Hello all,
I'm not sure what is wrong with my gigabit interfaces. I noticed that
it keeps on flapping. I tried searching the web for a similar problem
and/or possible fix on the bnx2 driver but with no luck.
Has anyone encountered this problem? Kindly check below for more information.
Regards,
Marvin
# cat /etc/redhat-release
CentOS release 5 (Final)
# uname -r
2.6.18-53.1.21.el5
# uptime
13:14:45 up 297 days, 11:26, 2 users, load average: 0.65, 0.50, 0.55
# lspci | grep BCM5708
03:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708
Gigabit Ethernet (rev 12)
07:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708
Gigabit Ethernet (rev 12)
# cat /proc/net/bonding/bond0
Ethernet Channel Bonding Driver: v3.1.2 (January 20, 2007)
Bonding Mode: IEEE 802.3ad Dynamic link aggregation
Transmit Hash Policy: layer2 (0)
MII Status: up
MII Polling Interval (ms): 100
Up Delay (ms): 0
Down Delay (ms): 0
802.3ad info
LACP rate: slow
Active Aggregator Info:
Aggregator ID: 1
Number of ports: 2
Actor Key: 17
Partner Key: 22
Partner Mac Address: 00:1f:12:8a:af:c0
Slave Interface: eth0
MII Status: up
Link Failure Count: 86
Permanent HW addr: 00:1e:c9:cd:e5:db
Aggregator ID: 1
Slave Interface: eth1
MII Status: up
Link Failure Count: 184
Permanent HW addr: 00:1e:c9:cd:e5:dd
Aggregator ID: 1
# dmesg | grep eth | more
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
device eth0 entered promiscuous mode
device eth1 entered promiscuous mode
device eth0 left promiscuous mode
device eth1 left promiscuous mode
device eth0 entered promiscuous mode
device eth1 entered promiscuous mode
device eth0 left promiscuous mode
device eth1 left promiscuous mode
device eth0 entered promiscuous mode
device eth1 entered promiscuous mode
device eth0 left promiscuous mode
device eth1 left promiscuous mode
device eth0 entered promiscuous mode
device eth1 entered promiscuous mode
device eth0 left promiscuous mode
device eth1 left promiscuous mode
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
device eth0 entered promiscuous mode
device eth1 entered promiscuous mode
device eth0 left promiscuous mode
device eth1 left promiscuous mode
device eth0 entered promiscuous mode
device eth1 entered promiscuous mode
device eth0 left promiscuous mode
device eth1 left promiscuous mode
device eth0 entered promiscuous mode
device eth1 entered promiscuous mode
device eth0 left promiscuous mode
device eth1 left promiscuous mode
device eth0 entered promiscuous mode
device eth1 entered promiscuous mode
device eth0 left promiscuous mode
device eth1 left promiscuous mode
device eth0 entered promiscuous mode
device eth1 entered promiscuous mode
device eth0 left promiscuous mode
device eth1 left promiscuous mode
device eth0 entered promiscuous mode
device eth1 entered promiscuous mode
device eth0 left promiscuous mode
device eth1 left promiscuous mode
device eth0 entered promiscuous mode
device eth1 entered promiscuous mode
device eth0 left promiscuous mode
device eth1 left promiscuous mode
device eth0 entered promiscuous mode
device eth1 entered promiscuous mode
device eth0 left promiscuous mode
device eth1 left promiscuous mode
device eth0 entered promiscuous mode
device eth1 entered promiscuous mode
device eth0 left promiscuous mode
device eth1 left promiscuous mode
device eth0 entered promiscuous mode
device eth1 entered promiscuous mode
device eth0 left promiscuous mode
device eth1 left promiscuous mode
device eth0 entered promiscuous mode
device eth1 entered promiscuous mode
device eth0 left promiscuous mode
device eth1 left promiscuous mode
device eth0 entered promiscuous mode
device eth1 entered promiscuous mode
device eth0 left promiscuous mode
device eth1 left promiscuous mode
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth1 NIC Link is Down
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth1 NIC Link is Down
bonding: bond0: link status definitely down for interface eth1, disabling it
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
device eth0 entered promiscuous mode
device eth1 entered promiscuous mode
device eth0 left promiscuous mode
device eth1 left promiscuous mode
device eth0 entered promiscuous mode
device eth1 entered promiscuous mode
device eth0 left promiscuous mode
device eth1 left promiscuous mode
device eth0 entered promiscuous mode
device eth1 entered promiscuous mode
device eth0 left promiscuous mode
device eth1 left promiscuous mode
device eth0 entered promiscuous mode
device eth1 entered promiscuous mode
device eth0 left promiscuous mode
device eth1 left promiscuous mode
device eth0 entered promiscuous mode
device eth1 entered promiscuous mode
device eth0 left promiscuous mode
device eth1 left promiscuous mode
device eth0 entered promiscuous mode
device eth1 entered promiscuous mode
device eth0 left promiscuous mode
device eth1 left promiscuous mode
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
device eth0 entered promiscuous mode
device eth1 entered promiscuous mode
device eth0 left promiscuous mode
device eth1 left promiscuous mode
device eth0 entered promiscuous mode
device eth1 entered promiscuous mode
device eth0 left promiscuous mode
device eth1 left promiscuous mode
device eth0 entered promiscuous mode
device eth1 entered promiscuous mode
device eth0 left promiscuous mode
device eth1 left promiscuous mode
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
device eth0 entered promiscuous mode
device eth1 entered promiscuous mode
device eth0 left promiscuous mode
device eth1 left promiscuous mode
device eth0 entered promiscuous mode
device eth1 entered promiscuous mode
device eth0 left promiscuous mode
device eth1 left promiscuous mode
device eth0 entered promiscuous mode
device eth1 entered promiscuous mode
device eth0 left promiscuous mode
device eth1 left promiscuous mode
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
device eth0 entered promiscuous mode
device eth1 entered promiscuous mode
device eth0 left promiscuous mode
device eth1 left promiscuous mode
device eth0 entered promiscuous mode
device eth1 entered promiscuous mode
device eth0 left promiscuous mode
device eth1 left promiscuous mode
device eth0 entered promiscuous mode
device eth1 entered promiscuous mode
device eth0 left promiscuous mode
device eth1 left promiscuous mode
device eth0 entered promiscuous mode
device eth1 entered promiscuous mode
device eth0 left promiscuous mode
device eth1 left promiscuous mode
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bnx2: eth0 NIC Link is Down
bonding: bond0: link status definitely down for interface eth0, disabling it
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
device eth0 entered promiscuous mode
device eth1 entered promiscuous mode
device eth0 left promiscuous mode
device eth1 left promiscuous mode
device eth0 entered promiscuous mode
device eth1 entered promiscuous mode
device eth0 left promiscuous mode
device eth1 left promiscuous mode
device eth0 entered promiscuous mode
device eth1 entered promiscuous mode
device eth0 left promiscuous mode
device eth1 left promiscuous mode
# while true; do ethtool -S eth0 | grep disc; ethtool -S eth1 | grep
disc; echo "---------"; sleep 10; done;
rx_discards: 0
rx_fw_discards: 195023
rx_discards: 0
rx_fw_discards: 220795
---------
rx_discards: 0
rx_fw_discards: 195023
rx_discards: 0
rx_fw_discards: 220795
---------
rx_discards: 0
rx_fw_discards: 195169
rx_discards: 0
rx_fw_discards: 220823
---------
rx_discards: 0
rx_fw_discards: 195169
rx_discards: 0
rx_fw_discards: 220823
_________________________________________________
Philippine Linux Users' Group (PLUG) Mailing List
http://lists.linux.org.ph/mailman/listinfo/plug
Searchable Archives: http://archives.free.net.ph
