Witam serdecznie,
Właśnie zrobiłem upgrade i mam tak:
[root@Hermes ups]# lsof | grep ttyS0
[root@Hermes ups]# /etc/rc.d/init.d/ups start
Starting UPS
drivers......................................................................................[
FAIL ]
UPS type: Fideltronik Ares Series
Network UPS Tools - Generic contact-closure UPS driver 1.36 (2.7.2)
Unable to open /dev/ttyS0: Device or resource busy
Current user id: ups (70)
Serial port owner: ups (70)
Serial port group: ups (76)
Mode of port: 0666
Things to try:
- Use another port (with the right permissions)
- Fix the port owner/group or permissions on this port
- Run this driver as another user (upsdrvctl -u or 'user=...' in
ups.conf).
See upsdrvctl(8) and ups.conf(5).
Network UPS Tools - UPS driver controller 2.7.2
Fatal error: unusable configuration
Driver failed to start (exit status=1)
Jak widać w akcie desperacji nawet zmieniłem właściciela ttyS0 ale nic
nie pomaga. Jakieś pomysły??
--
Pozdrawiam
Grzesiek
Wysłane z kompa wolnego od wirusów Billa Gatesa.
_______________________________________________
pld-users-pl mailing list
pld-users-pl@lists.pld-linux.org
http://lists.pld-linux.org/mailman/listinfo/pld-users-pl
