On Wed, 3 Jan 2024, Russell Senior wrote:
Look in dmesg output after plugging it in:
dmesg -T (provides decoded timestamps)
Russell,
Good idea. Thanks.
[Wed Jan 3 14:13:21 2024] usb 1-11: new high-speed USB device number 2 using
xhci_hcd
[Wed Jan 3 14:13:21 2024] usb 1-11: New USB device found, idVendor=1f75,
idProduct=0611, bcdDevice= 0.06
[Wed Jan 3 14:13:21 2024] usb 1-11: New USB device strings: Mfr=4, Product=5,
SerialNumber=6
[Wed Jan 3 14:13:21 2024] usb 1-11: Product: XT-U33502
[Wed Jan 3 14:13:21 2024] usb 1-11: Manufacturer: XinTop
[Wed Jan 3 14:13:21 2024] usb 1-11: SerialNumber: 20230921
[Wed Jan 3 14:13:21 2024] usb-storage 1-11:1.0: USB Mass Storage device
detected
[Wed Jan 3 14:13:21 2024] scsi host10: usb-storage 1-11:1.0
[Wed Jan 3 14:13:22 2024] scsi host10: scsi scan: INQUIRY result too short
(5), using 36
[Wed Jan 3 14:13:22 2024] scsi 10:0:0:0: Direct-Access XinTop XT-U33502
PQ: 0 ANSI: 0
[Wed Jan 3 14:13:22 2024] sd 10:0:0:0: [sdg] Very big device. Trying to use
READ CAPACITY(16).
[Wed Jan 3 14:13:22 2024] sd 10:0:0:0: [sdg] 7814037168 512-byte logical
blocks: (4.00 TB/3.64 TiB)
[Wed Jan 3 14:13:22 2024] sd 10:0:0:0: [sdg] Write Protect is off
[Wed Jan 3 14:13:22 2024] sd 10:0:0:0: [sdg] Mode Sense: 3b 00 00 00
[Wed Jan 3 14:13:22 2024] sd 10:0:0:0: [sdg] No Caching mode page found
[Wed Jan 3 14:13:22 2024] sd 10:0:0:0: [sdg] Assuming drive cache: write
through
[Wed Jan 3 14:13:22 2024] sd 10:0:0:0: [sdg] Very big device. Trying to use
READ CAPACITY(16).
[Wed Jan 3 14:13:22 2024] sd 10:0:0:0: [sdg] Very big device. Trying to use
READ CAPACITY(16).
[Wed Jan 3 14:13:22 2024] sd 10:0:0:0: [sdg] Attached SCSI disk
[Wed Jan 3 14:15:17 2024] usb 1-11: USB disconnect, device number 2
But, `fdisk -l' didn't display any information for /dev/sdg/. That's what I
looked for. After all the RAM drives, and the M.2 SSD drive, were the SCSI
SSD and HDD drives sda--sdf.
Why is the device type changed to `sd' from `scsi?'
I'll continue looking for sdg.
Regards,
Rich
