Dnia sobota, 10 maja 2008, Adam Gapiński napisał: > IMHO wyciąłeś to najważniejsze. To jest całość z mojej płyty: ... > I/O ports at f000 [size=16] > Capabilities: [44] Power Management version 2 > Kernel driver in use: AMD_IDE > Kernel modules: amd74xx, pata_amd
lspci -v .... 00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev a1) (prog-if 8a [Master SecP PriP]) Subsystem: Giga-byte Technology Unknown device b000 Flags: bus master, 66MHz, fast devsel, latency 0 [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8] [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1] [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8] [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1] I/O ports at f000 [size=16] Capabilities: [44] Power Management version 2 00:0e.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1) (prog-if 85 [Master SecO PriO]) Subsystem: Giga-byte Technology Unknown device b002 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 16 I/O ports at 09f0 [size=8] I/O ports at 0bf0 [size=4] I/O ports at 0970 [size=8] I/O ports at 0b70 [size=4] I/O ports at e400 [size=16] Memory at f5005000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable- Capabilities: [cc] HyperTransport: MSI Mapping U mnie nie ma "Kernel driver in use:", myślałem, że przez to, że nie ma żadnego drivera załadowanego do ata ale w sumie w sata też nie pokazuje. lspci -vv też nie pokazuje, nie wiem o co chodzi ;P _______________________________________________ pld-users-pl mailing list pld-users-pl@lists.pld-linux.org http://lists.pld-linux.org/mailman/listinfo/pld-users-pl