Hello Marlon, Yes, netscreen 25 will not be able to handle full routing table. That's why my suggestion is to get selective route from one link and default all route to the other link.
You need someone who knows JunOS to be able to do this. Regards, JR On 7/4/11 11:14 AM, Reynald I. Ngo wrote: > Hi Marlon, > > First of all, yeah this is not Linux related so this is off-topic. > > Nonetheless, here's my take. > > 1.) Do you other peering besides ePLDT? You haven't mentioned it. If > none, BGP would be useless. > 2.) I don't think netscreen 25 can handle full routing table, it will > halt. You need to talk to you telco what you want to receive only. > 3.) You're setup is transit so it would be a bit tricky to talk to 2 > different telcos much more instruct them to talk to each other since > you have little knowledge on BGP. > > Good luck, hope this helps. > > On Sun, Jul 3, 2011 at 10:21 PM, Marlon Guzman <[email protected]> > wrote: >> Hi JR, >> We already have one. Next would be setting up our Juniper NetScreen 25 as >> BGP. Any ideas? >> Thanks! > _________________________________________________ > Philippine Linux Users' Group (PLUG) Mailing List > http://lists.linux.org.ph/mailman/listinfo/plug > Searchable Archives: http://archives.free.net.ph > _________________________________________________ Philippine Linux Users' Group (PLUG) Mailing List http://lists.linux.org.ph/mailman/listinfo/plug Searchable Archives: http://archives.free.net.ph
