A próbowałeś:Wyslalem juz to kilka dni temu, ale wyglada na to, ze nie doszlo. Sle zatem raz jeszcze.
Czesc
Pytalem (tutaj albo na devel-pl) o przyczyne rozjezdzania sie A/V. Rzeczywiscie, problem tkwi w RTC, ale szczerze mowiac nie mam zielonego pojecia jak to rozwiazac.
[EMAIL PROTECTED] beorn]$ ls -al /dev/rtc crw-rw-rw- 1 root root 10, 135 1998-05-05 /dev/rtc
(tak, wiem ze /dev/rtc jest read-only, ale probowalem juz wszystkiego)
[EMAIL PROTECTED] beorn]$ cat /dev/rtc
^C
Proba odpalenia mplayera:
[...] Linux RTC init error in ioctl (rtc_irqp_set 1024): Brak dostępu Try adding "echo 1024 > /proc/sys/dev/rtc/max-user-freq" to your system startup scripts. Using usleep() timing [...]
[EMAIL PROTECTED] root]# echo 1024 > /proc/sys/dev/rtc/max-user-freq -bash: /proc/sys/dev/rtc/max-user-freq: No such file or directory
(jest tylko /proc/rtc). Odpalanie mplayera z root'a:
[...] Using Linux hardware RTC timing (1024Hz). [...]
strace mplayera ze zwyklego usera:
open("/dev/rtc", O_RDONLY|O_LARGEFILE) = 4 ioctl(4, RTC_IRQP_SET, 0x400) = -1 EACCES (Permission denied)
OK, zatem do dokumentacji RTC (/usr/src/linux/Documentation/rtc.txt):
[...] Programming and/or enabling interrupt frequencies greater than 64Hz is only allowed by root. This is perhaps a bit conservative, but we don't want an evil user generating lots of IRQs on a slow 386sx-16, where it might have a negative impact on performance. Note that the interrupt handler is only a few lines of code to minimize any possibility of this effect. [...]
czyli czestotliwosc 1024Hz moze ustawic tylko root! Czy mi sie wydaje, czy mplayera trzeba zsuidowac? Ale przeciez zsuidowany mplayer (a raczej GTK) sie na mnie wydziera:
[...] Gtk-WARNING **: This process is currently running setuid or setgid. This is not a supported use of GTK+. You must create a helper program instead. For further details, see:
http://www.gtk.org/setuid.html
Refusing to initialize GTK+. [...]
i dupa blada. Pozostaje ogladac bez GUI, albo z roota. Z roota - niekoszerne, bez GUI - myszka sie nudzi. I jak to ugryzc? Skad wytrzasnac ten cholerny /proc/sys/dev/rtc/max-user-freq? Gdyby byl ten plik, to problem bylby rozwiazany.
Pozdrawiam Beorn
echo 1024 > /proc/rtc/max-user-freq Jaki to kernel?
WK
_________________________________________ http://pld-linux.org/ = faq, howto, newsy
dostales tutaj odpowiedz na swoje pytanie? podziel sie z innymi i dopisz do FAQ! http://pld-linux.org/FAQ/