Hi. Tried booting NetBSD 1.4.2, bootfloppy was boot1.fs. It crashed really quick, log is attached. -- Ketil Froyn "I sense much beer in you. Beer leads to University of Oslo intoxication, intoxication to hangovers, Norway and hangovers to... suffering."
Processing command-line options Opening VM (/dev/plex86) Processing config file conf.netbsd... Allocating 4MB of physical memory in VM Mapping virtualized physical memory into monitor Zeroing virtualized physical memory Mapping monitor print buffer into user mem. bochs: ips = 1000000 unmapped_c::init: IGNORING unmapped ports bochs: [cmos] Setting initial clock to: Mon Nov 27 11:18:01 2000 bochs: bx_options.floppy_command_delay = 500 vga construct static bochs: font_width = 8 bochs: font_height = 16 bochs: default_depth = 16 bochs: waiting for MapNotify bochs: MapNotify found. bochs: vga: interval=200000 vga init called bochs: TTY not used, serial port is not connected ROM: loading image 'bios/BIOS-plex86-2000_0817a' @ 0xf0000 (65536 bytes) ROM: loading image 'bios/VGABIOS-elpin-2.40' @ 0xc0000 (32768 bytes) Setting prescan depth to 3 prescan on Processed 61 lines of config file 'conf.netbsd' Initializing plugins Running VM bochs: timer0 period set to 18 hz bochs: CMOS: write reg 14h: value = 05h bochs: vga: io write: 3cf: reg 05: value = 10h bochs: vga: io write: 3da: ignoring: feature ctrl & vert sync bochs: *** io read 3c5 case 1: sequencer clocking mode bochs: vga: io write 3c0: address mode reg=16 bochs: vga: io write 3c0: address mode reg=17 bochs: vga: io write 3c0: address mode reg=18 bochs: vga: io write 3c0: address mode reg=19 bochs: vga: io write 3c0: address mode reg=20 bochs: *** io read 3c5 case 1: sequencer clocking mode bochs: vga: io write: 3cf: reg 05: value = 10h bochs: *** io read 3c5 case 1: sequencer clocking mode ::last_laddr = 0x0 event=0x0 ::plex86 panic: ::handle_fault: 12 Fatal monitor error caused Panic eax:0x20 ebx:0x0 ecx:0x1 edx:0x0 ebp:0xcc15fff0 esi:0x0 edi:0x500 esp:0xcc15ffc8 eflags:0x10096 eip:0x5e9 cs:s=0x18, dl=0x1000ffff, dh=0x409e00, valid=1 ss:s=0x20, dl=0x1000ffff, dh=0xf9300, valid=1 ds:s=0x20, dl=0x1000ffff, dh=0xf9200, valid=1 es:s=0x20, dl=0x1000ffff, dh=0xf9300, valid=1 fs:s=0x0, dl=0xffff, dh=0x9300, valid=1 gs:s=0x0, dl=0xffff, dh=0x9300, valid=1 ldtr:s=0x0, dl=0x0, dh=0x0, valid=0 tr:s=0x0, dl=0x0, dh=0x0, valid=0 gdtr:base=0x1410, limit=0x2f idtr:base=0x0, limit=0x3ff dr0:0x0 dr1:0x0 dr2:0x0 dr3:0x0 dr6:0xffff0ff0 dr7:0x400 tr3:0x0 tr4:0x0 tr5:0x0 tr6:0x0 tr7:0x0 cr0:0x60000033 cr1:0x0 cr2:0x0 cr3:0x0 cr4:0x0 inhibit_mask:0 Stack dump: Current instruction: 0018.000005E9 8B5508 movl 08(%ebp), %edx Shutting down plugins bochs: Note: X11: bx_gui_c::exit() not implemented yet. Unmapping guest physical memory. Unmapping monitor print buffer. Tearing down VM Closing VM
