Here's a panic report. I am running Plex86, latest CVS, on Mandrake 8 on an Athlon machine. I was in Win95, fail safe mode, and was removing some devices from the system config panel. I got this error when I pressed "OK" on the system properties window. Plex86 is still running, though it does not respond at all (and no VGA refresh either). Shouldn't a panic cause the program to stop? EL bochs: vga: io write 3c0: address mode reg=19 bochs: vga: io write 3c0: address mode reg=20 ::plex86 panic: ::load_seg_reg: not valid descriptor Fatal monitor error caused Panic eax:0x20000 ebx:0x8c08 ecx:0x213b0 edx:0x21a9f ebp:0x668b84 esi:0x28c08 edi:0x20001 esp:0x668b84 eflags:0x246 eip:0x4eae cs:s=0x17f7, dl=0x585f, dh=0x8000fb14, valid=1 ss:s=0x1c0f, dl=0x7000ffff, dh=0xf366, valid=1 ds:s=0x1717, dl=0x5000021f, dh=0x8180f3d0, valid=1 es:s=0x1c0f, dl=0x7000ffff, dh=0xf366, valid=1 fs:s=0x1cbf, dl=0x26400033, dh=0x8100f353, valid=1 gs:s=0x0, dl=0x7000ffff, dh=0xf366, valid=0 ldtr:s=0xb8, dl=0x70002fff, dh=0x80008209, valid=1 tr:s=0x18, dl=0xaebc2069, dh=0xc0008900, valid=1 gdtr:base=0xc0034af0, limit=0x1f7 idtr:base=0x800a7000, limit=0x2ff dr0:0x0 dr1:0x0 dr2:0x0 dr3:0x0 dr6:0xffff0ff0 dr7:0x400 tr3:0x0 tr4:0x0 tr5:0x0 tr6:0x0 tr7:0x0 cr0:0x80000035 cr1:0x0 cr2:0xbff36333 cr3:0x296000 cr4:0x0 inhibit_mask:0 (Plex86 is still running, but doesn't do a thing) ^C pressed. aborting execution Shutting down plugins bochs: Note: X11: bx_gui_c::exit() not implemented yet. Unmapping guest physical memory. Unmapping monitor print buffer. Tearing down VM Closing VM
