Witam Z roota działa a z usera nie i nie bardzo wiem co zrobić. Pewnie coś z uprawnieniami, tylko do czego?
[EMAIL PROTECTED] /]$ sane-find-scanner # No SCSI scanners found. If you expected something different, make sure that # you have loaded a SCSI driver for your SCSI adapter. found USB scanner (vendor=0x04a9, product=0x220e, chip=LM983x?) at libusb:001:004 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Scanners connected to the parallel port or other proprietary ports can't be # detected by this program. # You may want to run this program as root to find all devices. Once you # found the scanner devices, be sure to adjust access permissions as # necessary. [EMAIL PROTECTED] /]$ scanimage -L device `v4l:/dev/video0' is a Noname BT878 video (AVerMedia TVPhone virtual device [EMAIL PROTECTED] /]$ sudo scanimage -L device `v4l:/dev/video0' is a Noname BT878 video (AVerMedia TVPhone virtual device device `plustek:libusb:001:004' is a Canon N1240U/LiDE30 USB flatbed scanner Czy ktoś może podpowiedzieć co dalej? Mogę oczywiście skanować z roota, ale to nie jest wyjście i sane ostrzega, że to na własne ryzyko :) -- Pozdrawiam Krystian T "errare humanum est..." _________________________________________ http://pld-linux.org/ = faq, howto, newsy dostales tutaj odpowiedz na swoje pytanie? podziel sie z innymi i dopisz do FAQ! http://pld-linux.org/FAQ/