On Sat, 22 Jan 2005, Michal Kochanowicz wrote:
On Sat, Jan 22, 2005 at 07:23:29PM +0100, [EMAIL PROTECTED] wrote:tzn. tylko niebieski ekran z czestotliwosciami :<
Podajesz typ karty przy ładowaniu modułu czy sam wykrywa?
sam wykrywa
Jan 22 20:41:19 pldmachine kernel: bttv: driver version 0.9.15 loaded
Jan 22 20:41:19 pldmachine kernel: bttv: using 8 buffers with 2080k (520 pages) each for capture
Jan 22 20:41:19 pldmachine kernel: bttv: Host bridge needs ETBF enabled.
Jan 22 20:41:19 pldmachine kernel: bttv: Bt8xx card found (0).
Jan 22 20:41:19 pldmachine kernel: bttv0: Bt878 (rev 2) at 0000:00:09.0, irq: 10, latency: 32, mmio: 0xe2001000
Jan 22 20:41:19 pldmachine kernel: bttv0: detected: AVerMedia TVCapture 98 [card=13], PCI subsystem ID is 1461:0004
Jan 22 20:41:19 pldmachine kernel: bttv0: using: AVerMedia TVCapture 98 [card=13,autodetected]
Jan 22 20:41:19 pldmachine kernel: bttv0: enabling ETBF (430FX/VP3 compatibilty)
Jan 22 20:41:19 pldmachine kernel: bttv0: gpio: en=00000000, out=00000000 in=00fef7c3 [init]
Jan 22 20:41:19 pldmachine kernel: bttv0: Hauppauge/Voodoo msp34xx: reset line init [11]
Jan 22 20:41:19 pldmachine kernel: tvaudio: found tda9840 @ 0x84
Jan 22 20:41:19 pldmachine kernel: tuner: chip found at addr 0xc2 i2c-bus bt878 #0 [sw]
Jan 22 20:41:19 pldmachine kernel: bttv0: Avermedia eeprom[0x0297]: tuner=5 radio:no remote control:yes
Jan 22 20:41:19 pldmachine kernel: bttv0: using tuner=5
Jan 22 20:41:19 pldmachine kernel: tuner: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) by bt878 #0 [sw]
Jan 22 20:41:19 pldmachine kernel: bttv0: i2c: checking for MSP34xx @ 0x80... not found
Jan 22 20:41:19 pldmachine kernel: bttv0: i2c: checking for MSP34xx (alternate address) @ 0x88... not found
Jan 22 20:41:19 pldmachine kernel: bttv0: i2c: checking for TDA9875 @ 0xb0... not found
Jan 22 20:41:19 pldmachine kernel: bttv0: i2c: checking for TDA7432 @ 0x8a... not found
Jan 22 20:41:19 pldmachine kernel: bttv0: i2c: checking for TDA9887 @ 0x86... not found
Jan 22 20:41:19 pldmachine kernel: bttv0: registered device video0
Jan 22 20:41:19 pldmachine kernel: bttv0: registered device vbi0
Jan 22 20:41:19 pldmachine kernel: bttv0: PLL: 28636363 => 35468950 . ok
Jan 22 20:41:19 pldmachine kernel: bttv0: add subdevice "remote0"
Pozdrawiam Pawel Bernadowski GG 3377, email [EMAIL PROTECTED]
_______________________________________________ pld-users-pl mailing list pld-users-pl@pld-linux.org http://lists.pld-linux.org/mailman/listinfo/pld-users-pl
