On 2021-05-26 17:32, Michael Butash via PLUG-discuss wrote:
On Wed, May 26, 2021 at 2:24 PM Keith Smith via PLUG-discuss
I am running a 250GB SSD. It will be entirely dedicated to the
server.
In reading the docs there is an option of using the entire disk for
LVM
and there will be two partitions, one for /boot and one for
everything
else.
This is overkill unless you're going to be adding another disk at some
point or constantly making and destroying LVs. With a disk that small,
it'd be totally fine to have an EFI partition of about 256M and a /
partition taking up the rest of the space.
I run everything through LVM after about the second time I crashed my
root partition on plain ext2 by filling it entirely, at least probably
10-12 years now. LVM2 doesn't crash it like that even if filled, or
cause a full fsck of fscking time and other weird catastrophic
ext3 was in the vanilla kernel in Nov. 2001 and rapidly became
available and really well-tested. SuSE was heavily pushing ReiserFS, so
I was using that for a while, but I went ext3 in 2004 or 2005. ext2 in
2009?
I'd love to hear reasons not to use lvm, as it's dated,
You hear "dated", I hear "has had a lot of people banging on it for a
long time, so all the major and most of the minor bugs are fixed". The
main reason not to use LVM is dual booting, as nothing but Linux can
read LVM. With things like laptops, where you've usually only got 1
disk, there's little benefit to LVM.
and looked at things like zfs and btrfs to replace 1)
raid, 2) encryption. and 3) logical volumes, but without these all
wasn't really an option. Curious if anyone's using any one native
solution for all three yet. Using mdraid+luks+lvm+ext4 is still my
general go-to.
btrfs and zfs try to do too much in the same place and suffer for it.
md has proven itself in the field, and LVM is filesystem-agnostic so if
you want to run something other than ext4, you could.
--
Crow202 Blog: http://crow202.org/wordpress
There is no Darkness in Eternity
But only Light too dim for us to see.
---------------------------------------------------
PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org
To subscribe, unsubscribe, or to change your mail settings:
https://lists.phxlinux.org/mailman/listinfo/plug-discuss
