 Gigabit Ethernet Controller (Inventec) ++ - Marvell 88E8053 Gigabit Ethernet Controller (LGE) ++ - Marvell 88E8053 Gigabit Ethernet Controller (MSI) ++ - Marvell 88E8053 Gigabit Ethernet Controller (Mitac) ++ - Marvell 88E8053 Gigabit Ethernet Controller (Panasonic) ++ - Marvell 88E8053 Gigabit Ethernet Controller (Quanta) ++ - Marvell 88E8053 Gigabit Ethernet Controller (SOYO) ++ - Marvell 88E8053 Gigabit Ethernet Controller (Shuttle) ++ - Marvell 88E8053 Gigabit Ethernet Controller (Toshiba) ++ - Marvell 88E8053 Gigabit Ethernet Controller (Trigem) ++ - Marvell RDK-8001 + - Marvell RDK-8001 Adapter + - Marvell RDK-8002 Adapter ++ - Marvell RDK-8003 + - Marvell RDK-8003 Adapter + - Marvell RDK-8004 Adapter + - Marvell RDK-8006 Adapter + - Marvell RDK-8007 Adapter + - Marvell RDK-8008 Adapter + - Marvell RDK-8009 Adapter +- - Marvell RDK-8010 Adapter ++ - Marvell RDK-8010 + - Marvell RDK-8011 Adapter + - Marvell RDK-8012 Adapter +- - Marvell RDK-8052 Adapter +- - Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (32 bit) +- - Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (64 bit) ++ - Marvell RDK-8035 ++ - Marvell RDK-8036 ++ - Marvell RDK-8052 ++ - Marvell RDK-8053 ++ - Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Controller (32 bit) ++ - Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Controller (64 bit) ++ - Marvell Yukon-EC Ultra, no ASF (Battery Power Service Support) ++ - Marvell Yukon-FE Fast Ethernet, Reduced Battery Power Service Support) + - N-Way PCI-Bus Giga-Card 1000/100/10Mbps(L) + - SK-9521 10/100/1000Base-T Adapter + - SK-9521 V2.0 10/100/1000Base-T Adapter +@@ -2246,21 +2307,36 @@ + - SK-9871 Gigabit Ethernet Server Adapter (SK-NET GE-ZX) + - SK-9871 V2.0 Gigabit Ethernet 1000Base-ZX Adapter + - SK-9872 Gigabit Ethernet Server Adapter (SK-NET GE-ZX dual link) ++ - SK-9S21 Server Adapter ++ - SK-9S22 Server Adapter ++ - SK-9S24 Server Adapter ++ - SK-9S34 Server Adapter ++ - SK-9S81 Server Adapter ++ - SK-9S82 Server Adapter ++ - SK-9S91 Server Adapter ++ - SK-9S92 Server Adapter + - SMC EZ Card 1000 (SMC9452TXV.2) + + The adapters support Jumbo Frames. + The dual link adapters support link-failover and dual port features. + Both Marvell Yukon and SysKonnect SK-98xx/SK-95xx adapters support + the scatter-gather functionality with sendfile(). Please refer to +- <file:Documentation/networking/sk98lin.txt> for more information about ++ Documentation/networking/sk98lin.txt for more information about + optional driver parameters. + Questions concerning this driver may be addressed to: +- <[EMAIL PROTECTED]> ++ [EMAIL PROTECTED] + + If you want to compile this driver as a module ( = code which can be + inserted in and removed from the running kernel whenever you want), +- say M here and read <file:Documentation/kbuild/modules.txt>. The module will +- be called sk98lin. This is recommended. ++ say M here and read Documentation/modules.txt. This is recommended. ++ The module will be called sk98lin. This is recommended. ++ ++config SK98LIN_NAPI ++ bool "Use Rx polling (NAPI)" ++ depends on SK98LIN ++ help ++ NAPI is a new driver API designed to reduce CPU and interrupt load ++ when the driver is receiving lots of packets from the card. + + config VIA_VELOCITY + tristate "VIA Velocity support" +diff -urN linux-2.6.17.orig/drivers/net/sk98lin/Makefile linux-2.6.17/drivers/net/sk98lin/Makefile +--- linux-2.6.17.orig/drivers/net/sk98lin/Makefile 2006-06-22 13:17:16.000000000 +0200 ++++ linux-2.6.17/drivers/net/sk98lin/Makefile 2006-04-27 11:43:45.000000000 +0200 +@@ -1,6 +1,59 @@ ++#****************************************************************************** + # +-# Makefile for the SysKonnect SK-98xx device driver. ++# Name: skge.c ++# Project: GEnesis, PCI Gigabit Ethernet Adapter ++# Version: $Revision$ ++# Date: $Date$ ++# Purpose: The main driver source module + # ++#****************************************************************************** ++ ++#****************************************************************************** ++# ++# (C)Copyright 1998-2002 SysKonnect GmbH. ++# (C)Copyright 2002-2005 Marvell. ++# ++# Makefile for Marvell Yukon chipset and SysKonnect Gigabit Ethernet ++# Server Adapter driver. (Kernel 2.6) ++# ++# Author: Mirko Lindner ([EMAIL PROTECTED]) ++# Ralph Roesler ([EMAIL PROTECTED]) ++# ++# Address all question to: [EMAIL PROTECTED] ++# ++# This program is free software; you can redistribute it and/or modify ++# it under the terms of the GNU General Public License as published by ++# the Free Software Foundation; either version 2 of the License, or ++# (at your option) any later version. ++# ++# The information in this file is provided "AS IS" without warranty. ++# ++#****************************************************************************** ++ ++#****************************************************************************** ++# ++# History: ++# ++# $Log$ ++# Revision 1.1.2.1 2006/06/22 11:38:50 hawk ++# - version 8.32.2.3 dated 27 Apr 2006, patch for kernel 2.6.17.1 ++# ++# Revision 1.9.2.1 2005/04/11 09:01:18 mlindner ++# Fix: Copyright year changed ++# ++# Revision 1.9 2004/07/13 15:54:50 rroesler ++# Add: file skethtool.c ++# Fix: corrected header regarding copyright ++# Fix: minor typos corrected ++# <<Diff was trimmed, longer than 597 lines>> _______________________________________________ pld-cvs-commit mailing list pld-cvs-commit@lists.pld-linux.org http://lists.pld-linux.org/mailman/listinfo/pld-cvs-commit
