[...] > >> dostałem dzisiaj maszyne, która ma kontroler, moduł aacraid > >> > >> czym podglądać na bierząco stan macierzy? > > > > Zależy od macierzy. SASowe np. arcconf.spec > > no to mam tak: > > [r...@rescue SPECS]# uname -a > Linux rescue 2.6.27.12-1 #1 SMP Sun Jan 18 21:52:13 CET 2009 x86_64 > unknown PLD Linux > [r...@rescue SPECS]# arch > x86_64
W samym uname -a masz zwracaną architekturę :) > [r...@rescue SPECS]# ./builder -v -bb afaapps.spec > [...] > [r...@rescue RPMS]# rpm -i arcconf-6.0-1.x86_64.rpm > error: Failed dependencies: > libstdc++.so.5()(64bit) is needed by arcconf-6.0-1.x86_64 > libstdc++.so.5(CXXABI_1.2)(64bit) is needed by > arcconf-6.0-1.x86_64 libstdc++.so.5(GLIBCPP_3.2)(64bit) is needed by > arcconf-6.0-1.x86_64 > libstdc++.so.5(GLIBCPP_3.2.2)(64bit) is needed by > arcconf-6.0-1.x86_64 > > any idea? # rpm -aq | grep std compat-libstdc++-3.3-3.3.5-5.x86_64 libstdc++-4.3.2-5.x86_64 Sugestia: jak masz maszynerię do testów (i czas) do posprawdzaj jak arcconf-6 radzi sobie z "arcconf snapshot" :) > sprzęt to: > 03:00.0 RAID bus controller: Adaptec AAC-RAID (Rocket) (rev 02) # rpm -q arcconf arcconf-5.30-1.x86_64 # arcconf GETCONFIG 1 Controller Status : Optimal Channel description : SAS/SATA Controller Model : Adaptec 3405 Physical Slot : 6 Temperature : 53 C/ 127 F (Normal) Installed memory : 128 MB Copyback : Disabled Background consistency check : Disabled Automatic Failover : Enabled Defunct disk drive count : 0 Logical devices/Failed/Degraded : 2/0/0 BIOS : 5.2-0 (15728) Firmware : 5.2-0 (15728) Driver : 1.1-5 (2437) Boot Flash : 5.2-0 (15728) Sugestia 2: sprawdź czy nie masz nowszego BIOS do upgradu :) upgrade HOWTO: http://www.blaszkowski.com/2008/06/10/adaptec-3405-remote-array-creating/ -- Pozdrawiam, Best regards, Mit freundlichen Grüßen, Wojciech "Wojtosz" Błaszkowski _______________________________________________ pld-users-pl mailing list pld-users-pl@lists.pld-linux.org http://lists.pld-linux.org/mailman/listinfo/pld-users-pl