Hi Alan: I noticed that you did not run the perl/PDL tests. Are they broken?
Thanks, Doug dh...@ucar.edu Software Engineer UCAR - COSMIC, Tel. (303) 497-2611 On Wed, 24 Apr 2013, Alan W. Irwin wrote: > Today I decided to comprehensively test PLplot because it has been a > long time since I did that, and there is a new CMake version > cmake-2.8.11-rc3 that is about to get released as cmake-2.8.11 unless > cmake users (such as us) can find any issues. > > After cmake-2.8.11-rc3 was downloaded, built (using the bootstrap > method), and installed, I did the comprehensive test as follows: > > time (nice -19 scripts/comprehensive_test.sh --do_test_interactive no) > > (I turned off the interactive testing since otherwise I would have > had to babysit the test clicking on many GUI's to get the interactive > tests completed.) > > That comprehensive test required a number of minor PLplot fixups to be > made (see my recent commits) which reaffirms that these comprehensive > tests are worth doing. > > After those changes, the above run of comprehensive_test.sh took > 51 minutes to complete (and from > prior notes) on my entry-level PC and requires about 4GB of disk space > as a high-water mark to store the results of each of the many > components of the tests that are done before the resulting files are > cleaned. There were about 290M of files left at the end of the > comprehensive test. > > To look for meaningful error messages in those tests, I ran > > find ../comprehensive_test_disposeable/ -name "*.out*" | \ > xargs grep -i error |grep -v test.error > > That shows there are linking errors for the case of the static library > build + traditional (Make + pkg-config) build of the installed > examples. This used to work fine, but I guess the Debian wheezy > toolchain just doesn't handle this case properly any more (or takes > more care with linking of code generated from a variety of languages). > Note, I got the same bad results for this case when using > cmake-2.8.10.2 so this is not a cmake regression. > > Andrew, would you be willing to take a look? > > In contrast to the traditional build of the installed examples, the > CMake build system for these installed examples works fine for the > static library build. So it appears we could fix up these > linking issues for the traditional build by following what > is done for the cmake-based build of the installed examples. > > I also looked for warnings in the comprehensive test results and > got the following results: > > software@raven> find ../comprehensive_test_disposeable/ -name "*.out*" | \ > xargs grep -i warn |grep -v imultilib |grep -v "PLPLOT WARNING" | \ > grep -v perl |grep -v AGG > ../comprehensive_test_disposeable/shared/output_tree/installed_make_noninteractive.out:WARNING: > Some PostScript or stdout results were different > ../comprehensive_test_disposeable/shared/output_tree/make_noninteractive.out:WARNING: > Some PostScript or stdout results were different > ../comprehensive_test_disposeable/shared/output_tree/ctest.out:25: WARNING: > Some PostScript or stdout results were different > ../comprehensive_test_disposeable/shared/output_tree/make.out:sip: > Deprecation warning: > /home/software/plplot_svn/HEAD/plplot_allura/bindings/qt_gui/pyqt4/plplot_pyqt4.sip:25: > %Module version number should be specified using the 'version' argument > ../comprehensive_test_disposeable/shared/output_tree/make.out:/home/software/plplot_svn/HEAD/comprehensive_test_disposeable/shared/build_tree/config.h:55:0: > warning: "HAVE_FREETYPE" redefined [enabled by default] > ../comprehensive_test_disposeable/shared/output_tree/make.out:/home/software/plplot_svn/HEAD/plplot_allura/bindings/tk/plserver.c:134:9: > warning: passing argument 2 of ?Tcl_SetResult? discards ?const? qualifier > from pointer target type [enabled by default] > ../comprehensive_test_disposeable/shared/output_tree/traditional_make_noninteractive.out:WARNING: > Some PostScript or stdout results were different > ../comprehensive_test_disposeable/nondynamic/output_tree/installed_make_noninteractive.out:WARNING: > Some PostScript or stdout results were different > ../comprehensive_test_disposeable/nondynamic/output_tree/make_noninteractive.out:WARNING: > Some PostScript or stdout results were different > ../comprehensive_test_disposeable/nondynamic/output_tree/cmake.out:-- > WARNING: ENABLE_DYNDRIVERS is OFF so force PLD_extqt to be OFF > ../comprehensive_test_disposeable/nondynamic/output_tree/cmake.out:-- > WARNING: PLD_extqt is OFF so setting ENABLE_qt to OFF. > ../comprehensive_test_disposeable/nondynamic/output_tree/cmake.out:-- > WARNING: ENABLE_qt is OFF so setting ENABLE_pyqt4 to OFF. > ../comprehensive_test_disposeable/nondynamic/output_tree/ctest.out:25: > WARNING: Some PostScript or stdout results were different > ../comprehensive_test_disposeable/nondynamic/output_tree/make.out:/home/software/plplot_svn/HEAD/comprehensive_test_disposeable/nondynamic/build_tree/config.h:55:0: > warning: "HAVE_FREETYPE" redefined [enabled by default] > ../comprehensive_test_disposeable/nondynamic/output_tree/make.out:/home/software/plplot_svn/HEAD/plplot_allura/bindings/tk/plserver.c:134:9: > warning: passing argument 2 of ?Tcl_SetResult? discards ?const? qualifier > from pointer target type [enabled by default] > ../comprehensive_test_disposeable/nondynamic/output_tree/traditional_make_noninteractive.out:WARNING: > Some PostScript or stdout results were different > ../comprehensive_test_disposeable/static/output_tree/installed_make_noninteractive.out:WARNING: > Some PostScript or stdout results were different > ../comprehensive_test_disposeable/static/output_tree/make_noninteractive.out:WARNING: > Some PostScript or stdout results were different > ../comprehensive_test_disposeable/static/output_tree/cmake.out:-- WARNING: > Java requires shared libraries. Disabling java bindings > ../comprehensive_test_disposeable/static/output_tree/cmake.out:-- WARNING: > Python requires shared libraries. Disabling Python bindings > ../comprehensive_test_disposeable/static/output_tree/cmake.out:-- WARNING: > Octave requires shared libraries. Disabling octave bindings > ../comprehensive_test_disposeable/static/output_tree/cmake.out:-- WARNING: > Disabling Perl/PDL examples because BUILD_SHARED_LIBS=OFF > ../comprehensive_test_disposeable/static/output_tree/cmake.out:-- WARNING: > Lua requires shared libraries. Disabling Lua bindings > ../comprehensive_test_disposeable/static/output_tree/cmake.out:-- WARNING: > Shared libraries not built. Setting ENABLE_DYNDRIVERS OFF. > ../comprehensive_test_disposeable/static/output_tree/cmake.out:-- WARNING: > ENABLE_DYNDRIVERS is OFF so force PLD_extqt to be OFF > ../comprehensive_test_disposeable/static/output_tree/cmake.out:-- WARNING: > PLD_extqt is OFF so setting ENABLE_qt to OFF. > ../comprehensive_test_disposeable/static/output_tree/cmake.out:-- WARNING: > ENABLE_python is OFF so setting ENABLE_pyqt4 to OFF. > ../comprehensive_test_disposeable/static/output_tree/cmake.out:-- > WARNING:Static build with ENABLE_ocaml_static false. Therefore, disabling > ocaml bindings > ../comprehensive_test_disposeable/static/output_tree/ctest.out:20: WARNING: > Some PostScript or stdout results were different > ../comprehensive_test_disposeable/static/output_tree/make.out:/home/software/plplot_svn/HEAD/plplot_allura/bindings/tk/plserver.c:134:9: > warning: passing argument 2 of ?Tcl_SetResult? discards ?const? qualifier > from pointer target type [enabled by default] > > Most of these warnings are harmless, but it would be good to get rid of > all of warnings associated with "sip: Deprecation", the HAVE_FREETYPE > redefinition, the > plserver.c build, and the "WARNING: Some PostScript or stdout results > were different" message. That latter is because the changes to > examples/c/x16c.c have not been propagated only to examples/c++ so far. > Here is the detailed report covering that: > > c++ > Missing examples : > Differing postscript output : > Missing stdout : > Differing stdout : > f95 > Missing examples : > Differing postscript output : 16 > Missing stdout : > Differing stdout : > java > Missing examples : > Differing postscript output : 16 > Missing stdout : > Differing stdout : > octave > Missing examples : > Differing postscript output : 16 > Missing stdout : > Differing stdout : > python > Missing examples : > Differing postscript output : 16 > Missing stdout : > Differing stdout : > tcl > Missing examples : > Differing postscript output : 16 > Missing stdout : > Differing stdout : > ada > Missing examples : > Differing postscript output : 16 > Missing stdout : > Differing stdout : > adathick > Missing examples : > Differing postscript output : 16 > Missing stdout : > Differing stdout : > ocaml > Missing examples : > Differing postscript output : 16 > Missing stdout : > Differing stdout : > lua > Missing examples : > Differing postscript output : 16 > Missing stdout : > Differing stdout : > d > Missing examples : > Differing postscript output : 16 > Missing stdout : > Differing stdout : > > In sum these comprehensive tests indicate no issues for > cmake-2.8.11-rc3, serious linking issues for the > traditional build of the installed examples for the static > library case (these occur also for cmake-2.8.10.2); less serious > warnings detailed above which should nevertheless be > fixed, and example 16 propagation issues which should be fixed. > > Alan > __________________________ > Alan W. Irwin > > Astronomical research affiliation with Department of Physics and Astronomy, > University of Victoria (astrowww.phys.uvic.ca). > > Programming affiliations with the FreeEOS equation-of-state > implementation for stellar interiors (freeeos.sf.net); the Time > Ephemerides project (timeephem.sf.net); PLplot scientific plotting > software package (plplot.sf.net); the libLASi project > (unifont.org/lasi); the Loads of Linux Links project (loll.sf.net); > and the Linux Brochure Project (lbproject.sf.net). > __________________________ > > Linux-powered Science > __________________________ > > ------------------------------------------------------------------------------ > Try New Relic Now & We'll Send You this Cool Shirt > New Relic is the only SaaS-based application performance monitoring service > that delivers powerful full stack analytics. Optimize and monitor your > browser, app, & servers with just a few lines of code. Try New Relic > and get this awesome Nerd Life shirt! http://p.sf.net/sfu/newrelic_d2d_apr > _______________________________________________ > Plplot-devel mailing list > Plplot-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/plplot-devel > ------------------------------------------------------------------------------ Try New Relic Now & We'll Send You this Cool Shirt New Relic is the only SaaS-based application performance monitoring service that delivers powerful full stack analytics. Optimize and monitor your browser, app, & servers with just a few lines of code. Try New Relic and get this awesome Nerd Life shirt! http://p.sf.net/sfu/newrelic_d2d_apr _______________________________________________ Plplot-devel mailing list Plplot-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/plplot-devel
