Dnia wtorek, 22 listopada 2005 18:43, Grzegorz Pietrzak napisał: [...] > W celach testowych uruchomiłem saned z prawmi root-a i zaczęło działać > więc to tylko uprawnienia... > I gdzie mam szukać błędu?!?...
Zastopuj inetd (/etc/init.d/rc-inetd stop) i odpal ręcznie saneda na jego prawach z debugiem (sudo -u saned "/usr/sbin/saned -d256") i spróbuj zeskanować coś, ewentualnie wykryć skaner. Może to ci coś podpowie. Przy okazji podeślij to tutaj. U mnie zapuszczenie scanimage -L z komputera w sieci daje w tej sytuacji taki efekt: $ sudo -u saned saned -d256 [saned] main: starting debug mode (level 256) [saned] main: trying to get port for service `sane-port' (getaddrinfo) [saned] main: [0] socket () using IPv6 [saned] main: [0] setsockopt () [saned] main: [0] bind () to port 6566 [saned] main: [0] listen () [saned] main: [1] socket () using IPv4 [saned] main: [1] setsockopt () [saned] main: [1] bind () to port 6566 [saned] main: [1] bind failed: Address already in use [saned] main: waiting for control connection [saned] saned (AF-indep+IPv6) from sane-backends 1.0.16 ready [saned] check_host: detected an IPv4-mapped address [saned] check_host: access by remote host: ::ffff:10.0.0.8 [saned] check_host: remote host is not IN_LOOPBACK nor IN6_LOOPBACK [saned] check_host: local hostname: ciri [saned] check_host: local hostname(s) (from DNS): ciri.ed.pl [saned] check_host: local hostname(s) (from DNS): (null) [saned] check_host: local hostname(s) (from DNS): (null) [saned] check_host: remote host doesn't have same addr as local [saned] check_host: opening config file: /etc/hosts.equiv [saned] check_host: can't open config file: /etc/hosts.equiv (No such file or directory) [saned] check_host: opening config file: saned.conf [saned] check_host: config file line: `#' [saned] check_host: config file line: `# saned.conf' [saned] check_host: config file line: `#' [saned] check_host: config file line: `# The contents of the saned.conf file is a list of host names, IP' [saned] check_host: config file line: `# addresses or IP subnets (CIDR notation) that are permitted to use local' [saned] check_host: config file line: `# SANE devices. IPv6 addresses must be enclosed in brackets, and should' [saned] check_host: config file line: `# always be specified in their compressed form.' [saned] check_host: config file line: `#' [saned] check_host: config file line: `# The hostname matching is not case-sensitive.' [saned] check_host: config file line: `#' [saned] check_host: config file line: `#scan-client.somedomain.firm' [saned] check_host: config file line: `#192.168.0.1' [saned] check_host: config file line: `#192.168.0.1/29' [saned] check_host: config file line: `#[2001:7a8:185e::42:12]' [saned] check_host: config file line: `#[2001:7a8:185e::42:12]/64' [saned] check_host: config file line: `#' [saned] check_host: config file line: `# NOTE: /etc/inetd.conf (or /etc/xinetd.conf) and' [saned] check_host: config file line: `# /etc/services must also be properly configured to start' [saned] check_host: config file line: `# the saned daemon as documented in saned(1), services(4)' [saned] check_host: config file line: `# and inetd.conf(4) (or xinetd.conf(5)).' [saned] check_host: config file line: `127.0.0.1' [saned] check_host: DNS lookup returns IP address: 127.0.0.1 [saned] check_host: DNS lookup returns IP address: 127.0.0.1 [saned] check_host: DNS lookup returns IP address: 127.0.0.1 [saned] check_host: config file line: `10.0.0.1/24' [saned] check_host: subnet with base IP = 10.0.0.1, CIDR netmask = 24 [saned] check_host: access granted from IP address 10.0.0.8 (in subnet 10.0.0.1/24) [saned] init: access granted [saned] init: access granted to ed@::ffff:10.0.0.8 [saned] process_request: waiting for request [saned] process_request: got request 1 [saned] process_request: waiting for request [saned] process_request: got request 10 [saned] quit: exiting Jeśli nie pomoże, to następnym krokiem będzie sudo -u saned strace saned -d, może to coś pomoże. -- Łukasz Maśko GG: 2441498 _o) Lukasz.Masko(at)ipipan.waw.pl ICQ: 146553537 /\\ Registered Linux User #61028 JID: [EMAIL PROTECTED] _\_V _______________________________________________ pld-users-pl mailing list pld-users-pl@lists.pld-linux.org http://lists.pld-linux.org/mailman/listinfo/pld-users-pl
