Cox modems will learn and allow only 1 mac at a time (unless business is set to allow more, but not on residential). If switching out firewalls, I 99% of time reboot the modem first and foremost.
-mb On Sun, May 3, 2020 at 12:08 PM Snyder, Alexander J via PLUG-discuss < plug-discuss@lists.phxlinux.org> wrote: > I got it working. > > I assigned the SFP+ port as my LAN and assigned it the 10.x.x.x/16 > network. Then I had to call COX and list the WAN Mac address with them. > Upon doing so I was able to reach external sites, and all downstream > devices started coming alive! > > Thanks for all the suggestions and help! > > Thanks, > Alexander > > Sent from my Galaxy S10+ > > On Sun, May 3, 2020, 03:14 Herminio Hernandez, Jr. via PLUG-discuss < > plug-discuss@lists.phxlinux.org> wrote: > >> Can you login to the FW via the LAN interface? Can you ping the FW LAN >> interface? Check the routing and NAT policy on the FW. All outbound traffic >> should NAT to the FW WAN interface and there should be a default ( >> 0.0.0.0/0) route to the internet. >> >> On Sat, May 2, 2020 at 7:27 PM Seabass via PLUG-discuss < >> plug-discuss@lists.phxlinux.org> wrote: >> >>> I'm with Mac, I think it is not the firewall, but if you have the >>> ability to plug it into a display with a keyboard, you can use that for >>> configuration and modify a different device at the same time. >>> >>> Makes it easier to troubleshoot by giving you the ability to configure >>> your pfSense ports at the same time. >>> >>> >>> >>> Message: 2 >>> Date: Sat, 2 May 2020 09:04:35 -0700 >>> From: Donald Mac McCarthy <m...@oscontext.com> >>> To: "Snyder, Alexander J via PLUG-discuss" >>> <plug-discuss@lists.phxlinux.org> >>> Subject: Re: pfSense + Ubiquity >>> Message-ID: <18adfa38-3e72-7b0a-e31a-1ddf175d7...@oscontext.com> >>> Content-Type: text/plain; charset="utf-8" >>> >>> I can help - but I am unavailable to do so until tomorrow. >>> >>> Make sure there are not any thing other than default VLANs on the >>> interfaces to start with. Ubiquiti is famous for not havinght eSFP+ >>> ports active in the default configuration, and I believe the switch has >>> all the ports to shutdown on default config as well. >>> >>> I think it is the switch not passing traffic through - no the firewall. >>> >>> Mac >>> Snyder, Alexander J via PLUG-discuss wrote on 5/2/20 8:53 AM: >>> > Does anyone out there have experience with pfSence and Ubiquity >>> switches? >>> > >>> > I have zero with either but that didn't stop me from buying both .... >>> > how hard could it be?! LOL. >>> > >>> > I bought a Negate XG-1537-1U. I bought a Unifi Pro 24 PoE switch. >>> > >>> > I can configure the FW immediately after >>> > firstboot/restore-default-configs, but only if i set the LAN interface >>> > to be the cable that goes directly to my laptop. That's great, but >>> > that does shit for the downstream switch. >>> > >>> > I have a 10GB SFP+ Port that I want to configure as the downstream >>> > port to ubiquity, but any configuration other than mentioned above >>> > fails .... and I'm now on my 12th "Reset To Factory Defaults" ... any >>> > help on this would be greatly appreciated! >>> > >>> > Thanks, >>> > Alexander >>> > >>> > Sent from my Galaxy S10+ >>> > >>> > >>> > --------------------------------------------------- >>> > PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org >>> > To subscribe, unsubscribe, or to change your mail settings: >>> > https://lists.phxlinux.org/mailman/listinfo/plug-discuss >>> >>> -- >>> Donald "Mac" McCarthy >>> Director, Field Operations >>> Open Source Context >>> +1.602.584.4445 >>> m...@oscontext.com >>> https://oscontext.com >>> -------------- next part -------------- >>> An HTML attachment was scrubbed... >>> URL: < >>> http://lists.phxlinux.org/pipermail/plug-discuss/attachments/20200502/aeab14b4/attachment-0001.html >>> > >>> >>> ------------------------------ >>> >>> Subject: Digest Footer >>> >>> _______________________________________________ >>> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org >>> To subscribe, unsubscribe, or to change your mail settings: >>> https://lists.phxlinux.org/mailman/listinfo/plug-discuss >>> >>> >>> ------------------------------ >>> >>> End of PLUG-discuss Digest, Vol 179, Issue 2 >>> ******************************************** >>> >>> >>> >>> --------------------------------------------------- >>> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org >>> To subscribe, unsubscribe, or to change your mail settings: >>> https://lists.phxlinux.org/mailman/listinfo/plug-discuss >> >> --------------------------------------------------- >> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org >> To subscribe, unsubscribe, or to change your mail settings: >> https://lists.phxlinux.org/mailman/listinfo/plug-discuss > > --------------------------------------------------- > PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org > To subscribe, unsubscribe, or to change your mail settings: > https://lists.phxlinux.org/mailman/listinfo/plug-discuss
--------------------------------------------------- PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org To subscribe, unsubscribe, or to change your mail settings: https://lists.phxlinux.org/mailman/listinfo/plug-discuss