Wiadomość napisana przez Adam Osuchowski <ad...@zonk.pl> w dniu 20.02.2017, o godz. 01:03:
> > Jacek Osiecki wrote: >> root@hotel ~>mdadm --verbose --create /dev/md1 -l 5 -n 4 /dev/sda2 /dev/sdb2 >> /dev/sdc2 /dev/sdd2 --metadata=0.90 >> mdadm: layout defaults to left-symmetric >> mdadm: chunk size defaults to 512K >> mdadm: devices too large for RAID level 5 > > Z manuala do mdadma: > > 0, 0.90 > Use the original 0.90 format superblock. This format > limits arrays to 28 component devices and limits compo- > nent devices of levels 1 and greater to 2 terabytes. It > is also possible for there to be confusion about whether > the superblock applies to a whole device or just the last > partition, if that partition starts on a 64K boundary. > > Czyli wolumen w wersji 0.90 nie może mieć więcej niż 2 TB. Nie wymuszaj > przy tworzeniu --metadata=0.90 to powinien się założyć. No tak, faktycznie w tym rzecz - dzięki :) Jakoś odruchowo chciałem 0.90 założyć żeby kernel sam poskładał raida przy wstawaniu… Teraz kojarzę że chyba to samo miałem przy tamtym serwerze :) Pozdrawiam, — Jacek _______________________________________________ pld-users-pl mailing list pld-users-pl@lists.pld-linux.org http://lists.pld-linux.org/mailman/listinfo/pld-users-pl