$ /sbin/lspci -v -s 0:11.0 00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] (prog-if 01 [AHCI 1.0]) Subsystem: ASUSTeK Computer Inc. Device 1117 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 22 I/O ports at c000 [size=8] I/O ports at b000 [size=4] I/O ports at a000 [size=8] I/O ports at 9000 [size=4] I/O ports at 8000 [size=16] Memory at fbcff800 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci
2011/1/13 Artur Frysiak <wi...@pld-linux.org>: > On Wed, Jan 12, 2011 at 22:21, Zsolt Udvari <udvzs...@gmail.com> wrote: >>> I set SATA controller to AHCI mode in BIOS. >> Same warning... My laptop works well, without any problem, but this >> warning message is a bit annoying (and not beautiful :)). > > Please show: > $ lspci -v -s 0:11.0 > -- > Artur Frysiak > _______________________________________________ > pld-devel-en mailing list > pld-devel-en@lists.pld-linux.org > http://lists.pld-linux.org/mailman/listinfo/pld-devel-en > _______________________________________________ pld-devel-en mailing list pld-devel-en@lists.pld-linux.org http://lists.pld-linux.org/mailman/listinfo/pld-devel-en