Dnia 28-09-2007, Pt o godzinie 00:51 +0200, Sylwester Gruszka pisze: > mam programator (zgodny z stk500 v2) na USB, chcę go obsłużyć za > pomocą > avrdude ale mam problem: > > # lsusb > Bus 001 Device 013: ID 16c0:05e1 > > szukając w /dev znalazłem go (tzn myślę, że to on) jako > plik /dev/bus/usb/001/013. Tak mi się przypomniało (właśnie walczyłem z modemem na usb) - po podłączeniu programatora sprawdź co ci mówi dmesg.
U mnie to jest: usb 4-1: new full speed USB device using uhci_hcd and address 31 Device driver usbdev4.31_ep00 lacks bus and class support for being resumed. usb 4-1: configuration #1 chosen from 1 choice ftdi_sio 4-1:1.0: FTDI USB Serial Device converter detected drivers/usb/serial/ftdi_sio.c: Detected FT232BM usb 4-1: FTDI USB Serial Device converter now attached to ttyUSB0 Device driver ttyUSB0 lacks bus and class support for being resumed. Device driver usbdev4.31_ep81 lacks bus and class support for being resumed. Device driver usbdev4.31_ep02 lacks bus and class support for being resumed. Co prawda ten wpis i tak oszukuje, bo pisze "now attached to ttyUSB0" a takiego urządzenia nie ma, bo udev w regułce /etc/udev/rules.d/50-udev-default.rules zmienia urządzenie na /dev/tts/USB0 KERNEL=="ttyUSB[0-9]*", NAME="tts/USB%n", GROUP="ttyS", MODE="0660" -- Pozdrawiam Krystian T. "errare humanum est..." _______________________________________________ pld-users-pl mailing list pld-users-pl@lists.pld-linux.org http://lists.pld-linux.org/mailman/listinfo/pld-users-pl