Dnia 04-04-2006, wto o godzinie 09:23 +0200, Michal Abramowicz napisał(a): > On Tue, Apr 04, 2006 at 08:55:16AM +0200, Michał Panasiewicz wrote: > > $ sudo hciconfig hci0 revision > > hci0: Type: USB > > BD Address: 00:11:67:08:xx:xx ACL MTU: 678:8 SCO MTU: 48:10 > > Unsupported manufacturer > > Proste, twój czopek usb jest ;-) niedobry ;-) > W readme pl masz przykład z dobrego czopka czy tam urządzenia blutacz. > jak nie jak tak ;), poprawka juz w kernelu do obsługi niektórych niedobrych "czopków" od wersji 2.6.14.7-5 "... Output from hciconfig hci0 revision (Run hciconfig as root) * If it prints "SCO mapping: HCI" then your adapter should work. * If it prints "SCO mapping: PCM" then you might permanently change the setting using a command like "pskey mapsco 0" using bluez-utils-cvs but this is at your own risk. * If it doesn't print either of those, you probably need a different bluetooth adapter (preferably "CSR" based). You might be able to get a broadcom adapter to work if you apply a patch to force sco mtu values (let us know how it works on bluez-devel!) * ..."
w kazdym razie obsługuje: $ sudo lsusb ... Bus 001 Device 004: ID 1131:1001 Integrated System Solution Corp. KY-BT100 Bluetooth Adapter oraz inne na tym samym układzie wraz z motorola H500 u mnie -- Michał Panasiewicz - jabber: wolvverine [ at ] chrome [ dot ] pl || e-mail: wolvverine [ at ] tlen [ dot ] pl , wolvverine [ at ] pld-linux [ dot ] org http://www.linkomp.pl - Linkomp - Usługi informatyczne dla firm - biuro [ at ] linkomp [ dot ] pl _______________________________________________ pld-users-pl mailing list pld-users-pl@lists.pld-linux.org http://lists.pld-linux.org/mailman/listinfo/pld-users-pl