Witam! Mam nowe łącze od kablówki (Aster) 10/2M. Niestety konfiguracja statyczna interface'ów nie działa. Konfiguracja z dhcp podmienia mi resolv.conf, a tego chcę uniknąć, bo mam własnego nameda. Wyczytałem o parametrach DHCP_OPTIONS="-C resolv.conf" lub "-R" w ifcfg-eth3 no i mam problem po ifup eth3 (poniżej). Jak to się robi żeby działało? (PLD AC)
Pozdrawiam! Wojtek Ustalanie informacji IP dla eth3 (dhclient)........................[ PROBLEMY ] Internet Systems Consortium DHCP Client V3.1.0 Copyright 2004-2007 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ extra dhclient -I/-H/-F/-T/-V/-R configuration arguments line 1: no option named eth3 in space dhcp request eth3; ^ extra dhclient -I/-H/-F/-T/-V/-R configuration arguments line 1: eth3: expected option name. request eth3; ^ Cannot parse -I/-H/-F/-T/-V/-R configuration arguments ! If you did not get this software from ftp.isc.org, please get the latest from ftp.isc.org and install that before requesting help. If you did get this software from ftp.isc.org and have not yet read the README, please read it before requesting help. If you intend to request help from the dhcp-ser...@isc.org mailing list, please read the section on the README about submitting bug reports and requests for help. Please do not under any circumstances send requests for help directly to the authors of this software - please send them to the appropriate mailing list as described in the README file. exiting. Konfiguracja interface: cat /etc/sysconfig/interfaces/ifcfg-eth3 # example config for first ethernet card DEVICE="eth3" ONBOOT="yes" BOOTPROTO="dhcp" DHCP_OPTIONS="-R" _______________________________________________ pld-users-pl mailing list pld-users-pl@lists.pld-linux.org http://lists.pld-linux.org/mailman/listinfo/pld-users-pl