Witam,
chcę zrobić autoryzację na AP przy pomocy radiusa
skonfigurowałem freeradiusa tak, że klient może może się połączyć z
punktem dostępowym, jednak nadal nie ma połączenia do internetu,
pingi wogóle nie chodzą.
będę wdzięczny za wszelkie sugestie..

poniżej log z radiusd -sfxxyz -l stdout

pozdrawiam
Rafał


Ready to process requests.
rad_recv: Access-Request packet from host 192.168.4.88:2048, id=1,
length=172
        User-Name = "00022d5e3147"
        User-Password = "00022d5e3147"
        Called-Station-Id = "00-4f-62-01-fe-1f"
        Calling-Station-Id = "00-02-2d-5e-31-47"
        NAS-Identifier = "Realtek Access Point. 8181"
        NAS-Port = 0
        NAS-Port-Type = Wireless-802.11
        Service-Type = Framed-User
        Framed-MTU = 1400
        Connect-Info = "CONNECT 11Mbps 802.11b"
        NAS-IP-Address = 192.168.4.88
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
  modcall[authorize]: module "preprocess" returns ok for request 0
radius_xlat: 
'/var/log/freeradius/radacct/192.168.4.88/auth-detail-20050426'
rlm_detail:
/var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d 
adacct/192.168.4.88/auth-detail-20050426
  modcall[authorize]: module "auth_log" returns ok for request 0
  modcall[authorize]: module "chap" returns noop for request 0
  modcall[authorize]: module "mschap" returns noop for request 0
    rlm_realm: No '@' in User-Name = "00022d5e3147", looking up
realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 0
  rlm_eap: No EAP-Message, not doing EAP
  modcall[authorize]: module "eap" returns noop for request 0
    users: Matched entry 00022d5e3147 at line 217
  modcall[authorize]: module "files" returns ok for request 0
modcall: group authorize returns ok for request 0
  rad_check_password:  Found Auth-Type Local
auth: type Local
auth: user supplied User-Password matches local User-Password
Login OK: [00022d5e3147/00022d5e3147] (from client ap-test2 port 0
cli 00-02-2d-
Sending Access-Accept of id 1 to 192.168.4.88:2048
        Service-Type = Outbound-User
Finished request 0





_______________________________________________
pld-users-pl mailing list
pld-users-pl@pld-linux.org
http://lists.pld-linux.org/mailman/listinfo/pld-users-pl

Odpowiedź listem elektroniczym