2008/10/26 Fryderyk Dziarmagowski <[EMAIL PROTECTED]>: > On Sun, 26 Oct 2008 13:27:03 +0100 > Pawel Kwiatkowski <[EMAIL PROTECTED]> wrote: > >> Dnia 2008-10-26, nie o godzinie 11:08 +0100, Łukasz Maśko pisze: >> > Co się zmieniło w nowym udev? Po update nie wstała mi karta sieciowa wifi >> > (ipw2200, brak urządzenia chociaż moduł został załadowany), alsa też nie >> > wstała. Zrobiłem na razie downgrade. Co sprawdzić/zmienić, żeby zadziałało? >> >> Potwierdzam, ale to raczej problem znowym hal-em którego wymaga ten >> udev: >> >> # lshal | grep eth0 >> >> nic nie zwraca > > a co zwraca udevinfo -a -p /sys/class/net/eth0 > ?
[EMAIL PROTECTED] SPECS]$ udevinfo -a -p /sys/class/net/eth0 bash: /usr/bin/udevinfo: Nie ma takiego pliku ani katalogu [EMAIL PROTECTED] ~]# udevadm info -a -p /sys/class/net/eth0 Udevinfo starts with the device specified by the devpath and then walks up the chain of parent devices. It prints for every device found, all possible attributes in the udev rules key format. A rule to match, can be composed by the attributes of the device and the attributes from one single parent device. looking at device '/devices/pci0000:00/0000:00:1e.0/0000:06:07.0/net/eth0': KERNEL=="eth0" SUBSYSTEM=="net" DRIVER=="" ATTR{addr_len}=="6" ATTR{dev_id}=="0x0" ATTR{iflink}=="4" ATTR{ifindex}=="4" ATTR{features}=="0x180" ATTR{type}=="1" ATTR{link_mode}=="0" ATTR{address}=="00:1b:fc:3a:80:4f" ATTR{broadcast}=="ff:ff:ff:ff:ff:ff" ATTR{operstate}=="down" ATTR{mtu}=="1500" ATTR{flags}=="0x1002" ATTR{tx_queue_len}=="1000" looking at parent device '/devices/pci0000:00/0000:00:1e.0/0000:06:07.0': KERNELS=="0000:06:07.0" SUBSYSTEMS=="pci" DRIVERS=="r8169" ATTRS{vendor}=="0x10ec" ATTRS{device}=="0x8167" ATTRS{subsystem_vendor}=="0x1043" ATTRS{subsystem_device}=="0x1345" ATTRS{class}=="0x020000" ATTRS{irq}=="18" ATTRS{local_cpus}=="ffff" ATTRS{local_cpulist}=="0-15" ATTRS{modalias}=="pci:v000010ECd00008167sv00001043sd00001345bc02sc00i00" ATTRS{enable}=="1" ATTRS{broken_parity_status}=="0" ATTRS{msi_bus}=="" looking at parent device '/devices/pci0000:00/0000:00:1e.0': KERNELS=="0000:00:1e.0" SUBSYSTEMS=="pci" DRIVERS=="" ATTRS{vendor}=="0x8086" ATTRS{device}=="0x2448" ATTRS{subsystem_vendor}=="0x0000" ATTRS{subsystem_device}=="0x0000" ATTRS{class}=="0x060401" ATTRS{irq}=="0" ATTRS{local_cpus}=="ffff" ATTRS{local_cpulist}=="0-15" ATTRS{modalias}=="pci:v00008086d00002448sv00000000sd00000000bc06sc04i01" ATTRS{enable}=="1" ATTRS{broken_parity_status}=="0" ATTRS{msi_bus}=="1" looking at parent device '/devices/pci0000:00': KERNELS=="pci0000:00" SUBSYSTEMS=="" DRIVERS=="" -- Patryk Zawadzki _______________________________________________ pld-devel-pl mailing list pld-devel-pl@lists.pld-linux.org http://lists.pld-linux.org/mailman/listinfo/pld-devel-pl