Where are the arrow keys? On Tuesday, 15 February 2022 at 14:40:05 UTC Ant wrote:
> Hi! > > If there are no lights on, the board is in NKRO mode and the machine in > Plover should be set to* Keyboard*. > > But you probably want to use the EcoSteno in Gemini PR mode instead. You > can change the mode by pressing the button on the top left until the green > light turns on. Then in Plover you then need to go to *Configure > > Machine*, set the machine to *Gemini PR* and then scan for the machine. > If the scan doesn't work, you might need to manually choose the machine in > the port dropdown list. > > There's a bit more information on the EcoSteno product page > <https://nolltronics.com/product/ecosteno/?v=79cba1185463>, including a > video <https://youtu.be/EoAcHCTDXio> on how to set it up (although it was > made with an older version, so make sure to use Gemini PR instead of TX > Bolt) and a diagram > <https://nolltronics.com/wp-content/uploads/2021/04/Noll-Modes.png> > showing the different available layouts that the board has. > > I hope that this helps :) > -- Ant > On Tuesday, February 15, 2022 at 1:08:21 PM UTC begie...@yahoo.com wrote: > >> I was a court reporting student and I got to about 120 words per minute >> before dropping out, so I'm pretty familiar with stenography. I got an >> ecosteno keyboard to have a more portable practice option. I got it set up >> with Plover and it is working, the only problem is the keyboard layout is >> not the same as a dedicated steno machine. >> >> How do I get it to match up with steno keyboard? >> >> Denise White >> > -- You received this message because you are subscribed to the Google Groups "Plover" group. To unsubscribe from this group and stop receiving emails from it, send an email to ploversteno+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/ploversteno/62996e80-4d05-4ac4-9482-a3eb74e18f98n%40googlegroups.com.