I have an APC Back-UPS ES 550 UPS. I have a Gateway E-4500D plugged into it along with a Samsung SyncMaster 712n and a SyncMaster 205nw. Up until Saturday I also had my Sony Vaio and another SyncMaster 712 and a pair of external speakers plugged into it. We had a power outage Saturday evening while I was working on the machines. (Because of the "improvements" made in Ubuntu 12.04 I need to run the Sony on 10.04 in order to be able to use my foot pedal and audio transcription playback software, but that's a different story.)
Anyway, when the power went out the Gateway immediately died. The Sony and the three monitors remained running until I went through a controlled shut down of the Sony. I can't put my hands on the test results I got using my Kill A Watt, but I recall that the power consumption for all that hardware was way under the 330 watts / 550 VA the APC unit is rated for. But, thinking there may be something more subtle going on I decided to move the Sony, its monitor, and the speakers from the battery plus surge protection side of the APC to just the surge protection side, since I don't create stuff on that machine, just play back files I download. That left only the the Gateway machine and its two monitors on the APC. This afternoon, while working again, there was a power blip. The Sony survived the blip, but the Gateway rebooted. Later on there was another power blip, but this time both machines survived it. In all three cases I didn't lose anything thanks to my auto save setting in LibreOffice. It was just annoying to have to reboot, start up Thunderbird again, and send passwords to five different e-mail accounts. (Another story. Sigh.) While looking on Amazon at another APC unit (so I'd have one for each machine) I found a comment that warned about some computer power supplies needing pure sine wave. The BackUPS ES 550 delivers stepped approximation to a sine wave. I'm hoping the Gateway is old enough that it isn't that sensitive, but I don't find anything that tells me either way. Any thoughts on why the Gateway should not survive a power failure while plugged into a UPS? The indicator light on the APC is green. Red is supposed to indicate the need for a new battery. This unit isn't all that old, either, but again, I would have to dig to find the receipt, so I can't say if I bought it in 2012 or 2011, or maybe even earlier this year. -- Regards, Dick Steffens _______________________________________________ PLUG mailing list [email protected] http://lists.pdxlinux.org/mailman/listinfo/plug
