Witam, Mam kartę ATI: 01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200] (rev 01) 01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200] (Secondary) (rev 01) Soft: X11-6.8.1-3 kernel-2.6.9-0.14jpc [EMAIL PROTECTED] Przy starcie X mam tak (czy mogę coś zrobić żeby było mniej błędów ? przed upgrade X był tylko ten pierwszy - reszta pojawiła się po) : (WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found Skipping "/usr/X11R6/lib/modules/libfb.a:fbmmx.o": No symbols found (WW) fglrx(0): Failed to set up write-combining range (0xe8000000,0x501000) No matching visual for __GLcontextMode with visual class = -1 (-1), nplanes = 0 No matching visual for __GLcontextMode with visual class = -1 (-1), nplanes = 0 No matching visual for __GLcontextMode with visual class = -1 (-1), nplanes = 0 No matching visual for __GLcontextMode with visual class = -1 (-1), nplanes = 0 No matching visual for __GLcontextMode with visual class = -1 (-1), nplanes = 0 No matching visual for __GLcontextMode with visual class = -1 (-1), nplanes = 0 No matching visual for __GLcontextMode with visual class = -1 (-1), nplanes = 0 No matching visual for __GLcontextMode with visual class = -1 (-1), nplanes = 0 No matching visual for __GLcontextMode with visual class = -1 (-1), nplanes = 0 No matching visual for __GLcontextMode with visual class = -1 (-1), nplanes = 0 SetClientVersion: 0 8 Wiem że są problemy z ATI ostatnio więc nic nie mówię, ale nie mogę oglądać filmów na telewizorze - tzn mam podłączone SVIDEO do telewizora i normalnie X widzę tylko jak odpalam mplayer-a to na telewizorze widzę zielony prostokąt. Pod windowsem jest tak samo aż do momentu jak ustawię SVIDEO jako primary display i wtedy jest ładnie. Jak zrobić to samo pod X ? -- Michał Wcisło
|
_______________________________________________ pld-users-pl mailing list [EMAIL PROTECTED] http://lists.pld-linux.org/mailman/listinfo/pld-users-pl