|
Stanisław Kamiński napisał(a): U mnie jest cos takiego:Coś takiego: #modprobe ath_pci #dmesg [ciach] ath_hal: 0.9.16.13 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413, DFS) wlan: 0.8.4.2 (Atheros/multi-bss) ath_rate_sample: 1.2 ath_pci: 0.9.4.5 (Atheros/multi-bss) Karta na chipsecie AR5212: #dmesg | grep ath ath_hal: 0.9.16.13 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413, DFS) ath_rate_sample: 1.2 ath_pci: 0.9.4.5 (Atheros/multi-bss) #dmesg | grep wlan wlan: 0.8.4.2 (Atheros/multi-bss) #dmesg | grep wifi wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps wifi0: H/W encryption support: WEP AES AES_CCM TKIP wifi0: mac 7.9 phy 4.5 radio 5.6 wifi0: Use hw queue 1 for WME_AC_BE traffic wifi0: Use hw queue 0 for WME_AC_BK traffic wifi0: Use hw queue 2 for WME_AC_VI traffic wifi0: Use hw queue 3 for WME_AC_VO traffic wifi0: Use hw queue 8 for CAB traffic wifi0: Use hw queue 9 for beacons wifi0: Atheros 5212: mem=0xfdfd0000, irq=9 Karta działa w trybie AP z "otwartym" dostępem. Niestety nie jestem w stanie zmusić jej do przyjęcia połączenia w trybie WPA-PSK - TKIP za pomocą hosapd. Ale to temat na osobny wątek. Pozdrawiam, Czesław Niedzielski |
_______________________________________________ pld-users-pl mailing list pld-users-pl@lists.pld-linux.org http://lists.pld-linux.org/mailman/listinfo/pld-users-pl
